Introduction This sheet will guide you through the basic steps needed to install the 2-Port KVM Switch with Built-In Cabling (the Switch). If you have any problems during installation, please refer to the User Manual. 1 Connecting the Keyboard, Video, and Mouse to the Console Ports on the Switch 2 Connecting Computers to the Switch 1. Power down all computers. 2. Connect your PS/2-type keyboard and mouse to the KEYBOARD and MOUSE ports located on the front panel of your Switch. 3. Take the video cable that is attached to your monitor and connect it to the VGA port on the front panel of the Switch. 1. Using the attached cables, take the VGA cable and connect it to the VGA port on the first computer. 2. Connect the PS/2 keyboard KVM cable to the keyboard port on the computer. 3. Connect the PS/2 mouse KVM cable to the mouse port on the computer. You will need the following items to install the Switch: · 2-Port KVM Switch with Built-In Cabling · One (each) keyboard, monitor, and mouse Repeat Steps 1 through 3 for the additional computer to be connected to the Switch. 3 Power on your Computers Belkin Corporation 501 West Walnut Street Compton · CA · 90220 · USA Tel: 310.898.1100 Fax: 310.898.1111 Power up your computers. You are now ready to use your Switch. Please refer to your User Manual for additional information. Belkin Components, Ltd. Express Business Park · Shipton Way · Rushden NN10 6GL · United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 2-Port KVM Switch with Built-In Cabling Control two computers using one video monitor, and a PS/2 keyboard and mouse Belkin Components B.V. Starparc Building · Boeing Avenue 333 1119 PH Schiphol-Rijk · The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin, Ltd. 7 Bowen Crescent · West Gosford NSW 2250 · Australia Tel: +61 (0) 2 4372 8600 Fax: +61 (0) 2 4372 8603 Belkin Tech Support US: Europe: Australia: 310.898.1100 ext. 2263 800.223.5546 ext. 2263 00 800 223 55 460 1800 666 040 P74243 © 2003 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Quick Installation Guide F1DK102P ...