User manual INFOCUS WORK BIG IN10 - Quick Start

IN10 Quick Start Please read the safety instructions booklet before setting up the projector. 1 Unpack the box Here's what's included: Registration / Reference guide / Online resources Register to activate your warranty to ensure eligibilty for service and support, and get special offers and notifications about free product updates. Inscription / Guide de référence / Ressources en ligne Activez votre garantie pour avoir droit aux réparations et à l'assistance et obtenir les notifications d'offres spéciales et les avis sur les mises à niveau gratuites des produits. Registro / Manual de referencia / Recursos en línea Active la garantía para asegurarse los beneficios del servicio y soporte técnico. Reciba ofertas especiales y notificaciones sobre las actualizaciones gratuitas de nuestros productos. Registrierung /Referenzanleitung / Online-Ressourcen Aktivieren Sie Ihre Garantie, sodass Sie für Service und Unterstützung berechtigt sind. Sie erhalten Sonderangebote und Benachrichtigungen über kostenlose Aktualisierungen. Reference guide languages: Svenska Projector Remote CD-ROM Product Registration, Reference Guide, Web Links Lens Cap Computer Cable Carry Case and Accessory Pouch Power Cord i Save the box and packing materials 2 1 i Put batteries in the remote The remote uses 2 AA batteries 2 + - + 3 Dispose of batteries in an environmentally proper manner Buy a full-featured remote and other custom accessories: www.infocus.com/store Status Indicators Error 4 Power/Standby Green/amber power/standby light: see step Red error light: see Troubleshooting 3 Connect the computer or other source You can connect more than one source at a time Computer Connect to: Computer Computer Cable (included) Got an Apple computer? You may need an adapter. For more information, see How-To Guides at www.infocus.com/support/howto USB USB connection only needed for: Presentation control using projector remote Upgrading projector firmware is optional OR Connect to: DVD or VCR* (using optional cables) 1 Connect video using either an S-Video or a Composite Video cable www.infocus.com/store part no. SP-SVIDEO-10M or SP-CPSTVID-5M Available from A/V dealer or retailer Composite Video Cable Video Cable S- 2 Connect audio using a Mini-Plug to RCA Audio Y-Cable Good OR Better Mini-Plug Audio Y-Cable L R Audio Out Video Out DVD or VCR *Also for game console or cable box. Want better sound? Connect the source's audio output to a receiver/amplifier or home theater system with separate speakers. L Audio In RCA Audio Cable To Projector or R L Home Theater or Receiver R Audio Out DVD or VCR Video Out OR Connect to: Other video sources How-To Guides are available at www.infocus.com/support/howto 4 Turn on the projector 1 2 3 5-10 sec. Plug the power cord into the projector and into an electrical outlet The power light on the projector will light amber. Press the power button The power light will start blinking green. Wait for the lamp to warm up After a few seconds, the power light will stop blinking and stay green . It can take a minute for the lamp to reach full brightness. Warning: Do not look directly into the lens when the projector is turned on. 5 Turn on the computer or other source Got a laptop? You may need to enable its external video port On most laptops, hold down the Fn key and press the function key labeled CRT/LCD, LCD/VGA, , or similar. Apple F7 Dell Fn+F8 Fujitsu Fn+F10 Gateway Fn+F3 or Fn+F4 HP/Compaq Fn+F4 or Fn+F6 Sony Fn+F7 ThinkPad Fn+F7 Toshiba Fn+F5 Key combos for more laptops at www.infocus.com/support 6 Show the picture If the picture isn't visible, keep pressing the source/select button until you see it. Wait a few seconds between each press. i If there's still no picture: Restart your computer. See Troubleshooting for more help. 7 1 Height Adjust the picture Projector Location Release button As distance increases, the image gets larger and moves upwards. Foot 1 Hold down the release button under 2 Lift the front of the projector to the 3 Release the button. desired height. Lens center line the front of the projector. 2 Keystone Diagonal Screen Size 60" / 1.5m 80" / 2m 92" / 2.3m 150" / 3.8m Distance to Screen Minimum 7'2" / 2.2m 9'6" / 2.9m 11'1" / 3.4m Maximum 9'2" / 2.8m 12'5" / 3.8m 14'1" / 4.3m 18'4" / 5.6m 23'3" / 7.1m Press the keystone buttons to make the picture rectangular. 3 Zoom and focus Interactive Screen Size and Distance Calculator www.infocus.com/calculator Buy a Screen and Other Custom Accessories www.infocus.com/store Zoom (rear) Focus (front) Adjust zoom first, then focus the center of the image. Using the menus to make other adjustments 1 Press menu to show menus 2 Press or to choose items (or adjust setting) 3 Press select to confirm menu choice 4 Press menu to hide menus Connect the computer cable (including USB) to your computer (see step 3 ), then press and to move through your presentation. Controlling your presentations 8 Turn off the projector Press the power button twice The first press shows a confirmation message; the second press confirms that you want to power off. The power light on the projector will blink while the fan cools the lamp. If you need to unplug the projector, wait until the fan stops and the power light stops blinking and stays on. Note: While the power light is blinking, button presses on the projector and remote are ignored. 