User manual NAVMAN X300 - Quick Start

NAVMAN Send completed registration card to us, or register at www.sport-tool.com, to go in the draw to receive a special gift from Navman. Your registration will enable us to optimize our service to you. Product purchased A300 M300 S300 R300 W300 X300 Date of purchase (dd/mm/yy) How will you mainly use your Sport.Tool? Customer information First Name: Last Name: Country: Street 1: Street 2: City: Postal Code: E-mail: (You can choose more than one) Running Biking Mountain Biking Walking Hiking Boating Other Nordic Walking Alpine Skiing Nordic Skiing Snowboarding Windsurfing Expected use I expect to use the Sport.Tool approx days per month. User profile Age: yrs male female Navman product information Please tick here to receive offers and product information from Navman. NAVMAN X300 -- Settings Setting options Press and hold to enter setup Press repeatedly to step through the setting options. ) to start or stop editing Press both buttons together ( a setting option. repeatedly to step through selectable states, or While editing, press or increase/decrease values. Press and hold the appropriate button to increase/decrease values quickly. Set (12hr) lets you set 12hr or 24hr time format Set (31-12) lets you set dd-mm or mm-dd date format Calc up When `calc up' is «ON» the X300 calculates data for all movement (uphill and downhill). When `calc up' is «OFF» the X300 calculates information for downhill movement only. Beep When beep is «ON» a beep will sound when the buttons are pushed. Set units (km/h) lets you set speed units to «km/h» or «mph» Distance and altitude are displayed in units corresponding to the speed units, i.e. if you choose «km/h» for speed units, then distance is displayed in «km» and altitude in «m». Set offset lets you adjust the X300 to display local time The date is displayed to ensure that time adjustments are made in the correct direction, i.e. both correct time and correct date should be displayed. GPS signals must be obtained to set local time. Press and hold to leave setup X300 NAVMAN X300 -- Settings Use the settings settings editing details edit set (12hr) set (12hr) set 12hr set 24hr accept set (31-12) edit set (31-12) set 31-12 set 12-31 accept Calc up edit Calc up Calc up ON Calc up OFF accept beep edit beep beep ON beep OFF accept set units (km/h) edit set units (km/h) set units (km/h) accept set units (mph) set offset edit accept time (date) KEY = press this button = press this button = press both buttons together X300 NAVMAN X300 -- Modes Normal operating modes Press to start normal operation to Press repeatedly to step through the modes (hold cycle automatically through modes). Speed shows session distance and current speed Speed (AVG) shows session distance and average speed Speed (MAX) shows session distance and maximum speed Odometer shows total distance from last odometer reset Altitude shows total accumulated altitude and current altitude Zone OFF lets you skip the zone setting options Zone alerts do not sound if zone status is «OFF». Zone ON makes the min and max zone setting options available If zone status is «ON», alerts sound when zone limits are passed. Zone MIN lets you set your minimum target speed Zone MAX lets you set your maximum target speed Clock shows the current time and date (You may need to adjust the settings to display your local time.) Timer shows session and lap times The timer starts automatically whenever you start moving and stops whenever you stop moving. Timer Recall lets you recall stored lap data. Repeatedly pressing recalls lap data starting from the last stored lap, then lap 1, 2, 3 etc. Press and hold to shut down the X300 X300 NAVMAN X300 -- Modes Use the modes modes Speed operating details store current lap data clear all session data* store current lap data clear all session data* store current lap data clear max speed only store current lap data clear odometer only store current lap data clear accumulated altitude only accept AVG Speed (AVG) MAX Speed (MAX) 2 873 Odometer Altitude edit ZONE SET Zone OFF Zone OFF Zone OFF Zone ON accept Zone ON edit accept edit Zone MIN Zone MIN accept edit Zone MAX Zone MAX Clock Timer store current lap data clear all session data* store current lap data clear all session data* RCL Timer recall recall lap data restart recall from lap 1 (*does not clear odometer) KEY = press this button = press this button = press both buttons together = press and hold both buttons together * X300 X300 QUICK START GUIDE NOW YOU KNOW. X300 Step 1 Get ready Fit the battery ! For best performance: General use = Alkaline Below 5 oC = NiMH 1. Turn D-ring anti-clockwise and slide enclosure cover down to open battery enclosure. 2. Insert battery with «» end as indicated inside enclosure. 3. Replace enclosure cover (ensuring lugs at the bottom of the cover are aligned with slots in the enclosure surround), turn D-ring clockwise to seal. Fit the X300 The X300 is designed to be worn on the left upper arm. You may wish to adjust some of the settings prior to fitting. L Be outdoors The X300 is not intended for operation indoors or under water as it uses Global Positioning System (GPS) satellites to get time and date information, and to calculate distance and speed. For best results, always use the X300 outdoors with an unobstructed view of the sky. X300 Step 2 Get set Know the buttons The control buttons, and (as shown above) are pressed separately or together to turn the unit «ON» and «OFF», cycle through modes, and select mode options. Know the startup options 1. enter setup 2. start normal operation ! Always enter setup first if you wish to change settings. To enter setup after starting normal operation, you must shut down and re-start the X300. Flashing icon = seeking GPS signals Constant icon = GPS signals obtained Startup could take up to 80 seconds to get all satellite data. Enter setup Press and hold to enter setup counter If you release before the counter reaches zero, the X300 will immediately start normal operation. For details about system settings see over page or consult User Guide. Press and hold to leave setup counter After leaving setup, the X300 automatically starts normal operation displaying the speed mode first. X300 Step 3 Go Start normal operation Press to start normal operation When starting directly into normal operation X300 will start in the mode it was in at last shutdown. The X300 automatically operates whenever you are moving and pauses operation while you are stationary. Modes are accessed in the following order: AVG MAX 87 2 3 Speed Timer RCL RCL Speed AVG Timer Speed MAX Clock Odometer Altitude Zone OFF Zone ON Zone MIN ZONE SET Zone MAX For details about modes or setting zone limits, see over page or consult User Guide. Mode example (speed) session distance km current speed km/h speed mode icon Mode icons appear in the lower section of the screen. While in Speed mode you can monitor session distance and current speed. You can also store laps or clear session data. While in Speed mode Press to store lap data Press and hold to clear all* session data Press to go to next mode (*Does not clear odometer) When you want to shut down the X300 Press and hold Now you know. X300 LA000550B © 2005 Navman NZ Ltd. All rights reserved. "Sport.Tool" and "Now you know" are trademarks of Navman NZ Ltd. product and service registration card Navman Europe Customer Registration 4G Gatwick House Peeks Brook Lane, Horley Surrey, RH6 9ST United Kingdom sport·tool sport·tool sport·tool