Start Here Easy Setup Instructions Color Bubble Jet Printer 1 Unpack the Printer 1 Carefully remove all items from the box. 2 Prepare the Printer 1 Remove the shipping tape from the printer. 3 Install the Print Head 1 Remove the print head from its package. 4 Install the Ink Tanks 1 Remove the black ink tank (BCI-24 Black) 5 Connect the Printer To Your Computer 1 Plug the power cord into the back of the from its packaging and pull off the orange protective cap. Protective cap printer and connect the other end to a power outlet. 2 Turn the print head over, then remove Shipping Tape the orange protective cap. NOTE: To avoid spilling ink, do not touch the bottom of the tank once you have removed the protective cap. Series Bubble Jet Printer 2 Open the front cover. Remove the packing material from the print head holder. 2 Insert the black ink tank into the slot on the right. Press down until the ink tank locks into place. NOTE: Do not touch the electrical contacts. Print Head IMPORTANT: BE SURE THE PRINTER IS OFF, or the computer will attempt to install the printer driver before the printer is ready. Electrical contacts 2 Connect one end of a USB cable (not Serial number Print head nozzles included) to the computer, the other to the printer. Power Cord Packing material 3 Raise the gray lock lever. 3 Repeat the procedure for the color ink Print head holder tank (BCI-24 Color), inserting it into the remaining slot. Ink Tanks BCI-24 Black BCI-24 Color NOTE: The serial number is located to the right of the print head. You will need this to register the product. 4 Slide the print head into the holder until it is securely seated. 4 Close the front cover. Pull out the paper rest and the output tray. USB Port USB Cable 5 Lower the gray lock lever until it locks Documentation and Software Kit into place. Continue with Step 6 on side two. NOTE: The "i320 Setup Software & User's Guide" CD-ROM contains printer drivers, software applications and electronic manuals. 6 Install the Printer Driver (Windows ) ® 6 Install the Printer Driver (Macintosh ) ® 7 Align the Print Head on the software to be installed. Follow the on-screen instructions. Before using the printer, align the print head to ensure the best quality printing. 1 Place a stack of blank paper in the W in do ws 1 Turn the computer on and LEAVE THE 6 When the driver installation is complete, M ac in to sh PRINTER OFF. NOTE: For Windows® XP or Windows 2000, log on to Windows as an Administrator before continuing. click Finish. IMPORTANT: Drivers included with this printer support Mac 8.6-9.x. For Mac OS X driver and instructions, go to www.canontechsupport.com. NOTE: Screen shots may differ depending on the operating system used. 7 From the Application folder, double-click 7 Register your product to ensure paper rest. 2 Start the alignment procedure. IMPORTANT: If you see the Found New Hardware Wizard, click Cancel. product support. Follow the on-screen instructions. 1 Turn the computer on and LEAVE THE Windows: 8 When the "Installation was successful" PRINTER OFF. Then insert the "i320 Setup Software & User's Guide" CD-ROM. screen displays, Restart your computer. 2 Open the printer driver folder on the 9 TURN THE PRINTER ON. Select the Apple a. For Windows XP select Start, Settings, then Control Panel, then click on Printers and Other Hardware, then Printers and Faxes. b. Right-click the Canon i320 icon, then click Printing Preferences. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When asked to start print head alignment, click OK. CD-ROM, then double-click the Installer icon. 8 When the software menu appears, click menu, then Chooser. 2 Close all software applications, then insert the "i320 Setup Software & User's Guide" CD-ROM. The setup program should run automatically. NOTE: If the CD-ROM does not run automatically, double-click My computer, then double-click the CD-ROM icon. Install. 10 Click on the i320 printer icon. 3 Read the License Agreement, then click Yes to continue. 4 When the main menu appears, click 3 Read the License Agreement, click Accept to continue. Install. 9 When the software installation is complete, 4 Click Install. The printer driver will load e. Wait about 60 seconds for the calibration sheet to print. Follow the on-screen instructions to complete print head alignment. Macintosh: a. From the File menu in a software application, click Page Setup. 11 Close the Chooser. NOTE: Register your product at www.registercanon.com to ensure product support. click OK, then Exit. automatically. 10 To ensure highest quality output, continue with Step 7 Align the Print Head. b. Click the Utilities button. c. Click the down-arrow to select Test Print. d. Click the Print Head Alignment icon. 5 When the Printer Port window appears, TURN THE PRINTER ON. The software will begin identifying the printer port being used. 5 If the message "No other applications can be running..." displays, click Continue. 12 To ensure highest quality output, continue with Step 7 Align the Print Head. 6 When the "Installation was successful" screen displays, click Restart. IMPORTANT: If your computer can not detect a printer port, refer to the Troubleshooting chapter in the i320 Quick Start Guide for instructions. e. Wait about 60 seconds for the calibration sheet to print. Follow the on-screen instructions to complete print head alignment. 3 Click OK (Windows) or Close then OK (Macintosh) when finished. QA7-2171-V01/082002A ©2002 Canon U.S.A. Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. PRINTED IN THAILAND ...