User manual CANON PIXMA MP510 - Quick Start

Photo All-in-One Quick Start Guide Getting Help from Canon Help Us Help You Better Before you contact Canon, please record the following information. Serial Number (located on the inside of the product): _________________________________________ Model Number (located on the front of the product): _________________________________________ Setup CD-ROM number (located on the CD-ROM): __________________________________________ Purchase Date: ______________________________________________________________________ Customer Technical Support Sequence* 1. Internet -- www.canontechsupport.com For quick and comprehensive self-help in an intuitively guided interactive troubleshooting environment, the place to start is our helpful tech support web site. In addition, the latest driver downloads, answers to frequently asked questions, product information, and "where to buy" instructions are found here. 2. Email Tech Support -- www.canontechsupport.com For individual attention to a special issue, try emailing our friendly technical support representatives, specially trained to communicate quick, easy, and logical solutions to your inquiries within 24 hours. 3. Toll-Free Live Tech Support -- (1-800-828-4040) This option provides live telephone technical support, free of service charges, MondaySaturday (excluding holidays), during your product's 1 year limited warranty period. Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752). 4. Extended Service and Support -- www.canonesp.com Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended service program that provides up to three full years of service and support coverage at a very attractive price. CarePAK offers toll-free Canon technical support and includes Canon's superb InstantExchange product replacement program. For further information about extending your Canon service and support, call (1-800-385-2155), or visit our Web site at www.canonesp.com. CarePAK must be purchased during your product's warranty period. For more information and updated program specifics, please visit our web site at www.canontechsupport.com. * Support program specifics are subject to change without notice. Photo All-in-One Quick Start Guide Canon PIXMA MP510 Photo All-in-One Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2006 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your Canon PIXMA MP510 Photo All-in-One. All statements, technical information and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be, representation or warranties concerning the products described. Specifications are subject to change without notice. As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the ENERGY STAR guidelines for efficiency. The International ENERGY STAR® Office Equipment Program is a global program that promotes energy saving through the use of computer and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, faxes and copiers. Their standards and logos are uniform among participating nations. All information regarding non-Canon products was compiled from publicly available information. No representation is made regarding the accuracy thereof. About Consumables Consumables (ink tanks / FINE Cartridges) are available for 5 years after production has stopped. Trademarks "Windows" and "Internet Explorer" are trademarks of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. "SmartMedia" is a trademark of Toshiba Corporation. "MEMORY STICK", "Memory Stick PRO", "MEMORY STICK Duo" and "Memory Stick Pro Duo" are trademarks of Sony Corporation. "xD-Picture Card" is a trademark of Fuji Photo Film Co., Ltd. "MultiMediaCard" is a trademark of Infineon Technologies AG. "SD Secure Digital memory card" and "miniSD Card" are trademarks of SD Association. "Bluetooth" is a trademark of Bluetooth SIG, Inc., U.S.A. and are licensed to Canon Inc. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 Bluetooth ID: B02954 Table of Contents Before Printing................................................2 Turning the Machine On and Off ....................2 Handling the Original Document.....................4 Loading Printing Paper ...................................6 Changing the Print Settings ..........................17 Cannot Print Properly from a Photo Index Sheet ............................................................ 76 Appendix....................................................... 77 Reading the On-screen Manuals.................. 77 Specifications ............................................... 78 Menu Items................................................... 81 Printing from Your Computer......................22 Printing with Windows...................................22 Printing with Macintosh.................................23 Safety Precautions....................................... 83 Legal Limitations on Use of Your Product and Use of Images .............................................. 86 Users in the U.S.A. ....................................... 87 Scanning Images ..........................................24 Scanning Methods ........................................24 Copying .........................................................25 Making Copies ..............................................25 Using Other Copy Functions.........................25 Index.............................................................. 