User manual BELKIN F1DJ102P-B - Quick Start

Introduction 1 Connecting the Keyboard, Video, and Mouse to the Console Ports on the Switch 2 Connecting Computers to the Switch This sheet will guide you through the basic steps needed to install the 2-Port KVM Switch (the Switch). If you have any problems during installation, please refer to the User Manual. 1. Power down all computers. 2. Connect your PS/2-type keyboard and mouse to the KEYBOARD and MOUSE ports located on the side panels of your Switch. 3. Take the video cable that is attached to your monitor and connect it to the VGA OUT port located on the side of the Switch. 1. Using an OmniView KVM Cable kit, take the VGA cable and connect the male end of the cable to the VGA port on the first computer. Connect the female end to the VGA 1 port on the side of the Switch. You will need the following items to install the 2-Port KVM Switch: · KVM Switch · One (each) keyboard, monitor, and mouse · One KVM cable kit per computer installed (included) 2. Connect one end of the PS/2 keyboard KVM cable to the keyboard port on the computer and the other end to the KEYBOARD 1 port on the side of the Switch. Recommended Cable Kit: F1D9000-XX PS/2 Style (-XX denotes the length in 6, 10, 15, and 25 feet) 2 Connecting Computers to the KVM Switch 3 Power on your Computers Belkin Corporation 3. Connect one end of the PS/2 mouse KVM cable to the mouse port on your computer and the other end to the MOUSE 1 port on the side of the Switch. You are now ready to use your Switch. Please refer to your User Manual for additional information. 501 West Walnut Street Compton · CA · 90220 · USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Express Business Park · Shipton Way · Rushden NN10 6GL · United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 2-Port KVM Switch Control two computers using one video monitor, and a PS/2 keyboard and mouse Belkin Components B.V. Starparc Building · Boeing Avenue 333 1119 PH Schiphol-Rijk · The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin Components, Ltd. 7 Bowen Crescent · West Gosford NSW 2250 · Australia Tel: +61 (0) 2 4372 8600 Fax: +61 (0) 2 4372 8603 Belkin Tech Support US: Europe: Australia: 310.898.1100 ext. 2263 800.223.5546 ext. 2263 00 800 223 55 460 1800 666 040 Repeat Steps 1 through 3 for each additional computer to be connected to the Switch, connecting them to the corresponding CPU ports on the side. P74226 © 2003 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Quick Installation Guide F1DJ102P-B