9 1 Register your product Activate your warranty to ensure eligibility for service and support. Get special offers and notifications about free product updates. Write down your projector's serial number It's printed on the label on the back of the projector. You'll need it to register (and if you ever need to contact support). Serial number: 2 Go to www.infocus.com/register 10 Read the Reference Guide Insert the CD-ROM, or go to www.infocus.com/support The Reference Guide is on the CD-ROM in multiple languages. It covers advanced setup and operation, including lamp replacement instructions. The Reference Guide is also available at www.infocus.com/support Troubleshooting No picture, blank picture, or "InFocus" is shown If the power light is off, make sure the power cord is connected and plugged into a live electrical outlet. If the power light is amber and not blinking, press the power button to turn on the projector. Check video source and cables. Make sure the video source (computer, DVD player, VCR, etc.) is turned on and all cables are securely connected. Press the source/select button. You may need to press it several times to view the correct source. Wait a few seconds after each press. Make sure your computer's video port is enabled. Press the key combination that activates your laptop's external video port (see step 5 ). If there is still no image, restart your laptop. Use the Auto Image command. Press menu, press or to highlight Picture, press source/select, press or to highlight Auto Image, press source/select. Press menu again to remove the menu. "Signal out of range" is shown, or picture looks bad Make sure all cables are securely connected between the video source (computer, DVD player, VCR, etc.) and the projector. Use the Auto Image command (see above). If that doesn't help (and the source is a computer), reduce your computer's display resolution or vertical refresh rate. Red light is blinking Note: After blinking 1-5 times, the light turns off for 2 seconds, then the blinking repeats. Lamp won't turn on. Turn the projector off for at least one minute, then turn it on again. If the blinking continues, the lamp may need to be replaced, see below. 2 blinks Remaining lamp life is low. For lamp replacement instructions, see the Reference Guide, which is on the included CD-ROM or can be downloaded at www.infocus.com/support 3 or 4 Unexpected shut down (3 blinks) or fan failure (4 blinks). Turn the projector off blinks for at least one minute, then turn it on again. If the blinking continues, the projector may require service; go to www.infocus.com/support 1 blink 5 blinks The projector is overheating. Turn the projector off and remove anything that may be blocking its air vents. Leave the projector off for at least one minute to let it cool before turning it on again. Important: Continuous operation at high temperature may reduce the lifetime of the lamp and/or projector. More troubleshooting options are in the Reference Guide The Reference Guide is on the included CD-ROM, or download it at www.infocus.com/support Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector. Keep out of the area under and around the projector while it is turned on. See the safety instructions booklet for more details. Questions? We're here to help! Visit us at: www.infocus.com/support We're here to support you with your new purchase. We can help you with... · Determining screen sizes · Documentation in other languages · Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.) · Selecting optional accessories · Product warranty protection plans USA, Canada, Latin America Customer Support Telephone +1 (503) 685-8888 TOLL FREE: 800-799-9911 Mon-Fri, 7 am - 5 pm Pacific techsupport@infocus.com Asia Pacific Customer Support Telephone Singapore: 800-101-1864 China: 800-828-2268 Australia: 1800-630-957 New Zealand: 0800-449-854 Mon-Fri, 9 am - 5 pm SGT asia-support@infocus.com Europe, Middle East, Africa Customer Support Telephone +31 (0)36 539 2820 Mon-Fri, 08:30 - 18:00 CET emea.support@infocus.com Warning: Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USA European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 2004/108/EEC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC, Safety: IEC 60950:2nd Edition/A4:1996 Trademarks Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. InFocus, In Focus, and INFOCUS (stylized), LP, LiteShow, ScreenPlay, LitePort, ASK and Proxima are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user's authority to operate the equipment. EN 55022 Warning This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium. Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Agency Approvals Product Models: LP70+ UL, cUL, TUV Other specific Country Approvals may apply. Please see product certification label. InFocus reserves the right to alter product offerings and specifications at any time without notice.