91 Printing from a Memory Card ......................26 Memory Cards Supported by This Machine .26 Inserting the Memory Card ...........................27 Removing the Memory Card.........................28 Printing Photographs (Single-photo Print) ....28 Using Other Printing Functions.....................28 Printing Using the Photo Index Sheet...........29 Printing Photographs Directly from a Compliant Device ................................30 Printing from a PictBridge Compliant Device...........................................................30 Routine Maintenance ...................................34 Replacing an Ink Tank ..................................34 Keeping the Best Printing Results ................39 When Printing Becomes Faint or Colors Are Incorrect........................................................40 Printing the Nozzle Check Pattern................41 Examining the Nozzle Check Pattern ...........42 Print Head Cleaning......................................44 Print Head Deep Cleaning ............................46 Aligning the Print Head .................................48 Cleaning Your Machine ................................52 Troubleshooting ...........................................56 Error Message Is Displayed on the LCD ......57 LCD Cannot Be Seen At All or Is Hard to See ...............................................................59 An Unintended Language Is Displayed on the LCD...............................................................59 Cannot Install the MP Drivers .......................60 Cannot Connect to Computer Properly.........61 Print Results Not Satisfactory .......................62 Printing Does Not Start .................................67 Paper Does Not Feed Properly.....................68 Paper Jams...................................................70 Error Message Appears on the Screen ........72 Cannot Print Properly from a Digital Camera .........................................................74 1 Before Printing Turning the Machine On and Off Turn on the machine before printing. Turning on the Machine Before turning on the machine, confirm the following. The Print Head and ink tanks are set into place. If you are using the machine connected to a computer, confirm also the following. The machine is connected to your computer (or a compatible device). The MP Drivers are installed. Note If preparatory operations above are not complete, follow the Easy Setup Instructions to complete them. 1 Open the Operation Panel and press the ON/ OFF button to turn on the machine. The POWER lamp flashes green, and changes to steady, non-flashing light. Note If the ALARM lamp lights up or flashes orange and an error message is displayed on the LCD, see "Error Message Is Displayed on the LCD" on page 57. 2 If you are using the machine connected to a computer, turn on your computer. 2 Before Printing Turning off the Machine 1 To turn off the machine, press the ON/OFF button. When the POWER lamp stops flashing, the machine is turned off. Important About the Power Plug When removing the power plug after turing off the machine, be sure to confirm that the POWER lamp is not lit. If the power plug is removed from the wall outlet with the POWER lamp still lit or flashing green, the machine may become unable to print. See "Keeping the Best Printing Results" on page 39. The Screen-saver Mode The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore the display. You cannot change the wait time before the LCD goes out. Before Printing 3 Handling the Original Document This section describes how to load the original document on the Platen Glass. Original Document Requirements The original documents you load on the Platen Glass for copying or scanning must meet these requirements: Document type Size (W x L) Thickness Paper documents Photographs Books Max. 8.5 x 11.7 inches / 216 x 297 mm Max. 0.8 inches / 20 mm Loading Original Documents Load originals to copy or scan on the Platen Glass. Note Make sure any glue, ink, correction fluid, or the like on the original document is completely dry before loading it on the Platen Glass. 1 Load the original document on the Platen Glass. (1) Lift the Document Cover. (2) Load the original on the Platen Glass. Place the original face down on the Platen Glass. Align the upper left corner of your original with the alignment mark on the upper left corner of the Platen Glass. (1) (2) 4 Before Printing Important Do not place any objects weighing more than 4.4 lb / 2 kg on the Platen Glass. Do not press or put weight on the original with pressure exceeding 4.4 lb / 2 kg. Doing so may cause the scanner to malfunction or the Platen Glass to break. Note The machine cannot scan the area within about 0.04 inches / 1 mm from the far edge, and within about 0.04 inches / 1 mm from the left edge of the Platen Glass. You can also scan in originals that are up to 0.8 inches / 20 mm thick, such as books. Set them on the Platen Glass in the same way as paper documents. 