User manual SANYO VWM-900 - QUICK START

Video Cassette Recorder QUICK SETUP GUIDE VWM-900 Welcome to SANYO, Thank you for choosing a SANYO VCR. This Quick Setup Guide will enable you to easily install and use your new VCR. For more detailed information, please refer to the instruction manual. INSTALLATION - It is important that the steps are carried out in the order shown. 1 A Connect the TV antenna cable (not supplied) to the ANT.IN connector on the back of the VCR. B Connect the supplied RF coaxial cable from the RF OUT (VHF/UHF/CATV) connector on the VCR to the TV's antenna input connector. C If your TV has audio/video input jacks, connect the VCR and TV using the audio and video cable (not supplied). (If your TV does not have A/V input jacks, just connect A and B .) D Connect the AC power cord only to an AC 120V, 60Hz outlet. 2 When the TV is connected to RF OUT (VHF/UHF/CATV) using only RF coaxial cable (supplied) While the VCR is turned off, V press and hold CHANNEL (V/v) on the front panel for more than five seconds (Indicators blinks as V below). Use CHANNEL (V/v) on the front panel to change the RF output channel (CH 03 or CH 04). · Select the same channel on the TV. Indicators on INDICATOR PANEL (CH 03) (CH 04) 3 When using the Audio/Video cable (not supplied) Set your TV to the VIDEO mode using the TV/VIDEO button on your TV. Direct audio/video connections usually result in a better picture and sound quality for tape playback. VIDEO AUDIO R IN OUT L IN OUT VHF/UHF /CATV LINE1(AUX1) ANT.IN VIDEO RF OUT SETTING THE VCR CHANNELS 1 Press MENU, and press v or V to select the TUNING menu, then press ENTER. 2 Press V to choose the SOURCE SELECT item, then press b or B to select TUNER. 3 Press v or V to choose the AUTO CHANNEL SET item, then press b or B to set the channel. The tuner will automatically cycle through all available channels in the area and place them in the tuner's memory. TUNING BAND setting is not required in this case. 4 After the AUTO CHANNEL SET PROCEEDING is complete, set the TUNING BAND (TV or CATV) on the TUNING menu. · Remember, TV is for the air antenna reception, CATV is for cable or wireless cable connection. vV · Use CH/TRACK (v/V) or CHANV NEL (V/v) on the front panel to cycle the VCR through the channels in memory. Using your SANYO VCR Full details of the functions are shown in the Instruction Manual. SETTING THE CLOCK: You must set the date and time for timer recording. 1 Press MENU, and press D or to select the CLOCK menu, then press ENTER. E 2 Set the "AUTO CLOCK SET" item to "ON" and set the "DAYLIGHT SAVINGS" and "TIME ZONE" if necessary. 3 Press MENU and turn off the VCR. The auto clock setting will starts. NOTE There are cases that TV station does not send or send wrong date and/or time information and VCR set the incorrect time accordingly. In this case we recommend that you set the clock manually. You can view the clock on the TV screen. Normally this screen is not displayed. If you want to display this screen, press ENTER. (Please refer to page 6.) TV SCREEN JUL 5 , MON 2:15 AM PLAYING A TAPE PREPARATION 1 Turn on the power of both the VCR and TV. 2 Be sure the TV is set to the VCR Output Channel (CH 3 or 4). 3 If a direct VIDEO/ AUDIO connection is made between the VCR and the TV, set the TV's source selector to VIDEO. NOTE If a tape without a safety tab is inserted the unit will start the playback automatically. 1 Insert a prerecorded video cassette. 2 Press PLAY to play back the tape. To make a picture still Press PAUSE during playback. To search at high speed Press FF or REW during playback. To play back at slow speed Press SLOW during playback. To fast-forward or rewind the tape Press FF or REW during stop. To play frame-byframe, press PAUSE repeatedly during still. To return to the playback mode, press PLAY. To return to the playback mode, press PLAY. To return to the playback mode, press PLAY. To eject the cassette Press EJECT. P/N: (8)3840R-Q003W-(1E12/03) Printed in Indonesia