FS-8000C FS-8000CD FS-8000CN Color Printer Quick Reference Guide Notice NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION OF THE PRODUCT. SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S NATIVE MODE OR ONE OF ITS EMULATION MODES. The information in this manual is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse any technical inaccuracies or typographical errors in the present edition. No responsibility is assumed if accidents occur while the user is following the instructions in this manual. No responsibility is assumed for defects in the printer's firmware (contents of its readonly memory). This manual, any copyrightable subject matter sold or provided with or in connection with the sale of the page printer, are protected by copyright. All rights are reserved. Copying or other reproduction of all or part of this manual, any copyrightable subject matter without the prior written consent of Kyocera Corporation is prohibited. Any copies made of all or part of this manual, any copyrightable subject must contain the same copyright notice as the material from which the copying is done. ©2001 Kyocera Corporation. All rights reserved. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. FS-8000C Quick Reference Guide Contents Guide to the information about the printer .................................3 Understanding the Error Messages ...........................................4 Loading Paper .........................................................................11 Clearing Paper Jams ...............................................................14 [Paper Jam -- Feeder # Cover] ..................................15 [Paper Jam -- Cassette #] ..........................................15 [Paper Jam -- MP Tray] .............................................16 [Paper Jam -- Duplexer Drawer] ................................16 [Paper Jam -- Paper Feed Unit] .................................17 [Paper Jam -- Side Cover] .........................................22 [Paper Jam -- Option Stacker] ...................................23 Toner Container Replacement ................................................24 Replacing the Toner Container ...................................25 Replacing the Waste Toner Bottle ..............................27 Replacing the Oil Unit ..............................................................29 Replacing the Maintenance Kit D (Separation Charger Unit) ..32 Cleaning the Printer .................................................................36 Cleaning the Paper Feed Unit .....................................36 Cleaning the Main Charger Unit ..................................38 2 Guide to the information about the printer The following documentation and CD-ROM are supplied: Quick Reference Guide (This brochure) This manual provides common information about the printer such as loading paper, understanding messages, etc. This manual can be retained in the plastic pocket at the printer. This guide is supplied as an online manual (PDF) in the CD-ROM. This guide fully details the information on the printer features, hardware, troubleshooting, printer driver handling, etc. This guide provides information on installing the printer and other options before starting to use. Operation Guide Installation Guide Kyocera Mita Digital This CD includes the printer software for Library CD-ROM Kyocera Mita printers such as printer drivers, network printer monitors, and various software utilities. Web site The latest versions of printer drivers and utilities are available at: http://www.kyocera.com/w2k/. 3 Understanding the Error Messages These messages appear on the printer's message display when the printer needs the operator's attention. For more details, refer to chapter 6 of the Operation Guide. Message Add paper (with paper source indication) Add staples Press GO Call service ####:0123456 Corrective Action The paper has run out in the paper source (paper cassettes, MP tray, or optional paper feeders). Supply paper according to the paper source displayed. The optional document finisher has run out of staples. Replenish staples and press the GO key. A mechanical error (#=0, 1, 2, ...). Contact your Kyocera Mita dealer for service. The printer does not operate when this message is displayed. The total number of pages printed is also indicated, e.g. 0123456. A controller error. Contact your Kyocera Mita dealer for service. The printer does not operate when this message is displayed. A data communication error between the printer controller and the operator panel. Contact your Kyocera Mita dealer for service. The printer does not operate when this message is displayed. No. 1 (topmost) paper cassette is not installed. Install the cassette. The cassette number can be 1(topmost) to 6 (bottom), or, for the FS-8000CD, 2 to 6 (bottom). Call service F####:0123456 Call service Person F0 Cassette 1 not loaded 4 Message Check waste toner bottle Clean printer Press GO Corrective Action The waster toner bottle is not installed or full. Install the waste toner bottle. The printer has reached the schedule to conduct cleaning. Clean the inside of the printer. After cleaning the inside of the printer, press the GO key and the printer will resume printing. This message is applicable to the FS8000CD only. The duplexer drawer is not installed. Install the duplexer drawer. The face-down tray has become full (approx. 500 pages). Remove all printed pages from the face-down tray. The face-up tray is not open although you have attempted to print in the face-up tray. Open the face-up tray. You have attempted to print a job that is not contained in the virtual mailbox. The hard disk installed in the printer is not formatted, and therefore cannot be read or written. The memory card inserted in the printer is not formatted, and therefore cannot be read or written. The front cover is open. Close the front cover. Duplex drawer not loaded Face-down tray paper full Face-up tray path error File not found Press GO Format error Hard disk Format error Memory Card Front cover open Hard disk err ## A hard disk error has occurred. Press the Press GO GO key to proceed. I/F occupied You have attempted to use the operator panel to change a setting on the interface from which data are presently being received. Wait until the printer finishes printing jobs on the interface. 