MCM704D Quick start guide What's in the Box? You should find these items upon opening the box. Pull out the plastic protective sheet before use. FM antenna AM antenna Docking cable Remote Control Quic k St 1 art Guid e Use r 2 Ma nua l 1 X Docking cradle 8 X iPod dock adaptors User Manual Quick Start Guide Control cable 1 Connect the speaker cables. 4 Connect the docking cradle. 2 Connect the FM and AM antennas. 5 Connect the power cord of the system. 3 Connect the control cable. FM antenna AM antenna 2 Speaker (right) Speaker (left) 3 1 Tip 5 AC power cord See the User Manual for how to connect other equipment to this system. iPod portable player Docking cradle 4 Docking cable Setting the clock IMPORTANT! ­ To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON 2 on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOL+/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL+/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Playing a disc 1 Press SOURCE on the top of the system to select DISC or press CD on the remote. 2 Press ç to open the CD compartment. 3 Insert a disc with the printed side facing up. Press ç again to close the compartment. 4 Playback will start automatically. 5 To stop playback, press 9 . Playing a USB mass storage device With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1), USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to work with this Hi-Fi system). 1 2 Insert the USB device's USB plug into the socket on the set. Press SOURCE once or more (or USB on the remote control) to select USB. 3 Play the USB's audio files as you do with the albums/tracks on a CD. Playing Apple iPod using MCM704D 1 Select the correct dock adaptor, as indicated on each adaptor, then fit it in the dock. 2 Correctly place the compatible iPod player into the dock. 3 Press SOURCE on the system repeatedly or iPod on the remote control to select the iPod source. 4 Power on your iPod player. 5 Select and play your favourite songs stored in the iPod player. Tip Detailed playback features and additional functions are described in the accompany owner's manual. PDCC-JS/JW-0714 ...