User manual MICROTEK MS4 - QUICK START

1 2 CHECK PACKING LIST 3 2 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. IDENTIFY REMOTE PARTS Remote Buttons Description Congratulations on your purchase! Be sure to check the following items are included with your projector. Main Parts Description 1. 2. 3. 4. 5. 6. 7. 8. 9 Projector Remote with battery Carrying case Computer cable (DVI-DB15) S-video cable Audio cable (mini jack-to-RCA x 2) CD-ROM (User's manual) Power cord USB cable Contact your dealer immediately if any parts are missing or damaged. 2 1. 2. 3. 4. 5. 6. 7. 8. IDENTIFY PROJECTOR PARTS Main Parts Description Turn lens to focus IR receiver Connect input/output devices Socket for power cable Side foot --adjusts level of projector Kensington security lock Height adjuster --adjusts level of projector Height adjuster button --push to adjust height Laser IR transmitter Status LED Auto Blank Enter Up cursor Right cursor Cursor pad Keystone top Keystone bottom Mute Right mouse Left mouse Volume down Volume up Down cursor Left cursor Menu Freeze Source Power 4 1. INSERT REMOTE BATTERY Remove the battery compartment cover by sliding the cover in the direction of the arrow. Insert the supplied batteries taking note of the polarity (+/-) as shown here. Replace the cover. Caution: Overheating can damage the projector. Do not block any of the air vents around the unit. 2. 3. -- Q uick Start Guide -- 5 2 MAKE CONNECTIONS 6 1. SET LANGUAGE Connect the power cord to the projector (A). Connect the other end to a wall outlet. The Power LED and Lampready LED turn on. Turn on the connected devices. Ensure the Lamp-ready LED is orange (not flashing) and then press the Power button to turn on the projector (B). The projector splash screen displays and connected devices are detected. Press the Menu button and then press the cursor button until Language is highlighted (C). Press the cursor button until the language you want is highlighted (D). Press the cursor or button to select the language. Press the Menu button twice to close the OSD. To finish your presentation, turn off the projector. Warning: As a safety precaution, disconnect all power to the projector and connecting devices before making connections. Label Description Connect an audio cable (not supplied) from the computer's audio-out connector. Connect the supplied audio cable (mini jackto-RCA x 2) from a video device. Reserved service port for firmware upgrades. Connect the supplied DVI cable from a computer. Connect a composite video cable (not supplied) from a video device. Connect the supplied S-video cable from a video device. Connect the USB cable (supplied) from a computer A Audio-in 2. 3. B C D RS-232 DVI-I 4. 5. 6. 7. 8. Video E E F S-video USB -- Q uick Start Guide -- 7 1. ADJUST PROJECTOR LEVEL To raise the level of the projector, lift the projector (A) and press the height adjuster button (B). The height adjuster drops down (C). 8 2 1. 2. 3. ADJUST IMAGE Use the Image-focus control (on the projector only) to sharpen the projected image (A). Use the Image-zoom control (on the projector only) to resize the projected image and screen size (B). Use the Keystone buttons to correct image-trapezoid (wider top or bottom) effect (C). 2. 3. To make minor adjustments, rotate the side foot (D). To lower the level of the projector, press the height adjuster button [B] and push down [A] on the top of the projector. NEED MORE INFORMATION? The CD-ROM that shipped with your projector features a detailed user's manual in a printer-friendly format. The user's manual includes detailed hardware, operation, and maintenance descriptions. You will also find troubleshooting procedures and instructions on securing the projector by means of the Kensington security lock. The projector has an On-Screen Display (OSD) that lets you make image adjustments and change various settings. To open the OSD, press the Menu button on the remote control. Use the remote Cursor buttons to navigate and make changes to the projector settings. Refer to the "On-Screen Display Settings" section of the CD-ROM user's manual for more information. -- Q uick Start Guide --