User manual DELPHI ROADY 2 SA10085 - Quick Start

SA10085 Quick Guide Satellite Radio Receiver Important: This manual contains important safety and operating information. Please read and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your Roady2 and/or to your vehicle. Display sets one of four different display options. Power turns unit on and off manually. Memory saves song information. Press to save song information; press and hold for 3 seconds to retrieve song information. Menu contains 10 options (11 when in FM mode). Press to enter menu; use the Tuning Wheelto scroll through options and make selections.. See your Roady2TM User Guide for additional operating, installation, and safety information. Preset/Direct scrolls through three preset banks (A, B, and C) and Direct Entry. Tuning Wheel scrolls through channels, menu options, and channels within categories. Press Tuning Wheel in to make selection; press in and hold for 3 seconds to place a song on your TuneSelect list. Number Keys go directly to a channel when in Direct Entry Mode or to save (press and hold) and access presets when in preset bank A, B, or C. Category scrolls through XM® categories such as Rock, Country, News, etc. Use the Tuning Wheel to scroll within each category. Some Other Features to Know About... Basic Channel Selection Press the Preset/Direct button until "Direct Entry" displays, then: · Use Number Keys: Press the number keys in the bottom row to enter a channel number, for example 5 then 0 for channel 50 or 1 then 2 then 1 for channel 121. · Use the Tuning Wheel: Turn the Tuning Wheel on the corner of your Delphi XM Roady2 to increase or decrease channel number; then press it in to select that channel. Presets Your Delphi XM Roady2 has three banks of presets: A, B, and C. Each bank of presets can hold up to 10 channels. To set a preset, first go to the channel you want to set as a preset--make sure that it is playing. Then choose a preset bank where you wish to store it (use the Preset/Direct button). Then, press and hold (for 2 seconds) the number key you wish to use for that channel. The radio will beep once and display the preset number that has been set. To choose a preset channel, make sure you are in the right preset bank. (Press the Preset/Direct button until Preset A, Preset B, or Preset C appears.) Then, press the number key for the preset channel you wish to play. Menu The menu in your Delphi XM Roady2 lets you change the colors and contrast of the display, set the FM frequency, set the audio level, optimally position a home antenna, recall stored song titles and artist names, erase song titles from your TuneSelectTM list, enter and delete stock symbols from the stock ticker, activate or turn off Direct Tune, change your Auto-On and Auto-Off settings, and restore your unit to the factory default settings. See your Delphi XM Roady2 User Guide for an explanation of these features. Warning: When using this product it is always important to keep your eyes on the road and your hands on the wheel. Not doing so could result in injury to you or to others or in property damage. To access the menu, press the Menu button, then use the Tuning Wheel to move the cursor (press in to select an option). You can back up within the menu by pressing the Menu button. The menu times out and returns to the normal display after approximately 8 seconds if you do not move the cursor or make any choices. TuneSelect TuneSelect notifies you when a favorite song is playing on a channel other than the one where you are currently tuned. To store a song title in TuneSelect, press and hold the Tuning Wheel in for 2 seconds while listening to a song that you want to put on your TuneSelect list. The radio will beep once and display "Song Selected." Later, when any song on your list is playing on another channel, the radio will beep once and display the song name. Press the Tuning Wheel in to go to the channel where the song is playing. You can use the menu to erase songs from your TuneSelect list. Stock Ticker You can track the performance of up to 20 stocks with your Delphi XM Roady2 receiver. Use the menu to select specific stocks and then use the display key to select display mode 4 in order to view the ticker. FM Modulator The Roady2 wireless FM modulator is automatically turned on whenever the Roady2 is turned on without a connector attached to the audio-in jack on the side. Select "FM Frequency" in the menu to set a specific frequency. The Roady2 name, XM name, and related logos are trademarks of XM Satellite Radio Inc. Printed on Recycled Paper ©2004 Delphi Corporation. All rights reserved. DPSS-04-E-031