8288 490 000 Quick Operation Guide 24 Track Digital Recorder Model AUTO RTN CLIPBOARD AUTO RTN AUTO PUNCH AUTO PLAY IN OUT START IN OUT END PGM SEL EXIT/NO EXECUTE/YES 24TRACK DIGITAL RECORDER PREVIEW EJECT CHASE EDIT SETUP UNDO/REDO CHARACTER NEXT PREV LOCATE MEMORY DISP SEL STORE RECALL POWER 24bit 96kHz SHIFT TC READY TC GEN M.UNDO PREV TC NEXT TC TIME BASE SEL HOLD AUTO PUNCH REHEARSAL TAKE LOCATE VARI PITCH OPTICAL P.EDIT RECORD TRACK RECORD 6/14/22 7/15/23 8/16/24 TRACK SHIFT STOP PLAY REW F FWD 1/9/17 FOOT SW 2/10/18 3/11/19 4/12/20 5/13/21 ENVELOPE ALL INPUT ALL READY ACCESS 9-16 17-24 TRACK SHIFT CLIPBOARD PLAY LOCATE ABS 0 LOCATE REC END Introduction Items on "Preparation of the current drive," "Formatting the disk" and "Set up of the internal clock," which must be carried out upon purchasing D2424LV, are explained in this Quick Operation Guide. Before operating D2424LV, please read this manual and carry out preparations by carefully following the explanations. Although fundamental operating methods are also given here, to obtain utmost performance of D2424LV, it is also recommended to read the "Reference Manual" which is the main text. Model D2424LV Quick Operation Guide 2 Model D2424LV Quick Operation Guide CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. "WARNING" "TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE." SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. 6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. 10. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. 12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning - The appliance should be cleaned only as recommended by the manufacturer. 14. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8. Ventilation - The appliance should be situated so that its location or position dose not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 17. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 18. The appliance should be situated away from drops of water or spray of water. 19. Objects containing liquid such as vase must not be put on the appliance. 20. The appliance is not completely isolated from the power supply even if the power switch is at off position. 3 Model D2424LV Quick Operation Guide Contents Package contents.............................................................................................................................5 Recording media..............................................................................................................................5 Preparation for the current drive....................................................................................................6 Installing a hard disk in the caddy...................................................................................................6 Formatting a hard disk drive...............................................................................................................9 Checking the available recording time (REMAIN) on a formatted disk......................................11 Setup of the Internal Clock............................................................................................................12 Connecting a analog mixer...........................................................................................................13 Connecting a digital mixer.............................................................................................................14 Initial settings....................................................................................................................................15 About Sampling Frequency.............................................................................................................15 Basic recording...............................................................................................................................16 Basic analog recording.......................................................................................................................16 Undo and redo recording (single undo/redo)...............................................................................17 Basic digital recording.......................................................................................................................18 Multitrack recording using overdubbing....................................................................................20 Ping-pong recording......................................................................................................................20 MIxdown.........................................................................................................................................................21 Basic Locate function....................................................................................................................21 Recording in a new Program.........................................................................................................22 Changing the program FS.........................................................................................................23 Playback using the Vari-pitch function........................................................................................24 The D2424LV is not equipped with recording media for recording and playback. Please read the section from page 5 to prepare the recording media to record, playback, and edit data on the recorder. Fostex in not responsible for any direct or consequential damages caused by operating the recorder and/ or a connected E-IDE hard disk. It is prohibited by law to use materials recorded on the recorder from music CDs and/ or video tapes for which copyrights belong to a third party for commercial contents, broadcasts, sales, and/ or distribution, except for your personal entertainment. 4 Model D2424LV Quick Operation Guide Package contents Make sure that the package contains all the items listed below. The illustrations may not precisely match the appearance of the actual items. If you find that items are missing, contact your local dealer. Main unit Caddy Install a hard disk into this case. Refer to page "6" for more information. Detachable controller Hard disk fixing screws Use these screws to fix the hard disk to the caddy. Refer to page "7" for more information. Recording media The D2424LV is not equipped with any recording medium for recording/playback such as a hard disk drive (in this manual, we call the installed medium "current drive"). Therefore, to execute the multitrack recording using the D2424LV, you have to separately prepare a current drive. For a current drive, you can use any universal "E-IDE" hard disk drive* which has been tested and approved by FOSTEX. A hard disk drive can be installed in the removable case attached. The updated information on the operation-confirmed HD and backup media for D2424LV is mentioned in the following Fostex international web site. For those who are not able to check our web site, please contact Fostex distributor in your territory. 5 Model D2424LV Quick Operation Guide Preparation for the current drive The D2424LV has a slot for an optional hard disk. First you need to install a hard disk into the caddy included in this recorder package before you install it into the slot. The following instructions assume that you have already purchased an E-IDE hard disk unit. Prepare the following items for hard disk installation: Hard disk unit Fixing screws Caddy Be sure to turn off the power to the D2424LV (or remove the power cable from the AC outlet) before installing a hard disk. Installing a hard disk in the caddy First, you need to disassemble the caddy included in the package so that you can install a hard disk into it. · Disassembling the caddy 1.Apply your thumb to the edge of the case on the connector side as shown in the figure, and slightly pull the cover in the direction of the arrow. 2.Apply your thumbs to the side of the case and open the cover. In the same manner, open the cover on the other side. (Caution: Be careful not to pinch your fingers.) · A hard disk is a high-precision device. Do not apply any impact to the disk when and after you install it in the caddy. Do not leave the disk near a device that generates a strong magnetic field. Choose a level and stable surface for installation. Be careful not to injure yourself. Fostex is not liable for any malfunction or damage to the hard disk caused by mishandling. · You need to set the DIP (Jumper) switch on the hard disk to "Master" before you install it into the caddy. If the switch is set to "Slave," the hard disk will not function correctly. Refer to the instruction manual that came with your hard disk for more information on the DIP (Jumper) switch setting. 6 Model D2424LV Quick Operation Guide · Connecting cables 1.Connect the cables in the caddy to the connectors on the rear of the hard disk. As shown in the figure, first connect the power supply cable. Make sure that you connect the cables securely in the correct direction. Some connectors on the hard disks may be too tight to connect cables easily. Do not apply ...