User manual FUJIFILM FINEPIX E510 - Quick Start

E500/ Mode dial Auto Portrait Landscape Sports Night scene Shutter button Self-timer lamp Programmed Auto Shutter-priority Auto Aperture-priority Auto Manual Movie Power button E510 Camera Controls Mode switch Viewfinder lamp Viewfinder Flash pop-up button Photography mode Playback mode W (Wide zoom) button T (Tele zoom) button Photo mode ( Flash Viewfinder window Microphone Lens (Lens cover) Adapter ring release button Flash control sensor A/V OUT (Audio / Visual output) socket 4-direction (abdc) button (USB) socket Cradle connection socket Terminal cover Speaker DC IN 3V (power input) socket d/ c/ (Macro) button (Flash) button Tripod mount Exposure compensation button LCD monitor ) button MENU/OK button Strap mount DISP (Display) button BACK button Battery cover Battery cover lock release button xD-Picture Card slot Battery compartment BL00403-200(1) E Picture Taking Refer to Owner's Manual for more detailed instructions A. Loading the batteries 1 1 0 2 0 1.Check that the camera is turned off (viewfinder lamp is off) before opening the battery cover. 1 Hold down the Battery cover lock release button. 2 Open the battery cover. 2.Load the batteries correctly as shown left. 4 4.You can select your preferred date format. Press "d" or "c" to select the date order, Year, Month, Day, Hour or Minute. Press "a" or "b" to correct the setting. Press the "MENU/OK" button after you complete the setting. 2 *Refer to owner's manual for date/time setup. C. Taking a picture 1 B. Setting up the camera 1 1.Align the gold mark on the xD-Picture Card slot with the gold contact area on the xD-Picture Card and then push the card firmly all the way into the slot. 2.Close the battery cover. 1.Set the Mode switch to "q". 2.Press the shutter button down half way to adjust the focus. 3.Press the shutter button down fully to take a picture. The camera makes a "Click" sound and takes the picture. Gold marking 2 Bebeep 3 Click 2 D. Viewing a picture 1 3 3.Press the "POWER" button to turn the camera on. When turning the camera on, the viewfinder lamp lights green. 2 1.Set the Mode switch to "w". 2.Press the "d" or "c" to move through your images. Still images that can be viewed on the FinePix E500/FinePix E510 You can use this camera to view still images recorded on the FinePix E500/FinePix E510 or still images (excluding some uncompressed images) recorded on a FUJIFILM digital camera that supports xDPicture Card. FGS-406106-FG Viewing images on your PC A.Install Software B.Connect a Camera to PC C.Save Images A. Install Software Do not connect the camera to your PC until the software installation is completed. 1. Turn on your PC and start up Windows. by using a system administrator account (e.g. "Administrator"). Windows XP q The "Found New Hardware" help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required. w Specify the settings in the "AutoPlay" dialog box. e Select "Viewing images using FinePixViewer" and then select the "Always do the selected action" checkbox. ! Users of Windows 2000 Professional or Windows XP should log in 2. Quit all other active applications until no applications are shown in the taskbar. 3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically. 4. The Setup screen appears. Click the [Installing FinePixViewer] button. r Click the [OK] button to launch FinePixViewer. 5. After installation completed, press [Restart] button. B. Connect the Camera to your PC 1. Load an xD-Picture Card containing photographed images into your camera. 2. Set the "USB MODE" setting in the "SET-UP" menu to digital camera "¶". (Refer to "USING THE SET-UP SCREEN" in the owner's manual.) C. Save Images 1. The Save image Wizard starts up. Click the [NEXT] button. 2. Check that the files are downloaded from the camera to your PC and that a folder with the date is created. Ex. \My Documents \ My Pictures \ 2004_0312 Image 3. Turn your camera off. 4. If you have one, plug the AC power adapter connector into the "DC IN 3V" socket on the camera and then plug the adapter itself into the main power outlet, otherwise be sure your battery is fresh and charged. 5. Use the USB cable (included) to connect the camera to your PC. Camera (USB) socket D. View Images 1. Click the [Show List of Images] button. AC-3V (Sold separately) USB socket 2. Select "Preview" in the View menu to display an enlarged image. PC 6. Turn the camera on. 7. Windows 98/98 SE/Me/2000 Professional FinePixViewer starts up automatically. For more information Refer to "How to use FinePixViewer" in the HELP menu, or chapter 5 and 6 in the Owner's Manual, or visit Fujifilm "Q&A Search" in the following website. ( http://home.fujifilm.com/products/digital/ ) For Macintosh users, refer to chapter 5 and 6 in the Owner's Manual.