5 Message ID error Corrective Action The user ID entered on the operator panel for a private job, or a stored job is not correct. Check the user ID that you specified on the printer driver. This message is displayed when you accidentally removed the memory card while the printer is reading it and you inserted the wrong memory card after urged by the printer to replace the memory card (Insert again). Remove the wrong memory card from the memory card slot and insert the correct memory card. Replace Maintenance Kit A or A2 which is displayed on your printer message window. Depending on the printer you have purchased, the maintenance kit may be type A or type A2. Replacement of the maintenance kit requires professional servicing. Contact your Kyocera Mita dealer. Replace Maintenance Kit B. Replacement of the maintenance kit requires professional servicing. Contact your Kyocera Mita dealer. Replace Maintenance Kit C. Replacement of the maintenance kit requires professional servicing. Contact your Kyocera Mita dealer. Replace Maintenance Kit D. Replacement of the maintenance kit requires professional servicing. Contact your Kyocera Mita dealer. Note: This message is not applicable for European countries and Australia. Insert the same memory card Install MK [A]or[A2] Install MK [B] Install MK [C] Install MK [D] 6 Message KPDL Error Press GO ## Corrective Action KPDL (PostScript) error has occurred. Press the GO key to resume printing. Or, you can abandon printing by the CANCEL key. The paper cassette (indicated by #) matching the paper size and paper type of the current job is empty. Load paper into the paper cassette. Press the GO key to resume printing. There is no paper cassette installed in the printer that matches the paper size and paper type of the current job. Set alternative paper in the MP tray. Press the GO key to resume printing. The memory card is accidentally removed from the memory card slot during reading. If you continue reading the memory card, insert the same memory card into the slot again. The printer again reads it from the beginning of the data. Also see Insert the same memory card on page 6. Load Cassette # (paper size)/(paper type) Load MP tray (paper size)/(paper type) Memory card err Insert again MemoryCard err## A memory card error has occurred. Press the GO key to resume. Press GO Memory overflow Press GO The total amount of data received by the printer exceeds the printer memory. Try adding more memory. Press the GO key to resume printing. You have attempted to duplex-print while the duplexer is not installed. Install the duplex unit. The stapler unit is not installed in the option document finisher. Install the stapler unit. Missing duplex unit Missing stapler unit 7 Message Missing toner TK-82 ####### Corrective Action Install the toner container using a toner kit for the particular color. The printer does not operate when this message is displayed. Option interface A failure has occurred with the option Error ## network interface card. Check the option network interface card installed in the printer. Option stacker cover open Option stacker paper full Option stacker path error Option tray ## paper full Paper feeder # Side cover open The cover of the optional output device (stacker, document finisher, or sorter) is open. Close the cover. The tray of the stacker is full. Remove paper sheets. The optional stacker, document finisher, or sorter is not installed properly. Correct the installation. A tray of the option sorter or the document finisher is full. Remove paper sheets in tray 01 to 09 as displayed in place of ##. The side cover of the paper feeder is open. Close the cover of the paper feeder 1 (topmost) to 3 (bottom) as displayed in place of #. A paper jam has occurred. The location of the paper jam is indicated in place of the #'s. For details, see section Clearing Paper Jams on page 14. After the paper cassette is closed, paper loading is in progress in the paper cassette. Paper jam ############### Paper loading 8 Message Print overrun Press GO Corrective Action The print job transferred to the printer was too complex to print on a page. Press the GO key to resume printing. (The page may break in some pages.). You can abandon printing by the CANCEL key. If Auto Continue is set to On, printing will be automatically resumed after a preset period of time. RAM disk error ## A RAM disk error has occurred. Look at Press GO the error code given in place of ## and refer to the printer's operation guide. To ignore the RAM disk error, press the GO key. Remove paper option tray ## Replace toner Clean printer Paper remains in optional sorter tray 1 to 9 as displayed in place of ##. Remove paper sheets. Two message items are displayed alternately. Toner has run out in the toner container(s). Replace the toner container using a new toner kit for the particular color. The printer does not operate when this message is displayed. For example, if Replace toner C,K is displayed, replace the cyan and the black toner containers. The MP tray is out of paper. Load paper and press the GO key. Open the side cover, then close tightly. Replace toner TK-82 ####### Set paper Press GO Side cover open 9 Message Toner low TK-82 ####### Corrective Action Replace the toner container using a new toner kit. #######: Color of the toner container that needs to be replaced. For example, `C' means the Cyan toner container. Unsupported external device A device not supported by the printer is installed. Install an optional stacker supported by the printer. Virtual mail box The storage area in the hard disk for the full virtual mailboxes is full. Print out accumulated jobs in the virtual mailboxes. Warning low memory The printer's internal memory is running low due to too many numbers of fonts and macros downloaded. Try deleting unnecessary fonts and macros. After this error has happened, turn off page protect mode. See the Operation Guide for details. 10 Loading Paper 1 Pull out the paper feed cassette until it stops. Lift the paper feed roller located on the right side of the cassette upright. Paper Stopper 2 Adjust the position of the paper guides according to the size of the paper you will use. See the next page. To move the paper guides, press the greencolored knobs. Paper Stopper 11 Align the paper stoppers correctly with the markings in the cassette that match the paper size: A4 12 A3 B4 B5 A5 Square the ...