User manual MICROTEK SCANMAKER 8700 PRO - Quick Start

How to Install Your Scanner Transparency Accessories How to install the various scanner transparency accessories that come with dual-bed scanners featuring the E.D.I.T technology. Before proceeding any further with installation or use, check first to see that your package includes the following. Using the 8" x 10" Glass Film Holder 1. Place the film on top of the Glass Film Holder. Using the 35mm Mounted Slide Template 1. Insert the individual 35mm slides to be scanned into the 35mm Mounted Slide Template. 8" x 10" Glass Film Holder 2. Place the vinyl strip on the edges outside the film to secure the film to the holder. Main Staging Template 2. Place the 35mm Mounted Slide Template in the Main Staging Template, then put this assembly in the transparency tray of the scanner. 35mm Mounted Slide Template 6 x 9 cm Film Template 35mm Filmstrip Template 3. Place the Glass Film Holder into the transparency tray of the scanner. 4" x 5" Film Template There are two ways to scan transparent film. · By using the 8" x 10" Glass Film Holder, which is used to scan non-standard-sized transparent film. · By using the Main Staging Template, which is used together with the individual templates to scan a particular type of standard-sized transparent film, such as individual 35mm slides, 35mm filmstrips, 6 x 9 cm film, or 4" x 5" film. Copyright © 2000 Microtek International Inc. http://www.microtek.com I49-002882A, June 2000 Using the 35mm Filmstrip Template 1. Push to open the 5-piece 35mm Filmstrip Template. 2. Place the 35mm filmstrip to be scanned in the 35mm Filmstrip Template. 3. Pull to close the 5-piece 35mm Filmstrip Template. b) a) c) Using the 6 x 9 cm Film Template 1. Push to open the 6 x 9 cm Film Template. 2. Place the film to be scanned in the 6 x 9 cm Film Template. 3. Pull to close the template. b) a) c) Using the 4" x 5" Film Template 1. Push to open the 4" x 5" Film Template. 2. Place the films to be scanned in 4" x 5" Film Template. 3. Pull to close the template. b) a) c) 4. Place the 35mm Filmstrip Template in the Main Staging Template, then put this assembly in the transparency tray of the scanner. 4. Place the 6 x 9 cm Film Template in the Main Staging Template, then put this assembly in the transparency tray of the scanner. 4. Place the 4" x 5" Film Template in the Main Staging Template, then put this assembly in the transparency tray of the scanner. Note: When the installation is done, you can refer to a separate printed document (Installing and Getting Started or Step-by-Step Tutorial) included in your scanner package for a more detailed scanning procedures.