2 Gently close the Document Cover. Before Printing 5 Loading Printing Paper This section describes how to load printing paper in the Auto Sheet Feeder and the Front Feeder. Paper Handling Recommended Paper and Requirements Media Type Model*1 Paper Support Load Limit Auto Sheet Feeder Plain Paper -- 0.52 inches / 13 mm Front Feeder Paper Printer Driver Thickness Setting for Lever Media Type Plain Paper 0.39 inches / Left 10 mm (A4, Letter, B5) Not loadable*3 Not loadable*3 Right Left Envelopes*2 High Resolution Paper*2 Super White Paper Glossy Photo Paper -- 10 envelopes Envelope High Resolution Paper Plain Paper HR-101N 80 sheets (A4, Letter) SW-201 0.52 inches / 13 mm (A4, Letter) 0.39 inches / 10 mm (A4, Letter) Left GP-401 10 sheets (A4, Letter), Not loadable*3 20 sheets (4" x 6" / 101.6 x 152.4 mm, Credit card) 10 sheets (A4, Letter), Not loadable*3 20 sheets (4" x 6" / 101.6 x 152.4 mm) 10 sheets (A4, Letter), Not loadable*3 20 sheets (4" x 6" / 101.6 x 152.4 mm) 10 sheets (A4, Letter, 5" x 7" / 127.0 x 177.8 mm), 20 sheets (4" x 6" / 101.6 x 152.4 mm) Not loadable*3 Left Glossy Photo Paper Glossy Photo GP-501 Paper "Everyday Use" Matte Photo Paper Photo Paper Plus Glossy*4 MP-101 Left Glossy Photo Paper Matte Photo Paper Photo Paper Plus Glossy Left PP-101 Left Photo Paper Plus Double Sided*2, *5 Photo Paper Plus Semigloss*4 PP-101D 1 sheet (A4, Letter, 5" x 7" / 127.0 x 177.8 mm) SG-101, SG-201 Not loadable*3 Left Photo Paper Plus Double Sided Photo Paper Plus Glossy 10 sheets (A4, Letter), Not loadable*3 10 sheets (8" x 10" / 203.2 x 254.0 mm)*6, 20 sheets (4" x 6" / 101.6 x 152.4 mm) 10 sheets (A4, Letter, 8" x 10" / 203.2 x 254.0 mm), 20 sheets (4" x 6" / 101.6 x 152.4 mm, Wide) Not loadable*3 Left Photo Paper Pro*4 PR-101 Left Photo Paper Pro 6 Before Printing Media Type Model*1 Paper Support Load Limit Auto Sheet Feeder Front Feeder Not loadable*3 Not loadable*3 Paper Printer Driver Thickness Setting for Lever Media Type Left Right Photo Paper Plus Glossy T-Shirt Transfers Photo Stickers*7, *8 T-Shirt Transfers*2 PS-101 TR-301 1 sheet 1 sheet Paper with a Model Number is Canon specialty media. You may not be able to purchase some Canon genuine papers depending on your country. *1 Paper is not sold in the US by Model Number. Purchase paper by name. *2 Available only when printing from your computer. *3 Feeding this paper from the Front Feeder can damage the machine. Load in the Auto Sheet Feeder. *4 When loading a stack of paper, the printed side may become marked when it is fed in. In this case, load paper one sheet at a time. *5 Cannot be used on a Macintosh®. *6 SG-201 only *7 You can specify the print setting easily by using the Easy-Photo Print provided with the Setup CD-ROM. *8 When copying onto sticker paper, be sure to select Sticker copy in Special copy in the Copy mode. Refer to "Creating Stickers (Sticker Copy)" in "Using Useful Copy Functions" of the User's Guide on-screen manual. When printing photos stored in a memory card to sticker paper, be sure to select Sticker print in Special photo print in the Memory card mode. Refer to "Printing on Stickers (Sticker Print)" in "Other Useful Functions" of the User's Guide on-screen manual. When printing photos saved on your mobile phone to sticker paper, select Sticker for paper size in Wireless print settings. Refer to "Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone" in the User's Guide on-screen manual. To specify the page size and media type when printing from your computer, refer to the Printer Driver Guide on-screen manual. To specify the page size and media type when printing photos saved on mobile phones, refer to "Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone" in the User's Guide on-screen manual. Note For a detailed description of printing media types, refer to "Printing Media" in the User's Guide onscreen manual. Media Types You Cannot Use Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the machine to jam or malfunction. Additionally, when printing on A5 or smaller sized paper, do not use paper thinner than a post card, including plain paper or notepad paper cut to a small size. Folded, curled, or wrinkled paper Damp paper Paper that is too thin (weighing less than 64 gsm / 17 lb) Paper that is too thick (non-Canon genuine paper weighing more than 105 gsm / 28 lb) Picture postcards Before Printing 7 Postcards affixed with photos or stickers Envelopes with double flaps Envelopes with sticker flaps Envelopes with an embossed or treated surface Any type of paper with holes Paper that is not rectangular Paper bound with staples or glue Paper with adhesives Paper decorated with glitter, etc. Photo Paper Pro Guidelines Do not touch the print surface until the ink is dry (approximately 30 minutes). Colors in dark images may appear indistinct at first, but will become clearer after approximately 30 minutes. Images may become smudged if you place printouts in an album before the ink is completely dry. We recommend to allow the ink to dry for 24 hours before placing your printouts in an album. Do not attempt to dry the ink with a hair dryer or by exposing printouts to direct sunlight. Do not store or display printouts in hot or humid conditions. Never expose them to heat or direct sunlight. Store printouts in photo albums, photo frames, or presentation binders to protect