56K PCI Faxmodem Quick Installation Guide for Windows 95, 98, Me, 2000, and XP Operating Systems English Français Model 5660A Model 5660A-BP Part Number R24.0484.00 U.S. Robotics Corporation 935 National Parkway Schaumburg, IL 60173-5157 USA No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from U.S. Robotics Corporation. U.S. Robotics Corporation reserves the right to revise this documentation and to make changes in the products and/or content of this document from time to time without obligation to provide notification of such revision or change. U.S. Robotics Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please contact U.S. Robotics and a copy will be provided to you. UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following: All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as "Commercial Computer Software" as defined in DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in U.S. Robotics standard commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.2277015 (Nov 1995) or FAR 52.227-14 (June 1987) whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide. Copyright © 2003 U.S. Robotics Corporation. All rights reserved. U.S. Robotics and the U.S. Robotics logo are registered trademarks of U.S. Robotics Corporation. All other company and product names may be trademarks of the respective companies with which they are associated. 1 Installation Instructions Prepare for installation. CAUTION: To avoid the risk of electrical shock, make sure your computer and all peripheral devices are turned off and unplugged. Disconnect all telephone cables from any existing modems before opening the computer's cover. Touch an unpainted metal area of your computer's case to ground yourself, which protects your equipment from electrostatic discharge. NOTE: U.S. Robotics recommends uninstalling any other modems that are installed in your system and unplugging all telephone cords connected to these modems. Refer to your previous modem's documentation for instructions. Write your new U.S. Robotics modem's serial number in the box below. The serial number is located on the white bar code sticker on the modem and on the modem's box. If you ever need to call our Technical Support department, you will need this number, your Product ID Number, and your Model Number to receive assistance. Product ID Number USR5660A USR5660A-BP Model Number 5660A 5660A-BP Serial Number Step 1: Physically install the modem in your computer. Turn off your computer and all peripheral devices. Unplug your computer and remove the computer's cover. Remove the expansion slot cover at the back of an empty PCI expansion slot. PCI slots are usually white in color. The slot cover is on the back of your computer and covers an opening on your computer's case. The slot cover could be held in place with a screw or a clip. Insert the modem into the PCI slot. You may need to rock the modem back and forth while pressing down firmly to properly seat the modem in the PCI slot. The modem's metal bracket will cover the opening on the back of the computer. If applicable, secure the modem with the screw or clip you removed. Replace the computer's cover. Step 2: Connect the modem to an analog phone line. Plug one end of the provided phone cord into the jack on the modem labeled . Plug the other end into an analog phone wall jack. When you are not using your modem, you can use a telephone by plugging the telephone's cord into the modem's jack. 2 CAUTION: The U.S. Robotics 56K PCI Faxmodem requires a standard analog telephone line. Do not connect your modem to a digital telephone line. Digital lines are commonly used in office buildings and hotels. If you are unsure whether your line is analog or digital, ask your network administrator or your local telephone company. Step 3: Install the modem drivers. All Operating Systems Reconnect your computer and peripherals and turn your computer on. NOTE: If at any time during the installation you are prompted to select the location of your installation drivers, the following is the correct location on the Installation CD-ROM (assuming D: is your CD-ROM drive). Windows Me/98/95 drivers - D:\ Windows XP/2000 drivers - D:\2000_XP Windows 95 Insert the Installation CD-ROM into your CD-ROM drive before Windows opens. You need to install both the U.S. Robotics V.92 PCI Faxmodem Enumerator and the U.S. Robotics V.92 PCI Faxmodem. NOTE: If at any time during the installation you are prompted to select the location of any installation files, the location of the files on the Installation CD-ROM is D:\ (assuming D: is your CD-ROM drive). When the New Hardware Found or Update Device Driver Wizard appears, follow the on-screen instructions. Windows 98 You need to install both the U.S. Robotics V.92 PCI Faxmodem Enumerator and the U.S. Robotics V.92 PCI Faxmodem. Log into Windows. Insert the Installation CD-ROM into your CD-ROM drive. When the Add New Hardware Wizard appears click Next. Select Search for the best driver for your device (Recommended) and click Next. Click Specify a location and type D:\ (If your CD-ROM drive uses a different letter, type that letter in place of "D"). Click Next. When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Faxmodem Enumerator, click Next. When Windows is finished installing the drivers, click Finish. The wizard will then detect and report a search for drivers for U.S. Robotics V.92 PCI Faxmodem. Click Next. Choose Search for the best driver for your device (Recommended) and click Next. Click Specify a location and type D:\ (If your CD-ROM drive uses a different letter, type that letter in place of "D"). Click Next. When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Faxmodem, click Next. When Windows is finished installing the software, click Finish. Windows Me You need to install both the U.S. Robotics V.92 PCI Faxmodem Enumerator and the U.S. Robotics V.92 PCI Faxmodem. 