Technical Reference August 2004 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2004 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550 Edition: August 2004 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call +44 (0)8704 440 044. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. Lexmark, Lexmark with diamond design, MarkNet, MarkVision, and Optra are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. ColorGrade, PerfectFinish, and PictureGrade are trademarks of Lexmark International, Inc. The following terms are trademarks or registered trademarks of other companies: Albertus Antique Olive Apple-Chancery Arial Candid CG Omega CG Times The Monotype Corporation plc Monsieur Marcel OLIVE Apple Computer, Inc. The Monotype Corporation plc Agfa Corporation Product of Agfa Corporation Based on Times New Roman under license from The Monotype Corporation plc, is a product of Agfa Corporation Chicago Apple Computer, Inc. Clarendon Linotype-Hell AG and/or its subsidiaries Eurostile Nebiolo Geneva Apple Computer, Inc. GillSans The Monotype Corporation plc Helvetica Linotype-Hell AG and/or its subsidiaries Hoefler Jonathan Hoefler Type Foundry ITC Avant Garde Gothic International Typeface Corporation ITC Bookman ITC Lubalin Graph ITC Mona Lisa ITC Zapf Chancery Joanna MT Marigold Monaco New York Oxford Palatino Stempel Garamond Taffy Times New Roman TrueType Univers Wingdings International Typeface Corporation International Typeface Corporation International Typeface Corporation International Typeface Corporation The Monotype Corporation plc Arthur Baker Apple Computer, Inc. Apple Computer, Inc. Arthur Baker Linotype-Hell AG and/or its subsidiaries Linotype-Hell AG and/or its subsidiaries Agfa Corporation The Monotype Corporation plc Apple Computer, Inc. Linotype-Hell AG and/or its subsidiaries Microsoft Corporation AppleTalk, EtherTalk, LocalTalk, and Macintosh are trademarks of Apple Computer, Inc., registered in the United States and other countries. PCL® is a registered trademark of the Hewlett-Packard Company. PCL 3, PCL 5, and PCL 6 are Hewlett-Packard Company's designations of a set of printer commands (language) and functions included in its printer products. These printers are intended to be compatible with the PCL 3, PCL 5, and PCL 6 languages. This means these printers recognize PCL 3, PCL 5, and PCL 6 commands used in various application programs, and that the printer emulates the functions corresponding to the commands. PostScript® is a registered trademark of Adobe Systems Incorporated. PostScript is Adobe Systems' designation of a set of printer commands (language) and functions included in its software products. These printers are intended to be compatible with the PostScript language. This means these printers recognize PostScript commands used in various application programs, and that the printer emulates the functions corresponding to the commands. Other trademarks are the property of their respective owners. Safety Information · If your product is not marked with this symbol , it must be connected to an electrical outlet that is properly grounded. CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power cord or telephone, during a lightning storm. · The power cord must be connected to an electrical outlet that is near the product and easily accessible. · Refer to the Setup Guide for additional safety information, and for setting up the equipment. · Refer service or repairs, other than those described in the operating instructions, to a professional service person. © 1998, 2004 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense. TOC-1 Contents Contents Introduction ......................................................................1-1 Overview............................................................................................................. 1-1 Navigational Tips ................................................................................................ 1-4 Printing the File................................................................................................... 1-4 Bibliography........................................................................................................ 1-5 PCL Emulation..................................................................2-1 Selecting PCL Emulation....................................................................................2-1 Using SmartSwitch........................................................................................ 2-1 Using the Operator Panel or MarkVision Professional.................................. 2-1 Using Your Software Program ......................................................................2-2 Page Formatting ................................................................................................. 2-3 Printable Areas.............................................................................................. 2-3 Lexmark C510(n) .......................................................................................... 2-4 Lexmark X422 ............................................................................................... 2-5 Lexmark E230, E232, E234(n), E330, E332n ...............................................2-6 Print Area Menu Item.......................................................................................... 2-7 Font and Symbol Set Support for the Lexmark X422 ......................................... 2-9 Forward and Backward Compatibility Modes for the Lexmark X422 .......... 2-10 Selecting Symbol Sets for the Lexmark X422.............................................2-15 Font and Symbol Set Support for the Lexmark C510(n) .................................. 2-19 Forward and Backward Compatibility Modes for the Lexmark C510(n)...... 2-20 Selecting Symbol Sets for the Lexmark C510(n) ........................................2-25 Font and Symbol Set Support for the Lexmark E230, E232............................. 2-29 Forward and Backward Compatibility Modes for the Lexmark E230, E232 2-30 Selecting Symbol Sets for Lexmark E230, E232 ........................................2-32 Font and Symbol Set Support for the Lexmark E234(n), E330, E332n............2-37 Forward and Backward Compatibility Modes for the Lexmark E234(n), E330, and E332n.......................................................................................................... 2-38 Selecting Symbol Sets for the Lexmark E234(n), E330, and E332n........... 2-43 Command Structure ......................................................................................... 2-59 Control Codes ............................................................................................. 2-59 Commands.................................................................................................. 2-59 TOC-2 Contents PCL Emulation Commands .............................................................................. 2-62 PCL Emulation Commands by Function ..................................................... 2-62 GL/2 Commands .............................................................................................. 2-84 Raster Image Graphics..................................................................................... 2-88 Raster Compression Mode .........................................................................2-88 Macros..............................................................................................................2-95 Printer Job Language ......................................................3-1 PJL Command Notation ..................................................................................... 3-1 Kernel Commands.............................................................................................. 3-2 Job Separation Commands ................................................................................ 3-4 Environment Commands and Variables .............................................................3-7 Status Readback Commands........................................................................... 3-54 Status Message Format ................................................................................... 3-61 Information Messages................................................................................. 3-61 Auto-Continuable Conditions ...................................................................... 3-63 Attendance Conditions ................................................................................ 3-67 Operator Intervention - Paper Handling ......................................................3-72 Operator Intervention - Paper Jams............................................................ 3-75 Service Errors ............................................................................................. 3-80 Device Attendance Commands ........................................................................ 3-80 Unique PJL Commands.................................................................................... 3-82 File Commands for Flash or Disk................................................................ 3-86 File and Device Protection Commands ............................................................ 3-93 Protecting a File or Device .......................................................................... 3-93 Unlocking a Protected File or Device .......................................................... 3-95 Re-Locking a Protected File or Device........................................................ 3-96 Unlocking a Protected File or Device for the Current Job ........................... 3-97 Recovering Lost Passwords........................................................................ 3-98 PostScript Emulation .......................................................4-1 Selecting PostScript Emulation .......................................................................... 4-1 Using SmartSwitch........................................................................................ 4-1 Using the Operator Panel or MarkVision Professional.................................. 4-1 Using Your Software Program ......................................................................4-2 Page Formatting ................................................................................................. 4-3 TOC-3 Contents Printable Areas.............................................................................................. 4-3 Logical Page Size ..................... ...