them from direct exposure to air or sunlight. Do not mount printouts in an adhesive-type album as you may not be able to remove them. Note that some types of clear plastic folders and albums may cause the edges of the paper to turn yellow. Using Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. Photo Quality Media Glossy Photo Paper Matte Photo Paper Photo Paper Plus Double Sided Photo Paper Plus Glossy Photo Paper Plus Semi-gloss Photo Paper Pro Photo Stickers Media Suited for Business Documents High Resolution Paper 8 Before Printing Using the Auto Sheet Feeder and the Front Feeder This machine offers two paper sources to load printing paper; the Auto Sheet Feeder, found at the top of the machine, and the Front Feeder, found at the front of the machine. Note You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. When using any other type of paper, load it in the Auto Sheet Feeder. For details on loading paper, see "Loading Paper" on page 12. (A) (B) (A) Auto Sheet Feeder (B) Front Feeder When Printing for the First Time At purchase, the machine is set to feed from the Auto Sheet Feeder. If you are printing without changing paper source settings, load paper in the Auto Sheet Feeder. Note For details on loading paper, see "Loading Paper in the Auto Sheet Feeder" on page 13. (A) (A) Load plain paper in the Auto Sheet Feeder. Before Printing 9 To Change the Paper Source The Auto Sheet Feeder lamp lights up when feeding from the Auto Sheet Feeder, and the Front Feeder lamp lights up when feeding from the Front Feeder. Before you print, make sure that the paper source selection matches the paper source where you actually loaded paper. To change the paper source, simply press the Paper Feed Switch. For details, see "Changing the Paper Source" on page 11. Note You can also select the paper source using the printer driver. For details on paper source selection using the printer driver, refer to the Printer Driver Guide on-screen manual. (A) (A) Press to change the paper source. Paper Source Selection Scenarios Deciding on the usage of the two paper sources to print with minimum reloading of paper depends on the variety of the type of paper you use regularly. If you print regularly on photo paper as well as on plain paper If you use photo paper as much as plain paper, you can load photo paper in the Auto Sheet Feeder and plain paper in the Front Feeder. This way, you can switch the paper source according to the type of paper just by pressing the Paper Feed Switch. Note You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. When using any other type of paper, load it in the Auto Sheet Feeder. For details on loading paper, see "Loading Paper" on page 12. (A) (B) (A) Auto Sheet Feeder: Load paper of various types and sizes, including photo paper (B) Front Feeder: Load A4, Letter, or B5-sized plain paper 10 Before Printing Changing the Paper Source Before printing, confirm that the location where you have loaded paper is selected as the paper source. Press the Paper Feed Switch to change the paper source. Important When Printing from Your Computer If Paper Feed Switch is not selected for Paper Source in the printer driver, the Paper Feed Switch on the machine will be disabled when printing. Confirm the setting in the printer driver. See "Printing with Windows" on page 22 or "Printing with Macintosh" on page 23. If a setting other than Paper Feed Switch is selected for Paper Source in the printer driver, the printer driver settings takes precedence when printing. For details on paper source selection using the printer driver, refer to the Printer Driver Guide on-screen manual. (A) (B) (C) (A) Auto Sheet Feeder lamp (B) Paper Feed Switch (C) Front Feeder lamp Note Press the Paper Feed Switch to select the paper source so that the Auto Sheet Feeder lamp is lit when feeding from the Auto Sheet Feeder, and the Front Feeder lamp is lit when feeding from the Front Feeder. Before Printing 11 Loading Paper Important If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x 86.0 mm (credit card-size) for a trial print, it can cause paper jams. You cannot print on postcards affixed with photos or stickers. Always load paper in portrait orientation (A). Loading paper in landscape orientation (B) can cause the paper to be jammed. (A) (B) Note For details on the specialty media Canon provides for use with its various printers, refer to "Printing Media" in the User's Guide on-screen manual. For detailed instructions on how to load specialty media into the machine, refer to "Printing Media" in the User's Guide on-screen manual. When Printing on Plain Paper You can use general copy paper or Canon's Super White Paper. When printing on both sides, we recommend Canon's Super White Paper Double-Sided. Paper size: ­ Standard sizes: A4, B5, A5 (Auto Sheet Feeder only), Letter, and Legal (Auto Sheet Feeder only) ­ Non-standard sizes for the Auto Sheet Feeder: 2.13" x 3.39" to 8.5" x 23" / 54.0 x 86.0 mm to 215.9 x 584.2 mm Paper weight: 17 to 28 lb / 64 to 105 gsm You can load up to 150 sheets of plain paper (17 lb / 64 gsm, 0.52 inches / 13 mm in height) in the Auto Sheet Feeder and up to 110 sheets of plain paper (17 lb / 64 gsm, 0.39 inches / 10 mm in height) in the Front Feeder. However, proper feeding of paper may not be possible at this maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to around half (around 0.2 inches / 5 mm in paper stack height). Do not stack more than 50 sheets in the Paper Output Tray. When Printing on 5" x 7", 4" x 6", or 2.13" x 3.39" (Credit Card-sized) paper Load paper only in the Auto Sheet Feeder. You can load up to 20 sheets of 4" x 6" or 2.13" x 3.39" (credit card-sized) paper and 10 sheets of 5" x 7" paper. We recommend using genuine Canon photo media when printing photographs. Refer to "Printing Media" in the User's Guide on-screen manual. 