User manual GARMIN GPSMAP 276C - Quick Reference

GPSMAP 276C Keys Finding Items 1. From any page, press FIND. 2. Highlight a category from the list, and press ENTER. 3. Highlight an item from the results list, and press ENTER. Going to a Destination 1. Use the ROCKER to highlight the item you want to navigate to on the Map Page. 2. Press NAV/MOB, and then press ENTER. 3. Follow the magenta route created on the Map Page. You can also use the Compass Page to help you navigate to the point. GPSMAPTM 276C Quick Reference Guide Antenna 256-Color TFT display with backlighting IN/OUT--press to zoom in or zoom out on the Map Page. PAGE--press to cycle through the main pages in sequence and return the display from a submenu page. Press and hold to switch between Marine Mode and Automotive Mode. QUIT--press to cycle through the main pages in reverse sequence, revert to the previous value in a data entry field, or cancel a function. ENTER/MARK--press to select a highlighted option, initiate entry, and then confirm. Press and hold to mark a waypoint. MENU--press to view Options Menu for the current page. Press twice to open the Main Menu. NAV/MOB--press to open the Navigation Menu window. In Marine Mode, press and hold to activate the MOB function. In Automotive Mode, press and hold to open the Next Turn Page and have the voice prompt announce the next turn. FIND--press to open the Find Menu. POWER--press and hold to turn the unit on and off. Press and release to adjust the backlighting and external speaker volume. ROCKER--press up, down, left, or right to select menu options, enter data, or move the pointer on the Map Page. To find a waypoint or other item from your current location: To Go To a highlighted map item: Backlit keypad for easy nighttime operation Find Menu Results List Antenna collapses for storage. Be sure the antenna is up (as shown here) to receive satellite signals. Battery pack. Press tab down to remove battery pack for replacement, if necessary. 1. From any page, press FIND. 2. Press MENU. Highlight Near Other, and press ENTER. 3. Select a reference location on the map, and press ENTER. The list changes to show items nearest to the new map location. 1. From the Map Page, use the ROCKER to pan to the location you want, and press FIND. 2. Highlight a category from the list, and press ENTER. 3. Highlight an item from the list, and press ENTER. To find an item from another location using the Find menu: Navigate Options with Map Feature highlighted Navigation shown on the Map Page (Marine Mode) To find an item from another location on the Map Page: 1. Press NAV/MOB. 2. Use the ROCKER to highlight Go To Point, and press ENTER. 3. From the Find menu, highlight Waypoints, and press ENTER. 4. Select a waypoint from the list, and press ENTER to open the Waypoint Review Page. 5. With the Go To button highlighted, press ENTER to begin navigation. To activate a Go To from the Find Menu: External power connector under weather cap USB connector under weather cap Port for optional data card 190-00335-01 Rev. B © Copyright 2004, 2005 Garmin Ltd. or its subsidiaries Printed in Taiwan Using the Man OverBoard (MOB) Function Use the MOB function to simultaneously mark and set a course to a location for quick response to emergency situations. 1. Press and hold the NAV/MOB key, or press the NAV/MOB key twice. 2. Press ENTER to confirm and begin navigating to the MOB location. Creating a Route To create a route using the Find Menu: 1. Press MENU twice to open the Main Menu. 2. Highlight the Route tab. 3. Highlight the first available blank route slot, and press ENTER. 4. Press ENTER again to find items to add to the route. Adding Via Points to Your Route To add Via Points to your route in Automotive Mode: 1. While navigating your route, press NAV/MOB. 2. Use the ROCKER to select Edit Vias, and press ENTER. The Add/Edit Vias Page appears. 3. With the Add Via Point button highlighted, press ENTER. Marking a Waypoint To mark your current location: 1. Press and hold ENTER/MARK until the New Waypoint Page appears. 2. To accept the waypoint with the default name and symbol, highlight OK and press ENTER/MARK. To change any information on the New Waypoint Page New Waypoint Page, highlight the appropriate field, and press ENTER/MARK. After entering and confirming your changes, highlight OK, and press ENTER/MARK. To initiate the MOB function: Route Tab MOB Confirmation Window Adding Points to the route Navigate Options Add Via Point To create a new waypoint using the Map Page: 1. Press PAGE until the Map Page appears. 2. Move the pointer to a map location or map feature. 3. Press and quickly release ENTER/MARK to capture the pointer location. If you have highlighted a map feature, an information page appears after you press ENTER/MARK. Use the ROCKER to highlight Save, and press ENTER/MARK to save the item as a waypoint. The New Map Waypoint Page appears. 4. To accept the waypoint with the default name and symbol, highlight OK, and press ENTER/MARK. To change any information on the New Map Waypoint Page, highlight the appropriate field, and press ENTER/MARK. After entering and confirming your changes, highlight OK, and press ENTER/MARK. When a MOB is initiated, an MOB waypoint with an international MOB symbol is created and the unit begins navigating to that point. Use any of the navigation pages to guide you back to the MOB point. The MOB waypoint is stored in the Waypoint list and can be deleted like any other waypoint. 1. 2. 3. 4. From the Route tab, highlight the first blank slot, and press ENTER. On the Route Review Page, press MENU to open the Options menu. Highlight Edit on Map, and press ENTER. Highlight a map item, and press ENTER. 5. When finished, press QUIT twice to return to the Route Review Page. To create a route graphically: 4. Highlight either Use Map or Find, and press ENTER. 5. If you selected Use Map, use the ROCKER to select an item on the map, and press ENTER. If you selected Use Find Menu, select an item from the Find menu. Remember you can press MENU while the Find menu is open to find an item near another location, such as the destination. 6. Highlight Done, and press ENTER to add the new Via Points. Options Menu Creating a new route on the map Before a Via Point is added Via Point added before the destination