Read this Quick Setup Guide before using the printer. Before you can use the printer, you must set up the hardware and install the driver. HL-6050/6050D/6050DN Step 1 Setting Up Your Printer Laser Printer Step 2 Installing the Driver Quick Setup Guide Installing the Driver USB page 14 Parallel page 17 Network (for HL6050DN) USB Network (for HL6050DN) page 24 page 27 page 29 page 30 Setup is Complete! For the latest driver and to find the best solution for your problem or question, access the Brother Solutions Center directly from the CD-ROM/Driver or go to http://solutions.brother.com Keep this Quick Setup Guide and supplied CD-ROM in a convenient place for quick and easy reference at all times. For Administrators Macintosh® Network Peer-toPeer (LPR / NetBIOS) page 19 Network Shared Printer page 22 Mac OS® 8.6 ­ 9.2 Mac OS® X 10.1 / 10.2 Mac OS® 8.6 ­ 9.2 Mac OS® X 10.1 /10.2 Macintosh® USB Windows® Network Windows® Parallel Windows® USB Setting Up Your Printer Table of Contents To Use the Printer Safely ..........................................................................................................................2 Regulations ...............................................................................................................................................3 Getting Started Carton Components ..................................................................................................................................5 Control Panel .............................................................................................................................................6 Supplied CD-ROM .....................................................................................................................................7 Step 1 Setting Up Your Printer Insert the CD-ROM into the CD-ROM Drive ..............................................................................................8 Install the Drum Unit Assembly .................................................................................................................9 Load Paper in the Paper Tray .................................................................................................................10 Print a Test Page .....................................................................................................................................11 Setting Your Language on the Control Panel ..........................................................................................12 Step 2 Installing the Driver For USB Interface Cable Users ...............................................................................................................14 For Parallel Interface Cable Users ..........................................................................................................17 For Network Interface Cable Users (For HL-6050DN) ............................................................................19 For Brother Peer-to-Peer Network Printer Users (LPR / NetBIOS) ...................................................19 For Network Shared Printer Users .....................................................................................................22 For USB Interface Cable Users ...............................................................................................................24 For Mac OS® 8.6 to 9.2 Users ...........................................................................................................24 For Mac OS® X 10.1 / 10.2 Users ......................................................................................................27 For Network Interface Cable Users (For HL-6050DN) ............................................................................29 For Mac OS® 8.6 to 9.2 Users ...........................................................................................................29 For Mac OS® X 10.1 / 10.2 Users ......................................................................................................30 For Administrators (HL-6050DN) Installing the BRAdmin Professional utility (Windows® Users Only) .....................................................................................................................32 Web BRAdmin (Windows® Users Only) ..................................................................................................32 Setting your IP Address, Subnet Mask and Gateway using BRAdmin Professional utility (Windows® Users Only) .....................................................................................................................33 Print Printer Settings Page ......................................................................................................................33 Factory Default Setting ............................................................................................................................33 Other Information Shipment of the Printer ............................................................................................................................34 Options ....................................................................................................................................................35 Troubleshooting User's Guide Chapter 6 1 Safety Precautions To Use the Printer Safely User's Guide Warning Indicates warnings that must be observed to prevent possible personal injury. Note Indicates cautions that must be observed to use the printer properly or prevent damage to the printer. Hint Indicates notes and useful tips to remember when using the printer. Network User's Guide Indicates reference to the User's Guide or Network User's Guide which is on the CD-ROM we have supplied. Warning There are high voltage electrodes inside the printer. Before replacing internal parts, cleaning the printer or clearing a paper jam, make sure you have turned OFF the power switch and unplugged the AC power cord from the AC power outlet/socket. Do not handle the plug or AC power cord with wet hands. This constitutes an electric shock hazard. After you have just used the printer, some internal parts of the printer are extremely hot. When you open the front cover or back cover of the printer, never touch the shaded parts shown in the illustration. Inside the printer (Front View) Open the Back Output Tray (Back View) The fuser unit is marked with a caution label. Please do Not remove or damage the label. 2 Regulations Federal Communications Commission (FCC) Declaration of Conformity (For USA) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Telephone: (908) 704-1700 "EC" Declaration of Conformity Manufacture Brother Industries Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Plant Brother Corporation (Asia) Ltd., Brother Buji Nan Ling Factory, Golden Garden Ind., Nan Ling Village, Buji Rong Gang Shenzhen, China declares, that the products Product name: Model number: Product options: Laser Printer HL-6050, 6050D and 6050DN HL-60 Lower Tray Unit LT-6000, Network Board NC-6100h complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ ­ ­ ­ Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Call the dealer, Brother Customer Service, or an experienced radio/TV technician for help. Herewith declare that: Products description: Product Name: Model Number: Laser Printer HL-6050, HL-6050D, HL-6050DN HL-60 are in conformity with provisions of the Directives applied: Low Voltage Directive 73/23/EEC (as amended by 93/68/EEC) and the Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/263/EEC and 92/ 31/EEC and 93/68/EEC). Standards applied: Harmonized: Safety: EN60950: 2000 EMC: EN55022: 1998 Class B EN55024: 1998 EN61000-3-2: 1995 + A14:2000 EN61000-3-3: 1995 Year in which CE marking was first affixed: 2003 Issued by: Date: Place: Signature: Brother Industries, Ltd. 6 August, 2003 Nagoya, Japan Important A shielded interface cable should be used to ensure compliance with the limits for a Class B digital device. Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user's authority to operate the equipment. Industry Canada Compliance Statement (For Canada) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Takashi Maeda Manager Quality Management Group Quality Management Dept. Information & Document Company International ENERGY STAR® Compliance Statement The purpose of the International ENERGY STAR® Program is to promote the development and popularization of energy-efficient office equipments. As an ENERGY STAR® Partner, Brother Industries, Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Radio interference (220-240 volt model only) This printer follows EN55022 (CISPR Publication 22)/Class B. Before you use this product, make sure that you use a following interface cables. 1. A shielded parallel interface cable with twisted-pair conductors and that it is marked "IEEE 1284 compliant". 2. A USB cable. The cable must not be more than 2.0 metres long. Laser Safety (100 to 120 volt Model Only) This printer is certified as a Class I laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. 3 FDA Regulations (100 to 120 volt Model Only) U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. One of the following labels on the back of the printer indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States. MANUFACTURED: Brother Industries, Ltd., 15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan This product complies with FDA radiation performance standards, 21 CFR subchapter J. IMPORTANT - For Your Safety To ensure safe operation the supplied three-pin plug must be inserted only into a standard three-pin power outlet that is properly grounded through the standard electrical wiring. Extension cords used with this printer must be three-pin plug type and correctly wired to provide proper grounding. Incorrectly wired extension cords may cause personal injury and equipment damage. The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the installation is completely safe. For your safety, if in any doubt about the effective grounding of the power, call a qualified electrician. Disconnect device MANUFACTURED: Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA This product complies with FDA radiation performance standards, 21 CFR Subchapter J Caution: Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. You must install this printer near a power outlet that is easily accessible. In case of an emergency, you must disconnect the power cord from the power outlet to shut off the power completely. Caution for LAN connection (For model HL-6050DN only) Connect this product to a LAN connection that is not subjected to over voltages. IT power sys ...