12 Before Printing Loading Paper in the Auto Sheet Feeder 1 Flatten the four corners of the paper before loading it. Note Align the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams. If paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat. See "Paper is curled." on page 65. To avoid curling, handle paper as follows. ­ Put unused paper back into the package and keep them on a level surface. ­ Take out only the necessary number of sheets from the package, just before printing. 2 Prepare to load paper. (1) Open the Sheet Feeder Cover and pull out the Paper Support. (2) Open the Front Feeder. (3) Extend the Paper Output Support. (4) Press the Paper Feed Switch so that the Auto Sheet Feeder lamp (A) lights. (5) Adjust the position of the Paper Thickness Lever. Set it to the right when printing on envelopes or T-shirt transfers, and left when printing on any other type of paper. See "Paper Handling" on page 6. (5) (2) (1) (A) (4) (3) Note You can also select the paper source with the printer driver. For details, refer to the Printer Driver Guide on-screen manual. Before Printing 13 3 Load the paper. (1) Load the paper in the Auto Sheet Feeder with the print side facing UP. (2) Align the paper stack against the Cover Guide on the right side of the Paper Support. (A) (1) (2) (3) Note Make sure that the Cover Guide is set upright when you load paper in the Auto Sheet Feeder. (3) Pinch the Paper Guide and slide it against the left side of the paper stack. Note When performing copy direct printing without using a computer, press Settings to select the page size of the loaded paper. When using the machine connected to a computer, select the page size of the loaded paper in Page Size in the printer driver. For details on printer driver settings, see "Printing with Windows" on page 22 or "Printing with Macintosh" on page 23. Do not load higher than the Load Limit Mark (A). Loading Paper in the Front Feeder You can load A4, Letter, or B5-sized plain paper (such as Canon Super White Paper SW-201) in the Front Feeder. You cannot load any other paper in the Front Feeder. 1 2 Flatten the four corners of the paper before loading it. See "Flatten the four corners of the paper before loading it." on page 13. Prepare to load paper. (1) Open the Front Feeder. (2) Extend the Paper Output Support. (3) Press the Paper Feed Switch so that the Front Feeder lamp (A) lights. (4) Set the Paper Thickness Lever to the left. (4) (1) (3) Note You can also select the paper source with the printer driver. For details, refer to the Printer Driver Guide on-screen manual. (2) (4) 14 Before Printing 3 Load the paper with the print side facing DOWN. (1) Load the paper in the Front Feeder with the print side facing DOWN and the leading edge to the far side. (2) Align the paper stack against the right edge of the Front Feeder. (3) Align the near and the left edges of the paper with the Paper Size Mark. (4) Pinch the Paper Guide and slide it against the left side of the loaded paper stack. (4) (2) (3) Do not load higher than the Load Limit Mark (A). (A) (1) Note When loading paper in the Front Feeder, refer to the illustration below and make sure not to load paper with the wrong side up. When performing copy direct printing without using a computer, press Settings to select the page size. When using the machine connected to a computer, select the page size of the loaded paper in Page Size in the printer driver. For details on printer driver settings, see "Printing with Windows" on page 22 or "Printing with Macintosh" on page 23. Before Printing 15 Loading Envelopes Envelopes must be fed from the Auto Sheet Feeder. Use either European DL or US Comm. Env. #10-sized envelope. Important You need to print from the computer to print on envelopes. Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals, or sticker flaps. Select either DL Env. or Comm. Env. #10 in the printer driver according to the envelope size you are using. If you do not, the address will be printed in the wrong direction. 1 Retract the Paper Support. Important Envelopes may not be fed properly if the Paper Support is extended. 2 Load the envelope against the Cover Guide (the right side of the Paper Support). Load with the front face UP and the rear flaps DOWN on the left. A maximum of 10 envelopes can be loaded at once. 5 3 1 *2 2 Important Make sure that the Cover Guide is set upright. 