User manual SONY PSP - Quick Starting Guide

2-682-258-11(1) Quick Start Guide for PSPTM (PlayStation®Portable) System If you have any further questions related to the use of this product after reading this Quick Start Guide and the Operating Instructions, please contact Sony Customer Information Centre. For more contact information, refer to the EUROPEAN GUARANTEE INFORMATION DOCUMENT or the following web site. LocationFree Support web site http://www.sony.net/Products/LocationFree/support/ LocationFreeTM Player For PSPTM System "SONY" is a registered trademark of Sony Corporation. "LocationFree" is a trademark of Sony Corporation. "PlayStation" is a registered trademark, and "PSP" is a trademark of Sony Computer Entertainment Inc. "Memory Stick Duo" is a trademark of Sony Corporation. All other names of systems, products, and services are trademarks of their respective owners. The symbols for TM and ® for some products are omitted in these instructions. Setup Summary (You need to do this setup before you go out.) STEP 1 ·Check the version of your PSPTM system software. Prepare the PSPTM System ·Connect to your external devices and the Internet, and turn on and the Base Station the Base Station. (See below.) ©2006 Sony Corporation ©2006 Sony Computer Entertainment Inc. Printed in Japan STEP 2 STEP2 Home PSPTM system ·Check the Network Setup for the Base Station. Setup to Watch Video at ·Register your PSPTM system with the Base Station. Home (See the other side.) ·Configure the video settings. On the Go PSPTM system STEP3 STEP 3 Setup to Watch Video On the Go (See the other side.) ·Make easy setup settings for the Base Station with your PSPTM system. STEP1 External device Base Station Router Setup Is Completed Watch video on your PSPTM system at home and on the go. STEP 1 Prepare the PSPTM System and the Base Station Check the version of your PSPTM system software To check the version of your PSPTM system software, select "System Settings" under from the home menu, and then select "System Information". If your system software version is not 2.70 or higher, perform the update. To use this product with your PSPTM system, version 2.70 or higher is required. For details of the system software update, see (http://www.yourpsp.com/). Connect to Your External Devices and the Internet, and Turn On the Base Station 1 Attach the Base Station stand. Holes 2 Connect to external devices (such as DVD players, etc.). 3 Connect the IR Blaster so it faces the remote sensor on the external device. Base Station rear panel 5 Connect the mains lead to the Base Station. AC-LX1B AC power adapter (supplied). TV Stand IR Blaster (supplied) Infrared transmitter Remote sensor "FRONT" mark Claws Mains lead (supplied) or Type BF 4 Scart to A/V cable (supplied) Scart cable (not supplied) A/V cable (RCA pin cable, supplied) Connect the LAN cable (not supplied). For details, see the connection examples in STEP 2. Type C-6 6 Turn on the power. Lights POWER LED External device (STB, PVR, etc.) External device (STB, PVR, etc.) Cable outlet STEP 2 Setup to Watch Video at Home Check the Network Setup for the Base Station Connection to watch video at home to LAN port Connection to watch video away from home To download remote control data or perform a software version update of the Base Station, you must connect the Base Station to the Internet. Modem without router function Modem with internal router to the Internet Base Station Router (UPnP Compatible) to LAN port DSL or cable modem * to the Internet Base Station DSL or cable modem with internal router (UPnP compatible) * * To determine the type of your modem, check with your Internet service provider. Register your PSPTM system with the Base Station 1 2 Turn on the PSPTM system, and then turn on the wireless LAN switch of the PSPTM system. Select under from the home menu. 4 Press the SETUP MODE button on the rear of the Base Station. With the Base Station turned on, press and hold the button until the SETUP MODE LED starts to blink. 6 · If more than 5 minutes pass from when the SETUP MODE LED starts to blink, the LED will go from blinking to fully lit and the Base Station will no longer register the PSPTM system. In this case, press the SETUP MODE button on the rear of the Base Station again and hold the button down until the LED starts to blink. · If a message stating "Base Station update required" is displayed, you must perform a software version update. For details, refer to the Operating Instructions of the LF-PK1. · If you cannot complete the registration of your PSPTM system with the Base Station, update your PSPTM system software. For more details, refer to "Setting and Usage Guide for PSPTM (PlayStation®Portable) System". You can download this guide (PDF file) from the LocationFree Support web site at http://www.sony.net/Products/LocationFree/support/. Connect to the Base Station. Select [LocationFree AP], and then press the button. A connection to the Base Station is established. The setting screen for use of LocationFree Player is displayed. Press the right button to go to the next screen. 