3 Log into Windows. Insert the Installation CD-ROM into your CD-ROM drive. When the Add New Hardware Wizard appears, select Specify the location of the driver (Advanced) and click Next. Make sure that Removable Media (Floppy, CD-ROM...) is not selected. Click Specify a location and type D:\ (If your CD-ROM drive uses a different letter, type that letter in place of "D"). Click Next. When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Faxmodem Enumerator, click Next. When Windows is finished installing the drivers, click Finish. The wizard will then detect and report a search for drivers for U.S. Robotics V.92 PCI Faxmodem. Choose Specify the location of the driver (Advanced) and click Next. Click Specify a location and type D:\ (If your CD-ROM drive uses a different letter, type that letter in place of "D"). Click Next. When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Faxmodem, click Next. When Windows is finished installing the software, click Finish. Windows 2000 Log into Windows. When the "Found New Hardware Wizard" screen appears, click Next then insert the Installation CD-ROM into your CD-ROM drive. Select Search for a suitable driver for my device (Recommended) and click Next. Click CD-ROM drives and click Next. When Windows locates the correct drivers for the PCI Simple Communications Controller, click Next. Click Yes to continue if a "Digital Signature Not Found" screen appears*. When Windows is finished installing the drivers, click Finish. Windows XP Log into Windows. When the Found New Hardware Wizard appears, insert your Installation CDROM into your CD-ROM drive. A "Hardware Installation" warning will appear*. Click Continue Anyway. When Windows is finished installing the software, click Finish. * U.S. Robotics has thoroughly tested in conjunction with the supported hardware and has verified compatibility with Windows 2000/XP. Software Installation Insert the Installation CD-ROM into your CD-ROM drive. The Installation CD-ROM window should automatically appear. If your Installation CD-ROM is already in the drive, and the Installation CD-ROM interface is not displayed, eject and reinsert the Installation CD-ROM. If the CD-ROM interface still does not appear, click Windows Start and then Run. Type D:\setup.exe in the "Run" dialog box. (If your CDROM drive uses a different letter, type that letter in place of "D.") Install the Instant Update software. The Instant Update software automatically notifies you of any updates to your modem's code. To install the Instant Update software: At the Installation CD-ROM interface, click Software, select U.S. Robotics Instant Update and then click Install. Then follow the on-screen instructions to install the Instant Update software. Install the Internet Call Notification software. Internet Call Notification enables the V.92 feature "Modem On Hold," which allows your Internet connection to be suspended when there is an inbound telephone call. If you are connecting to a 4 service provider that supports V.92, you will receive a message informing you of an incoming call. In addition, if you subscribe to Caller ID service, the number of the incoming call will be displayed in the computer's message window. You will then have the option to accept the call or to ignore it. If you choose to accept the call, another message will appear notifying you of the length of time that the provider's system will wait on hold before the data connection is terminated. You can then return to the connection when the call is completed without losing the connection. If you are connecting to a server that does not support V.92, you will receive a message informing you of an incoming call. You will then have the option to accept the call or to ignore it. If you choose to accept the call, your data connection will be terminated. To install the Internet Call Notification software: At the Installation CD-ROM interface, click Software, Internet Call Notification, and then Install. Follow the on-screen instructions to complete the installation of the software. Register your modem. When you register your modem online, U.S. Robotics will use your information to: · Enable your warranty. · Inform you of future product support notices, alerts, and changes to our support offerings. · Invite you to participate in market research, new product definition studies, and beta test programs. · Invite you to participate in promotional campaigns. We respect our customers' privacy. U.S. Robotics will not sell or provide any personal information that identifies you or any individual to any outside source. To register your modem: Connect to your Internet service provider. At the Installation CD-ROM interface, click Support and then click Registration and Warranty. Click the link to register your modem. You can also register your modem online at http://www.usr.com/productreg Uninstallation Instructions Step 1: Uninstall the modem drivers. Windows 95/98/Me · Click Windows Start, Settings, and then Control Panel. · Double-click Add/Remove Programs. · Select U.S. Robotics V.92 PCI Faxmodem and click Add/Remove. · Click Yes. · Click OK. Windows 2000 · Click Windows Start, Settings, and then Control Panel. · Double-click Add/Remove Programs. · Select U.S. Robotics V.92 PCI Faxmodem and click Change/Remove. · Click Close. Windows XP · Click Windows Start and then Control Panel. · Double-click Add or Remove Programs. · Select U.S. Robotics V.92 PCI Faxmodem. · Click Change/Remove. 5 · Click Close. Step 2: Finish removing the modem from the computer. CAUTION: To avoid the risk of electrical shock, make sure your computer and all peripheral devices are turned off and unplugged. Disconnect all telephone cables from any existing modems before opening the computer's cover. Touch an unpainted metal area of your computer's case to ground yourself, which protects your equipment from el ...