1 Component and LCD Display QUICK ST ART GUIDE Internal Microphone LED LCD REC ERASE A B/Repeat MODE TIMER SD/MMC Card Slot MENU SPEED External Speaker USB/POWER Terminal Volume HOLD RESET LINE IN Earphone Jack / 2 Charging The Battery 4 Setting Time In order for timer recordings to function properly, the correct time and date MUST be set. Make sure you always have enough battery power. After 1 or 2 hours of the battery being fully discharged the year/day/hour settings are all lost and must be set again. Please fully charge the battery prior to using Radio YourWay LX. The battery can be charged using the AC adaptor, or by making a USB connection with a PC or MAC. It takes approximately 4hrs to fully charge the battery using either method. Press MENU & select SYSTEM using (left/right), next select TIME SET using (up/down) and push / (PLAY). You will now see a similar screen as the one shown below. To Power on the unit, hold the PLAY button for 1-2 seconds. If the HOLD switch is in the ON position, all buttons are disabled and the power on/off function will NOT work. In this case, slide the HOLD switch off. To change the Hour/Minute, use (up/down) To move between the Hr/Min fields, use (left/right). Push / (PLAY) to confirm when you are finished. 3 Using a Memory Card When inserting a memory card in the unit, carefully insert the memory card properly (as shown in the diagram taking note of the correct side up) or you may damage the card and/or Ext card slot. 5 Press Setting Date MENU & select SYSTEM using (left/right),next select CALENDAR using (up/down) and push / (PLAY). You will now see a similar screen as the one shown below. To move between the Year/Month/Date fields, use (up/down). To change the Year/Month/Date, use (left/right). Push / (PLAY) to confirm when you are finished. LINE/MIC You may need to format the memory card to the FAT file system prior to using it. Please refer the user manual for more information. PHONES 6-1 Timer Recording 6-2 Timer Recording You can program the unit to automatically record radio broadcasts via a daily or weekly timer-function; totally unattended. Note: Make sure you select the correct schedule that you want to disable. After selecting the disable option (from a previously saved schedule), press / (PLAY) and then highlight YES using (left/right) and press / (PLAY) again to confirm. This will release the timer slot. The next item is MEMORY. Use (left/right) to select between INTERNAL or EXTERNAL & (down) to move to next item. External Memory option will only be available if there is an external memory card inside the external card slot. The next item is DATE SET use (left/right) to select WEEK or DATE & (down) to move to next item. Date is only used to set a SPECIFIC date in the future for a ONE TIME recording. The most common setting used to record radio shows is WEEK because the unit will turn on EVERY WEEK on that DAY per the setting. 1. Press and hold the TIMER button 2 or 3 seconds to initiate the timer recording screen. You can not set a timer recording when the unit is playing back a file, recording or in the menu mode. You will now see a similar screen as shown below 2.Select a Timer Schedule Slot (1-20) using (left/right). The file recorded by a TIMER RECORDING is saved in its BOX folder (No01 will go in BOX01, No02 in BOX02 etc) File(s) recorded in BOX01-20 are available in VOICE mode only. 3.You will see many items in the timer recording screen. Select different items using (Up/down). The first item is TYPE. Use (down) to highlight TYPE and (left/right) to select between RECORD, PLAY or DISABLE (refer to note on page 6-2 for more disable info) & (down) to move to next item. DISABLE RECORD PLAY Select to Cancel a TIMER-RECORDING & Release the timer slot Start Recording on a set time/ date(Timer-Recording) Play music/radio on a set time/date(Alarm Function) If you select DATE a. Highlight DATE and select Month using (left/right). b. Next move to day field using (down) and select a day of the month using (left/right). c. Once you set the Month and day, use (down) to move to another setting. If you select WEEK (most common setting) a. Highlight DATE and select MON-FRI (for everyday/weekday recording) or M,T,W,TH,F,S,SU (for specific days) using (left/right). b. Once you set the desired day(s) to record, use (down) to move to the next setting. 6-3 Timer Recording 6-4 Timer Recording The next item is SOURCE, Use (left/right) to select between AM, FM, MIC or LINE setting & (down) to move to the next item. The next item will be FREQ if SOURCE is AM/FM and/or BIT RATE if SOURCE is MIC/LINE. Please read chart below for more information. Use SOURCE AM or to select FREQ, press and then to select preset, to finalize The next item is END Use this to set the ENDING TIME of your timer recording. Use (up/down) to select END, (left/right) to change hour (down) to select minute, (left/right) to change minute. 4.Finally press / (play) and use (left/right) to select "YES" and press / (play) again to save and confirm all settings. To view a saved timer, press (don't hold) the timer button one time and use right/left to choose a schedule number to view and up/down to view more setting information. Once a timer is saved, the only way to release the timer slot is to select the schedule (1-20) and choose the disable option (under TYPE) refer to page 6-2 of the quick start guide for more information. Hitting the ERASE KEY will show you a "cancel" message that is not the same as the DISABLE setting. This cancel setting only applies to a non-saved timer and allows you to exit the timer setting quickly. It will not release a previously saved timer. For more information, please refer to the user manual. to select a station and selection. Use SOURCE FM or to select FREQ, press and then to select preset, to finalize to select a station and selection. Record using the microphone (Ext or Int) a certain day/ SOURCE MIC time per WEEK/DATE setting. External Microphone has priority. - Bit rate: 32, 64, 96,128,192 and 256 selectable Record from external device a certain day/time per SOURCE LINE-IN WEEK/DATE setting; even if external device is not connected. Bit rate: 32, 64, 96,128,192 and 256 selectable The next item is Bit Rate Use down to highlight BIT RATE and (left/right) to select between 32, 64, 96,128,192 and 256 & (down) to move to next item. The higher the bit rate the better quality the recording will be. However, the recording will use more memory space. For AM recording, we recommend 32kbps for FM recording 64kbps. The next item is START. Use this to set the STARTING TIME of your timer recording. Use (up/down) to select START, (left/right) to change hour (down) to select minute, (left/right) to change minute & (down) to move last item. Thank you! The Radio YourWay LX Team PoGo! Products, Inc. www.pogoproducts.com ...