7 The video screen is displayed. When a connection to the Base Station is established, the video screen will be displayed. 3 Select [Start], and then press the button. Wait until the registration with the Base Station and network settings for establishing a connection from the PSPTM system with the Base Station are completed. This is an automatic process. 5 Check the setting list. Press the button to finish the settings. A network settings list is displayed. Make sure that the external device is turned on. Otherwise, you may see no picture. Configure the video settings Configure the on-screen remote control for video (For connecting to external devices, as instructed in 3 of STEP 1) You can adjust settings for the on-screen remote control that will be used to operate external devices such as STB or PVR that are connected to the Base Station. To adjust these settings, Memory Stick DuoTM media is required. 4 A message appears indicating that you need to download remote control data. Select [Yes], and then press the button. Follow the on-screen instructions to download remote control data onto Memory Stick DuoTM media. 9 Test the remote control to make sure it works, and then press the right button. By selecting [Power] and then pressing the button, you can turn the external device on and off. In some cases it may take as long as 5 seconds for the external device to turn on after you press the button. Configure the colour system for video (For watching video in PAL, SECAM, PAL60, NTSC, etc.) Press the button during video playback. Select from the LocationFree Player control panel, and then press the button. Select [Advanced Settings], and then press the button. Select [Video Signal Settings], and then press the button. Select a colour system, and then press the button. Select [OK], and then press the button. 5 6 7 8 After downloading, reconnect to the Base Station. Perform Step 1 to 3 again. 1 10 Save your settings. Press the button to save settings on the PSPTM system. 2 3 1 2 3 Press the button during video playback. Select from the LocationFree Player control panel, and then press the button. Select [Remote Control Settings], and then press the button. Select [Video 1] or [Video 2] for the connected external device you want to use the remote control for, and then press the button. Select the manufacturer of the connected external device, and then press the right button. Select the product type of the connected external device, and then press the right button. · Even if the power turns on and off correctly with [Power], other buttons may not be enabled. If this happens, select [Video 1] or [Video 2] from the Index. With the on-screen remote control, confirm that the buttons are enabled. · Try all the models that appear on the screen to select the most suitable on-screen remote control for the connected devices. · The button names or button numbers of the on-screen remote control may differ from those of the remote control supplied with your device. 4 5 To enable the change of the colour system settings, you need to disconnect the NetAV connection once, and then reconnect it. STEP 3 1 2 Setup to Watch Video On the Go Make Easy Setup Settings for the Base Station with Your PSPTM System Check that the Base Station is turned on. Press the button during video playback. Select from the LocationFree Player control panel, and then press the button. Select [Base Station Settings], and then press the button. Select [Enter], and then press the button. 5 Enter the user name and password, select [OK], and then press the button. User name : lfx (lowercase letters) Initial password: WebPassword printed on the sticker of the Base Station. 6 Select [Easy Setup], and then press the button. 7 If [Success] appears in the [NetAV Check] screen, select [Menu], and then press the button. The display will return to the initial screen. Select [Exit Setup], press the button, and then close the Internet browser by pressing the button. Afterwards Use the PSPTM system to watch video. For details on settings and operation of the PSPTM system, refer to "Setting and Usage Guide for PSPTM (PlayStation®Portable) System". You can download this guide (PDF file) from the LocationFree Support web site at http:// www.sony.net/ Products/ LocationFree/support/. z Tip Select [Deutsch], [English] or [Français] to choose your language. z Tip If [Setup Incomplete] appears in the [NetAV Check] screen, select [Details] and press button. Read the explanation on that screen and make the necessary settings. 3 4 Follow the on-screen instructions to proceed to the NetAV check. In the [NetAV Setup] page, read the supplied Dynamic DNS Terms-of-Use Agreement, select the radio button, [NEXT], and then press the button.