Setup troubleshooting Symptom The Power light is not lit Diagnosis Is the power cord pushed all the way into the printer? Solution 1 Disconnect the power cord from the wall outlet, and then from the printer. 2 Reconnect the power cord by pushing it all the way into the connector on the printer, and then into the wall outlet. 3 Press Power. Is the printer connected to a working electrical outlet? 1 Connect the printer to an electrical outlet that other electrical devices have been using. 2 Press Power. Memory card is not recognized by the printer Is the memory card damaged? Is the memory card inserted correctly? Is there more than one memory card inserted at the same time. Are you using a supported memory card type? Do you have a PictBridge-enabled digital camera connected to the printer. The control panel displays text in the wrong language Did you select a language? Verify that there is no damage to the memory card. Insert the memory card correctly. For help, see "Inserting memory cards" in the User's Guide. Only one memory card may be used at one time. Remove the second memory card. For supported memory cards, see "Supported memory cards" in the User's Guide. Disconnect the PictBridge-enabled digital camera from the printer. 1 Press Menu. 2 Press the down arrow button until you reach the last item. 3 Press the up arrow button twice. 4 Press + or - to scroll to the language you want. 5 Press Select to save your choice. *20C0070* 310 series Setup Instructions www.lexmark.com Need ink? Questions? · Refer to your User's Guide. · Visit our Web site: http:// support.lexmark.com/. · Call us at 1-800-332-4120. Monday­Friday (9:00 AM­9:00 PM EST) Saturday (Noon­6:00 PM EST) Note: Phone number and support times may change without notice. Record the following information (located on your store receipt and the back of your printer) and have it ready when you contact us so that we may serve you faster: Machine Type number_____________________________ Serial number_____________________________ Date purchased___________________________ Store where purchased___________________________ · 33 · 35 Save this sheet for future reference. PN 20C0070 EC 9J0003 © 2004 Lexmark International, Inc. All rights reserved. Safety information · Use only the power supply provided with this product or the manufacturer's authorized replacement power supply. · Connect the power supply cord to an electrical outlet that is near the product and easily accessible. · Refer service or repairs, other than those described in the user documentation, to a professional service person. CAUTION: Do not set up this product or make any electrical or cabling connections, such as the power supply 1 Unpack the printer Setup booklet User's Guide Index card 2 Prepare the printer 1 Connect the power cord. 3 Load the index card 1 Lift the paper support. 2 Make sure the Power light is on. 2 Load the index card. Color print cartridge Power cord Press + to scroll to your language and then press Select. 4 1 Install the print cartridge Open the access cover. 2 Remove the sticker and tape from the bottom of the print cartridge. Warning: Do not touch the gold contact area on the back or the print cartridge nozzles on the bottom. 3 Open the cartridge lid, insert the cartridge, and snap the cartridge lid closed. 4 Close the access cover. 5 Press Select. You may discard the alignment page after it prints. 5 1 Print your first photo Load a photo card. 2 Insert a memory card with digital photos into the correct slot. The I Want To... menu appears. 3 1 Press + to find the photo you want to print. 2 Press Select to choose the photo. 4 Press Start to print your selected photo. Congratulations! You have successfully completed your first project. ...