4 *1 Printing orientation *2 Make sure the flaps are folded. *1 3 4 5 6 Pinch the Paper Guide and slide it against the left side of the envelope. Press the Paper Feed Switch so that the Auto Sheet Feeder lamp lights up. Set the Paper Thickness Lever to the right. In the printer driver, select Envelope in Media Type, and then select DL Env. or Comm. Env. #10 in Page Size. For details on printer driver settings, see "Printing with Windows" on page 22 or "Printing with Macintosh" on page 23. 16 Before Printing Changing the Print Settings This section describes the Settings screen that can be specified on the Operation Panel when copying or when printing from a memory card. To Change the Print Settings You can change the print settings such as page size, media type, bordered or borderless print, etc. How to Change the Settings This section describes the procedure to change the settings, taking the steps to specify the page size for Memory card mode to 4" x 6" (101 x 152) as an example. For details on each item, see "Print Setting Items" on page 18. 1 Display the Settings screen. (1) Press the Settings button. The Settings screen is displayed. 2 Select the Setting tab. (1) Use the [ or ] button to select the Setting tab. Select tab 1 here. 3 Select the setting item. (1) Use the { or } button to select the setting item. Example: Select 8.5" x 11" (215 x 279) here. Before Printing 17 4 5 Change the setting. (1) Use the [ or ] button to change the setting. Example: Change to 4" x 6" (101 x 152) here. Complete setting. (1) Press the Settings button. The LCD returns to the Settings screen. Print Setting Items Each tab contains the following setting items. To change the tab, use the { button to select the tab and use the [ or ] button. Note Depending on the functions specified in the Copy or Memory card mode, some setting items cannot be specified in combination. Copy Mode This section describes the Settings screen for Copy mode. (1) (2) (3) (4) (5) Tab 1 You can specify the paper settings for printing or print quality. Note Paper size, media type, and print quality settings are specified for the paper source selected by the Paper Feed Switch. Confirm the selected paper source. (1) Specify the page size. 8.5" x 11" (215 x 279), A4, B5, A5, 4" x 6" (101 x 152), 5" x 7" (127 x 177), Credit card Important You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. When specifying a page size other than A4, 8.5" x 11" (215 x 279), or B5, load paper in the Auto Sheet Feeder. Note Some of these options are not available depending on the country of purchase. (2) Specify the media type. Plain paper, Photo Paper Pro, Photo Plus Glossy, Matte Photo Paper, Glossy Photo Paper Important You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. When specifying a media type other than Plain paper, load paper in the Auto Sheet Feeder. 18 Before Printing (3) Adjust image quality according to the original. Fast, Standard, High Note Fast can be selected when Plain paper is selected as the media type. If you used Fast with media type set to Plain paper and the quality is not as good as expected, select Standard or High and try copying again. Select High to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white. (4) You can specify the reduction or enlargement method. Same magnification, Preset ratio, Zoom (25-400%), Fit-to-page Tab 2 You can specify auto intensity. (5) Specify if auto intensity is performed. Auto intensity ON, Auto intensity OFF This function automatically adjusts the intensity of the original on the Platen Glass. Specifying Auto intensity ON automatically changes the icon above the intensity slide bar on the LCD to AUTO. Important Even while Auto intensity ON is selected, you can change the intensity by pressing the [ or ] button. Move the cursor to the center of the slide bar to enable auto intensity again. Memory Card Mode This section describes the Settings screen for Memory card mode. Tab 1 You can specify the settings such as the size and type of paper, bordered/borderless, and Date/ file no. (1) (2) (3) (4) (5) Note Paper size, media type, and print quality settings are specified for the paper source selected by the Paper Feed Switch. Confirm the selected paper source. You can change the print settings on this screen when a PictBridge compliant device is connected to this machine. Before Printing 19 (1) Select the page size. 8.5" x 11" (215 x 279), A4, 4" x 6" (101 x 152), 5" x 7" (127 x 177), Credit card Important You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. When specifying a page size other than A4 or 8.5" x 11" (215 x 279) load paper in the Auto Sheet Feeder. Note Some of these options are not available depending on the country of purchase. (2) Select the media type. Plain paper, Photo Paper Pro, Photo Plus Glossy, Matte Photo Paper, Glossy Photo Paper Important You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. When specifying a media type other than Plain paper, load paper in the Auto Sheet Feeder. (3) Select the print quality. Standard, High (4) Select bordered or borderless print. Bordered, Borderless Note When specifying Borderless, load paper in the Auto Sheet Feeder. When Plain paper is selected in Media type, you cannot select [Borderless]. (5) Select whether to print the shooting date, file no., or not. No date/file no., Print date only, Print file no. only, Print date & file no. Tab 2 You can optimize photos with the functions below. (1) (2) (3) (4) (5) (1) Activate/deactivate