User manual FUJIFILM FINEPIX S3100 - Quick Start

S3100/ S3100 Power switch Photography mode Playback mode Power-OFF Shutter button Self-timer lamp Flash Flash control sensor Mode dial Manual Scene position AUTO MOVIE (Video) S3500 Camera Controls d Viewfinder (EVF) c/ EVF/LCD (monitor selector) button Indicator lamp Slot cover LCD monitor xD-Picture Card slot (USB) socket DC IN 5V (Power input) socket Tripod mount Macro button a/T (Tele zoom) button Flash button b /W (Wide zoom) button Strap mount MENU/OK button DISP (Display) / BACK button Low Light Viewfinder button Battery cover Flash pop-up button Strap mount Lens VIDEO OUT (Video output) socket BL00405-100(1) E Picture Taking Refer to Owner's Manual for more detailed instructions A. Loading the batteries 1 0 2 0 3 0 C. Taking pictures 1 2 1. Set the Power switch to "q". 1. Check that the camera is turned off (indicator lamp is off) before opening the battery cover. 2. Load the batteries correctly as shown. 3. Press on the battery cover to push the batteries down. Slide the cover closed. 2. Press the "EVF/LCD" button to alternate the display between the viewfinder (EVF) and the LCD monitor. Press the "EVF/LCD" button to select the viewfinder (EVF). 3 Bebeep 4 Beep B. Setting up the camera 1 Indicator 1 0 2 3. Press the shutter 4. Press the shutter button down fully to take a picture. The camera makes a button down "Beep" sound and takes the picture. halfway to adjust the focus. 2 0 D. Viewing pictures 1 0 1. Align the indicators on the xD-Picture Card slot and xD-Picture Card and then push the card firmly all the way into the slot. Close the slot cover. 2. To turn the camera on, set the Power switch to "q". *A confirmation message appears. Press the "MENU/OK" button to go to DATE/TIME setting screen. 3. You can select your preferred date format. Press "d" or "c" to select the date order, Year, Month, Day, Hour or Minute. Press "a" or "b" to correct the setting. Press the "MENU/OK" button after you complete the setting. *Refer to owner's manual for date/time setup. 1. Set the Power switch to "w". 2. Press "c" to scan forward through your images. Press "d " to scan backwards. 2 0 3 Still images that can be viewed on the FinePix S3100/FinePix S3500 You can use this camera to view still images recorded on the FinePix S3100/FinePix S3500 or still images (excluding some uncompressed images) recorded on a FUJIFILM digital camera that supports xDPicture Card. FGS-406106-Ni Press "d" or "c" to select the date order. Viewing images on your PC A.Install Software B.Connect a Camera to PC C.Save Images A. Install Software Do not connect the camera to your PC until the software installation is completed. 1. Turn your PC on and start up Windows. by using a system administrator account (e.g. "Administrator"). Windows XP q The "Found New Hardware" help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required. w Specify the settings in the "AutoPlay" dialog box. e Select "Viewing images using FinePixViewer" and then select the "Always do the selected action" checkbox. ! Users of Windows 2000 Professional or Windows XP should log in 2. Quit all other active applications until no applications are shown in the taskbar. 3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically. 4. The Setup screen appears. Click the [Installing FinePixViewer] button. r Click the [OK] button to launch FinePixViewer. 5. After installation completed, press [Restart] button. B. Connect the Camera to your PC 1. Load an xD-Picture Card containing photographed images into your camera. 2. Set the "USB MODE" setting in the "SET-UP" menu to digital camera "¶". (Refer to "USING THE SET-UP SCREEN" in the owner's manual.) C. Save Images 1. The Save Image Wizard starts up. Click the [NEXT] button. 2. Check that the files are downloaded from the camera to your PC and that a folder with the date is created. Ex. \My Documents \ My Pictures \ 2004_0723 Image 3. Turn your camera off. 4. If you have one, plug the AC power adapter connector into the "DC IN 5V" socket on the camera and then plug the adapter itself into the main power outlet, otherwise be sure your batteries are fresh and charged. 5. Use the USB cable (included) to connect the camera to your PC. D. View Images 1. Click the [Show List of Images] button. DC IN 5V Camera socket PC 2. Select "Preview" in the View menu to display an enlarged image. USB socket (USB) socket For more information Refer to "How to use FinePixViewer" in the HELP menu, or chapter 5 and 6 in the Owner's Manual, or visit Fujifilm "Q&A Search" in the following website. ( http://home.fujifilm.com/products/digital/ ) For Macintosh users, refer to chapter 5 and 6 in the Owner's Manual. 6. Turn the camera on. 7. Windows 98/98 SE/Me/2000 Professional FinePixViewer starts up automatically.