User manual OLYMPUS SP-500 UZ - QUICK START

1AG6P1P2778-- VH253801 Quick Start Guide SP-500 UZ Start Here For more information, please refer to the Basic & Advanced Manuals or visit: www.olympusamerica.com/support BEFORE YOU BEGIN Gather these items (box contents) Digital Camera Lens Cap/ Lens Cap String Strap AA (R6) Alkaline Batteries (four) USB Cable AV Cable OLYMPUS Master Software CD-ROM Items not shown: Advanced Manual (CD-ROM), Basic Manual, warranty card. Contents may vary depending on purchase location. GET STARTED a. Attach the strap and lens cap 1 2 b. Insert the batteries c. Set the date and time 1 Set the mode dial to h, and press the POWER button to turn the camera on. POWER Button Mode Dial 2 Press Z to display the top menu, and select 1 Unlock 3 Lift 4 Insert Z Button Date format SETUP MEM [MODE MENU] > [SETUP] > [X]. 3 Press s/r to set an item. Press p/q to select the next field. 3 4 2 Slide PIXEL MAPPING 2005 . 01 . 01 DUAL TIME SETUP '05.01.01 00:00 OFF m SELECT Y M D 00 : 00 SET GO OK m/ft Operation guide TAKE A PICTURE a. Zoom Zoom Out: Zoom In: Green Lamp b. Focus 1 Using the monitor, place the AF target mark over your subject. c. Take the picture 1 Press the shutter button completely to take the picture. Strap Eyelet DC-IN Jack CAMERA DIAGRAM Shutter Button Microphone Flash Multi-Connector Strap Eyelet (Pressed Halfway) (Pressed Completely) SQ1 1600 1200 1600×1200 AF Target Mark 4 Shutter Button Shutter Button Card Cover Card Slot Self-Timer Lamp/ AF Illuminator Lens Speaker Connector Cover 2 Press and hold the shutter button halfway to lock the focus. SQ1 1600 1200 1600×1200 4 SQ1 1600 1200 1600×1200 4 The green lamp indicates the focus and exposure are locked. Zoom Lever POWER Button Mode Dial [ Button/ Custom Button Viewfinder # Button (Flash pop-up) < Button (Print) u Button (Monitor/Viewfinder) # Button (Flash Mode) S Button (Erase) Card Access Lamp Arrow Pad (s/r/p/q) Battery Compartment Lock Battery Compartment Cover REVIEW OR ERASE A PICTURE a. Press the QUICK VIEW button The last picture taken will be displayed. Zoom Lever c. To erase a picture ERASE b. Take a closer look Pull the zoom lever toward T or W to zoom in or out. Press Z to return to the original size. Press the arrow pad (s/r/p/q) to scroll around. DISP./GUIDE Button QUICK VIEW Button YES NO Z Button (OK/MENU) SELECT GO OK Monitor S Button QUICK VIEW Button Previous Picture Arrow Pad Next Picture Press the QUICK VIEW button again to return to shooting mode. 1 Display the picture you want to erase. 2 Press the S button. 3 Select [YES], and press Z. The picture is permanently erased. Tripod Socket TRANSFER IMAGES a. Install the software 1 Insert the OLYMPUS Master CD-ROM. 2 Windows: Click the "OLYMPUS Master" button. Macintosh: Double-click the "Installer" icon. b. Connect the camera to the computer 1 Connect the camera and computer using the USB cable (included). The monitor will turn on automatically. c. Transfer images to the computer 1 With the camera now connected, open OLYMPUS Master. The [Transfer Images] window is displayed. [Transfer Images] window 2 Select the images you want to 1 USB Cable transfer, and click the [Transfer Images] button. 2 USB PC EASY PRINT CUSTOM PRINT EXIT 2 Select [PC] on the monitor, and press Z. If the [Transfer Images] window is not displayed automatically: a. Click the "Transfer Images" icon on the OLYMPUS Master main menu. Click the "From Camera" icon. [Transfer Images] button 3 Simply follow the on-screen instructions. Remember to register your camera when you install OLYMPUS Master or visit: www.olympusamerica.com/prodreg Your PC will now recognize your camera as a removable storage drive. SELECT GO OK b. Printed in Japan © 2005