Vivid photo function. Makes green and blue more lively. Vivid photo ON, Vivid photo OFF (6) (7) (8) (2) Activate/deactivate the Photo Optimizer pro function. Automatically optimizes brightness and tone of a photo. Photo optimizer pro ON, Photo optimizer pro OFF (3) Activate/deactivate the Noise reduction function. Reduces the noise on blue areas like the sky as well as on black areas. Noise reduction ON, Noise reduction OFF 20 Before Printing (4) Activate/deactivate Face brightener function. Brightens a darkened face on the photo taken against the light. Face brightener ON, Face brightener OFF (5) Activate/deactivate Image optimizer function. Corrects and smooths the jagged contours for printing. Image optimizer ON, Image optimizer OFF (6) Adjust brightness. Brightness +2, Brightness +1, Brightness standard, Brightness -1, Brightness -2 (7) Adjust contrast. Contrast +2, Contrast +1, Contrast standard, Contrast -1, Contrast -2 (8) Adjust color hue. Color hue red +2, Color hue red +1, Color hue original, Color hue yellow +1, Color hue yellow +2 Before Printing 21 Printing from Your Computer This section describes the procedure for basic printing. Printing with Windows 1 2 3 4 5 Turn on the machine and load the paper in the machine. See "Turning the Machine On and Off" on page 2 and "Loading Printing Paper" on page 6. Make sure that the proper paper source is selected. See "Changing the Paper Source" on page 11. Create a document or open a file to print using an appropriate application software. Select Print on the application software's File menu. Make sure that Canon MP510 Printer is selected, and click Preferences (or Properties). 6 Specify the required settings and click OK. Make sure that Paper Feed Switch is selected in Paper Source. Note If you select Front for Plain Paper, the machine will automatically switch to the Front Feeder when Plain Paper is specified for Media Type. You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. For details on other printer driver functions, click Help or Instructions to view the online help or the Printer Driver Guide on-screen manual. Instructions is only displayed when the onscreen manuals are installed. 7 Click Print (or OK). 22 Printing from Your Computer Printing with Macintosh 1 2 3 4 5 Turn on the machine and load the paper in the machine. See "Turning the Machine On and Off" on page 2 and "Loading Printing Paper" on page 6. Make sure that the proper paper source is selected. See "Changing the Paper Source" on page 11. Create a document or open a file to print using an appropriate application software. Select Page Setup on the application software's File menu. Confirm that MP510 is selected in Format for. 6 Select the desired paper size in Paper Size. 7 Click OK. 8 Select Print on the application software's File menu. 9 Select Quality & Media in the pop-up menu. 10 Specify the required settings. Make sure that Paper Feed Switch is selected in Paper Source. Note If you select Front for Plain Paper, the machine will automatically switch to the Front Feeder when Plain Paper is specified for Media Type. You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. For details on other printer driver functions, click to view the Printer Driver Guide on-screen manual. If the on-screen manuals are not installed, the Printer Driver Guide on-screen manual is not displayed even if is clicked. 11 Click Print. Printing from Your Computer 23 Scanning Images You can scan images from the machine to a computer without printing them and save them in popular file formats, such as JPEG, TIFF, bitmaps, or PDF. If you are scanning printed text, you can use the OCR (Optical Character Recognition) software to convert it to text data. Scanning Methods Scanning Using the MP Navigator Using MP Navigator, you can scan originals loaded on the Platen Glass and view images saved on your computer or on a memory card. Scanned documents can be previewed and be easily printed and edited according to your needs. You can use the bundled software applications to edit or print the document you have scanned. For detailed operations of the MP Navigator, refer to the Scanning Guide on-screen manual. Scanning Using the Operation Panel of the Machine 1 2 3 4 5 Turn on the machine. See "Turning the Machine On and Off" on page 2. Load the original document on the Platen Glass. See "Handling the Original Document" on page 4. Press the SCAN button. Use the { or } button to select the scan operation, then press the OK button. Press the Color or Black button. The operation to be performed after scanning the original depends on the scan operation setting you have selected in step 4. For details on how to modify the operation settings, refer to the Scanning Guide on-screen manual. Scanning from an Application Software You can scan an image from a TWAIN- or WIA- (Windows® XP only) compliant application software and handle the scanned image in the application software. For detailed operations, refer to the Scanning Guide on-screen manual. 24 Scanning Images Copying Making Copies This section describes the basic procedure to make copies. 