User manual FUJIFILM FINEPIX F31FD - Quick Start

F31 Camera Controls POWER button Shutter button Mode dial Lens (lens cover) Flash AF-assist illuminator /Self-timer lamp Infrared port Terminal cover Microphone A/V OUT (Audio/ Visual output) socket USB socket DC IN 5V socket Indicator lamp 4-direction (nopq) button LCD monitor Speaker Tripod mount xD-Picture Card slot Battery compartment Battery release catch W (Wide zoom) button T (Tele zoom) button w (Playback) button Photo mode (p) button Strap mount MENU/OK button Intelligent Face Detection button D Exposure compensation button DISP (Display)/BACK button Battery cover BL00581-200(1) E Picture Taking Refer to Owner's Manual for more detailed instructions A. Loading the Battery Battery release catch 5. DATE / TIME NOT SET You can select your preferred date format. 12:00 AM YY.MM.DD 1. 1 SET NO 6. Indicators Make sure that the indicators are aligned. Push the battery release catch aside while loading the battery. Check that the battery is firmly held in place. Press p or q to select Year, Month, Day, Hour, or Minute. Press n or o to correct the setting. Refer to the Owner's Manual for "Turning On and Off". D. Taking Pictures 1. 2. Press POWER down fully to turn the camera on. Set the Mode dial to q. B. Charging the Battery 1. Plug the AC power adapter connector into the DC IN 5V socket on the camera. 2. Plug the connecting cable into the AC power adapter. 3. Double beep Press the shutter button down halfway to adjust the focus. Halfway pressed 3. Plug the connecting cable into the power outlet. When connecting is completed, battery charging begins. Charging ends when the indicator lamp turns off (about 4 hours). 4. Click Press the shutter button down fully to take a picture. The camera makes a "Click" sound and takes the picture. 4. Fully pressed C. Setting up the Camera 1. 2. START MENU / LANG. E. Viewing the Images 1. 2. Press w. Press p or q to move through your images. screen appears on the LCD Press POWER down fully to turn the camera on. monitor. SET NO 3. 4. Press n, o, p, or q to select the language. Press MENU/OK to confirm the setting. FinePix F31fd has internal memory that can store images without xD-Picture Card. Use an xD-Picture Card (sold separately) when recording a large number of images. Still images that can be viewed on FinePix F31fd You can use this camera to view still images recorded on FinePix F31fd or still images (excluding some uncompressed images) recorded on a FUJIFILM digital camera that supports xD-Picture Card. FPT/Y-608110-PY Using Intelligent Face Detection With Intelligent Face Detection, the subject's face(s) is detected and focused on automatically, so you can take a picture of people in most suitably lit conditions. Intelligent Face Detection will even detect and focus on two faces on opposite sides of the frame, where ordinarily the background in the center of the frame would be focused. In addition, Intelligent Face Detection adjusts for the brightness of the faces. to zoom in on a face when playing back the image taken with Intelligent Face Push Detection. 10 / 24 / 2006 10:00 AM Viewing Images on your PC A.Installing Software B.Connecting the Camera to your PC C.Saving the Images A. Installing Software Do not connect the camera to your PC until the software installation is completed. 1. Turn on your PC and start up Windows. ! Users of Windows 2000 Professional or Windows XP should log in by using a system administrator account (e.g. "Administrator"). Windows XP The "Found New Hardware" help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required. FinePixViewer starts up automatically. 2. Quit all other active applications until no applications are shown in the taskbar. 3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically. 4. The Setup screen appears. Click the [Installing FinePixViewer] button. 5. After installation completed, press [Close] button. C. Saving the Images 1. The Save Image Wizard starts up. Click the [Start] button. 2. Check that the files are downloaded from the camera to your PC and that a folder with the date is created. Ex. \My Documents \ My Pictures \ 2006_1024 B. Connecting the Camera to your PC 1. Insert the xD-Picture Card with images into the camera. 2. Connect the camera to your PC using the USB cable (included). D. Viewing the Images 1. Click the [Show List of Images] button. ; USB socket AC-5VC 2. Select "Preview" in the View menu to display an enlarged image. 3. Press w for about 1 second to turn the camera on in Playback mode. 4. Windows 98 SE/Me/2000 Professional FinePixViewer starts up automatically. For more information Refer to "How to use FinePixViewer" in the HELP menu, or "Software Installation" in the Owner's Manual, or visit Fujifilm "Q&A Search" in the following website. ( http://www.fujifilm.com/products/digital/ ) For Macintosh users, refer to "Software Installation" in the Owner's Manual.