User manual FUJIFILM FINEPIX F20 - Quick Start

F20 Camera Controls POWER button Shutter button Mode switch Lens (lens cover) Flash AF-assist illuminator Self-timer lamp Terminal cover Microphone A/V OUT (Audio/ Visual output) socket USB socket DC IN 5V socket Indicator lamp w (Playback) button 4-direction (nopq) button LCD monitor Speaker MENU/OK button Tripod mount xD-Picture Card slot Battery compartment Battery release catch Picture stabilization (Anti-blur) button DISP (Display)/BACK button Battery cover W (Wide zoom) button T (Tele zoom) button Photo mode (p) button Strap mount BL00556-200(1) E Picture Taking Refer to Owner's Manual for more detailed instructions A. Loading the Battery Battery release catch 5. DATE / TIME NOT SET You can select your preferred date format. 12:00 AM YY.MM.DD 1. 1 SET NO Hold the battery so that the indicators are aligned. Push the battery release catch aside while loading the battery. Check that the battery is firmly held in place. B. Charging the Battery 1. Plug the AC power adapter connector into the DC IN 5V socket on the camera. 3. 4. Plug the connecting cable into the power outlet. When connecting is completed, battery charging begins. Charging ends when the indicator lamp turns off (about 2.5 hours). Fully pressed C. Setting up the Camera 1. 2. START MENU / LANG. OP EN 6. Indicators Press p or q to select Year, Month, Day, Hour, or Minute. Press n or o to correct the setting. Refer to the Owner's Manual for "Turning On and Off". D. Taking Pictures 1. 2. Press POWER button down fully to turn the camera on. Set the Mode switch to q. 3. 2. Plug the connecting cable into the AC power adapter. Double beep Press the shutter button down halfway to adjust the focus. Halfway pressed 4. Click Press the shutter button down fully to take a picture. The camera makes a "Click" sound and takes the picture. Press POWER button down fully to turn the camera on. screen appears on the LCD monitor. E. Viewing the Images 1. 2. Press w. Press p or q to move through your images. SET NO 3. 4. Press n, o, p, or q to select the language. Press MENU/OK to confirm the setting. FinePix F20 has internal memory that can store images without xD-Picture Card. Use an xD-Picture Card (sold separately) when recording a large number of images. Still images that can be viewed on FinePix F20 You can use this camera to view still images recorded on FinePix F20 or still images (excluding some uncompressed images) recorded on a FUJIFILM digital camera that supports xD-Picture Card. FPT/Y-608106-PY Viewing Images on your PC A.Installing Software B.Connecting the Camera to your PC C.Saving the Images A. Installing Software Do not connect the camera to your PC until the software installation is completed. 1. Turn on your PC and start up Windows. ! Users of Windows 2000 Professional or Windows XP should log in by using a system administrator account (e.g. "Administrator"). Windows XP The "Found New Hardware" help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required. FinePixViewer starts up automatically. 2. Quit all other active applications until no applications are shown in the taskbar. 3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically. 4. The Setup screen appears. Click the [Installing FinePixViewer] button. 5. After installation completed, press [Close] button. C. Saving the Images 1. The Save Image Wizard starts up. Click the [Start] button. 2. Check that the files are downloaded from the camera to your PC and that a folder with the date is created. Ex. \My Documents \ My Pictures \ 2006_0724 B. Connecting the Camera to your PC 1. Insert the xD-Picture Card with images into the camera. 2. Connect the camera to your PC using the USB cable (included). D. Viewing the Images 1. Click the [Show List of Images] button. ; USB socket AC-5VC 3. Press w for about 1 second to turn the camera on in Playback mode. 4. Windows 98/98 SE/Me/2000 Professional FinePixViewer starts up automatically. 2. Select "Preview" in the View menu to display an enlarged image. For more information Refer to "How to use FinePixViewer" in the HELP menu, or "Software Installation" in the Owner's Manual, or visit Fujifilm "Q&A Search" in the following website. ( http://www.fujifilm.com/products/digital/ ) For Macintosh users, refer to "Software Installation" in the Owner's Manual.