1 2 3 Turn on the machine, and load the printing paper. See "Turning the Machine On and Off" on page 2 and "Loading Printing Paper" on page 6. Make sure that the proper paper source is selected. See "Changing the Paper Source" on page 11. Specify copy settings. (1) Page size, media type, image quality, magnification The settings you made in the Settings screen of the Copy mode is displayed. (2) Number of copies Use the { or } button to specify the number of copies. (3) Intensity Press the [ button to decrease the intensity and the ] button to increase it. (2) (3) (1) 4 5 Load the original on the Platen Glass. See "Loading Original Documents" on page 4. Press the Color button for color copying, or the Black button for black & white copying. Using Other Copy Functions Reduced/Enlarged Copy Reduces or enlarges copies. Sticker Copy Makes stickers from 4" x 6" / 101.6 x 152.4 mm photos or graphics using Canon sticker paper. Borderless Copy Copies color images so that they fill the entire page without borders. Image Repeat Copies an image multiple times onto a single page. For the number of times to repeat the image, you can select from the machine's pre-defined settings or specify the number manually. Copying 25 Printing from a Memory Card Memory Cards Supported by This Machine The following memory cards are compatible with this machine. Memory cards that can be directly inserted into the Card Slot: Compact Flash (CF) Card Supports Type I/II (3.3V) Microdrive SmartMedia Supports 3.3V card only 1 MB and 2 MB cards are not supported MEMORY STICK MEMORY STICK PRO SD Secure Digital memory card MultiMediaCard (v3.31) Memory cards that can be inserted in the Card Slot using the adapter: xD-Picture Card*1 MEMORY STICK Duo*2 MEMORY STICK PRO Duo*2 Mini SD Card*2 *1 Requires purchase of a separate compact flash card adapter for xD-Picture cards. *2 Use the special adapter provided with the card. 26 Printing from a Memory Card Inserting the Memory Card 1 2 Turn on the machine. See "Turning the Machine On and Off" on page 2. Open the Card Slot Cover. 3 Insert one and only one memory card into the Card Slot. Card Type Compact Flash (CF) card Microdrive xD-Picture card* Insert into the left Card Slot. Inserting Card Lights up SmartMedia Lights up Insert into the right Card Slot. MEMORY STICK MEMORY STICK PRO MEMORY STICK Duo* MEMORY STICK PRO Duo* SD Secure Digital memory card MiniSD Card* MultiMediaCard (v3.31) Lights up Insert into the center part of the right Card Slot. * Be sure to attach the memory card to the special adapter before inserting it into the Card Slot. 4 5 Confirm that the Access lamp has lit up. Close the Card Slot Cover. Printing from a Memory Card 27 Removing the Memory Card 1 2 3 Open the Card Slot Cover. Make sure that the Access lamp is not flashing, then remove the memory card. Close the Card Slot Cover. Printing Photographs (Single-photo Print) 1 2 3 4 5 6 7 Turn on the machine, and load printing paper. Load paper other than A4, Letter, or B5-sized plain paper in the Auto Sheet Feeder. See "Turning the Machine On and Off" on page 2 and "Loading Printing Paper" on page 6. Make sure that the proper paper source is selected. See "Changing the Paper Source" on page 11. Insert the memory card into the Card Slot. See "Inserting the Memory Card" on page 27. Press the MEMORY CARD button. Use the [ or ] button to select Single-photo print, then press the OK button. Use the [ or ] button to display the photo to print, and press the Color button. Specify print settings. (1) Page size, media type, image quality The settings you made in the Settings screen of the Memory card mode is displayed. (2) Number of copies Use the { or } button to specify the number of copies. (2) (1) 8 Press the Color button. Using Other Printing Functions Multi-photo Print Prints specifying the number of copies to print for each photo. Layout Print Prints photos your pasted in the specified layout. Sticker Print Prints your favorite photo with a frame on Canon Photo Stickers. Print all photos Prints all photos saved on the memory card. 28 Printing from a Memory Card Photo index print Prints an index of all the photos saved on a memory card. DPOF print Prints according to the Digital Print Order Format (DPOF) settings on your digital camera, if you have specified them. Printing Using the Photo Index Sheet 1 2 3 4 5 6 7 8 9 Turn on the machine, and load A4 or Letter-sized paper. See "Turning the Machine On and Off" on page 2 and "Loading Printing Paper" on page 6. Make sure that the proper paper source is selected. See "Changing the Paper Source" on page 11. Insert a memory card into the Card Slot. See "Inserting the Memory Card" on page 27. Press the Photo Index Sheet button. Use the [ or ] button to select Photo Index Sheet print, then press the OK button. Use the [ or ] button to select a range of images to include in the Photo Index Sheet, then press the OK button. Press the Color button. Fill in the appropriate circles in the Photo Index Sheet. Load the type of paper you selected in the Photo Index Sheet. Load paper in the Auto Sheet Feeder. See "Loading Printing Paper" on page 6. 10 Press the Photo Index Sheet button. 11 Use the [ or ] button to select Scan sheet and print, then press the OK button. 12 Place the Photo Index Sheet face-down on the Platen Glass, then press the OK button.