User manual RIO VOLT SP65 - QUICK START

Prog. Refer to the manual for instructions on this feature. +10 Getting Started First Edition, March, 2001 Part Number 41000571-002 Skip 10 tracks ahead Mode Repeat Current Song Repeat All Songs in Directory All Repeat All Songs on CD S Shuffle CD 1S Repeat selected song or select a random song if Fast Forward is pressed All S D7Shuffle/Repeat All Songs in Directory All S Shuffle/Repeat All Songs on CD I Return to first track, Cycle through Intros 1 All D EQ How to Start: 1. Unpack the RioVolt and all of its components. 2. Plug the AC Adapter (included) into the Power Port OR Remove the Battery Door and insert 2 AA Alkaline batteries (included) and replace the Battery Door. 3. Plug the 8 Function Remote Control into the Headphones & Remote Port. 4. Plug the Headphones into the Remote Control. 5. Slide Release Latch to open the RioVolt. 6. Insert a music or digital audio CD into the RioVolt. 7. Snap lid shut. 8. Press and hold the Play/Pause button on the Joypad to turn the RioVolt on. NOTE: If the RioVolt display does not light up and the unit demonstrates no activity, check the Hold Switch on the RioVolt and on the Remote Control to make sure they are in the OFF position. Press to cycle through: (1) Normal, (2) Rock, (3) Jazz, (4) Classical, or (5) Ultra Bass OR Press and hold for 1.5 seconds for Menu Mode. Press the Joypad to make changes and selections. Fast Forward Next Menu/Select Rewind Go Back/Exit Play/Pause Toggles options (On/Off, 1x/2x, etc.) Stop Escape Menu Mode. 1. RESUME - When enabled, return to the same settings, file, and time (on same CD) after stopping or powering off RioVolt. 2. SPEED SCAN - Controls the speed at which you can scan through directories. (1x, 2x, 4x, 6x) 3. BEEP control - When enabled, pushing certain buttons will produce audible beeps. 4. LIGHT control (backlight) - Controls whether the backlight remains on or turns off when connected to an external power adapter. 5. EXT control - Controls whether file extensions (MP3, WMA, CD, & ASF) are displayed. 6. TAG control - Controls whether ID3 tag information is displayed. Volume Bar - Decrease + Increase Hold Switch Press once to access directories on CD. Press the Joypad to scroll through directories and to make selections. Fast Forward Next Menu/Select Rewind Go Back/Exit Play/Pause Move Up Stop Move Down Navi NOTE: The Hold Switch does not power the RioVolt on and off. ON - Locks buttons so the unit can not be activated. OFF - Unlocks buttons. Important Hints: · The Battery Indicator will appear in the upper corner of the display when battery life has diminished to approximately 20 percent or less. As your RioVolt is firmware upgradeable, you should occasionally check our website at www.riohome.com for upgrades to both the firmware and your RioVolt User Guide. For more indepth information on the features and usage of your new RioVolt, be sure to check the electronic RioVolt User Guide available on the RioVolt Installation CD. Mode Indicator · Hold Indicator Prog. Battery Indicator Indicator Joypad Play/Pause Press to play or to pause. Press and hold to turn on. Fast Forward Press to go to next track. Press and hold to fastforward through current track. Rewind Press to return to previous track. Press and hold to rewind through current track. Stop Press to stop. Press and hold to turn off. Refer to EQ and Navi functions for additional uses. · Display