User manual GOVIDEO DVR4400 - Quick Reference

Unpack Your DVD+VCR · · · · · · · · DVD+VCR Remote control 1.5V AA batteries (2) Coaxial cable Audio/video cable User's guide Read Me First/ Quick Reference Guide Warranty registration card Start Here Insert Batteries 1 2 3 Remove battery cover. Insert two 1.5V AA batteries, paying attention to the correct polarities (+/­). Replace cover. Audio/Video Cable Coaxial Cable :: Basic Connections The following connections are required in order to operate your DVD+VCR: 1 Connect Antenna to DVD+VCR Connect the coaxial cable from your antenna or cable TV jack to the IN (FROM ANT.) jack on the DVD+VCR back panel. 2 Connect DVD+VCR to TV Choose either RF Out or Line Out: a. RF Out Use if you have an older television with only a basic antenna input: Connect the supplied coaxial cable from the OUT (TO TV) jack on the DVD+VCR back panel to the antenna in jack on your television. b. Line Out Use for better sound and picture quality if your television has audio/video inputs: Connect the supplied audio/ video cable from the LINE OUT jacks on the DVD+VCR back panel to the line in jacks on your television. Power on DVD+VCR & TV Plug the DVD+VCR power cord into a standard 120V/60Hz wall outlet, and turn on your television and DVD+VCR. Select Channel 3 or Line If you used the RF Out connection, tune your television to channel 3. If you used the Line Out connection, set your television to its Line or Aux input · · · The Language/Langue/Idioma menu should appear on your television screen. Please proceed with Auto Setup. In order to view the setup menus, you MUST connect the DVD+VCR to your television with the RF or Line Out connec-ions, even if you plan t to use the S-Video or Component Video outputs. If you are not getting a good picture, try changing the RF Out- ut to p channel 4; see the User's Guide for details. Antenna DVD+VCR 3 4 Television Q uestions? O ur A ward-W inning C ustomer Service Professionals are R eady to H elp! STOP DO N O T R E TUR N TH IS PR O DUC T TO TH E STO R E ! C all Us! For Fast, Friendly Service 1-800-736-7679 E -M ail Us! For a Prompt Reply customerservice@sonicblue.com www.sonicblue.com T ha nk Yo u! · CD-ROM, CD-G, photo CD, and CD-i discs cannot be played on this DVD player. O r C heck O ur Website! For the Latest FA Q s :: Basic Controls Two Decks, One Set of Controls! DVD Key ­ Press to control the DVD (All deck control keys will operate the DVD) VCR Key ­ Press to control the VCR (All deck control keys will operate the VCR) TV Key ­ Press to control your TV (Certain keys will operate your TV) TV View Key ­ Press to change your on-screen view (Each press will select a different input source - from DVD to VCR to TV to Line 1 to Line 2 :: Basic Disc Playback To Play a DVD, CD or VCD 1 2 3 4 Press EJECT on the remote control or front panel to open the disc drawer. The DVD+VCR will power on automatically when you open the disc drawer. Place the disc in the drawer with the label side facing up. If the disc has two sides, place the disc with the desired side facing up. Press EJECT again to close the disc drawer. Press PLAY/PAUSE to begin playback. Many discs will begin playback automatically when the disc drawer closes. · If the DVD has a disc menu, or more than one title, the disc menu may appear. If so, press / and / to highlight menu items, then press SETUP/ENTER to make selections. :: Basic VCR Playback To Play a VHS Tape 1 2 Insert a VHS or S-VHS tape into the VCR deck. The DVD+VCR will power on automatically when you insert the tape. Press PLAY/PAUSE to begin playback. · If the tape is missing the record safety tab and Auto Play is turned on, the tape will begin playing automatically. ©2002 SONIC|blue Inc. All rights reserved.