User manual MARANTZ SR5500 - Reference Guide

Partner: Marantz Model: SR5500 Device Type: Receiver/Processor GENERAL INFORMATION SIMPLWINDOWS NAME: CATEGORY: VERSION: SUMMARY: GENERAL NOTES: Marantz SR5500 Receiver/Processor 1.0 This module controls the Marantz SR5500. This module provides controls for both zones of the SR5500. IT also provides true feedback. NOTE: IN THE PREFERENCES MENU, YOU MUST SET THE STBY MODE TO NORMAL. IF YOU DO NOT CHANGE THIS SETTING, YOU WILL NOT BE ABLE TO TURN THE RECEIVER ON VIA RS232. CRESTRON HARDWARE REQUIRED: SETUP OF CRESTRON HARDWARE: CNXCOM, C2-COM, ST-COM RS232 Baud: 9600 Parity: None Data Bits: 8 Stop Bits: 1 VENDOR FIRMWARE: VENDOR SETUP: None IN THE PREFERENCES MENU, YOU MUST SET THE STBY MODE TO NORMAL. IF YOU DO NOT CHANGE THIS SETTING, YOU WILL NOT BE ABLE TO TURN THE RECEIVER ON VIA RS232. CNSP-123 CABLE DIAGRAM: Partner: Marantz Model: SR5500 Device Type: Receiver/Processor CONTROL: power_on/off/toggle source_* source_m_ch_on/off input_ana/digi_digital_auto input_analog/digital_fixed Volume_Up/Down Volume_Mute_On/Off/Toggle D D D D D D Pulse to turn the main zone on or off. Pulse to select the input. Pulse to turn the multi-channel input on or off. Pulse to set the input signal type to digital auto, digital fixed or analog. Press and hold to adjust the volume up or down. Pulse to turn the volume mute on or off. Analog value for volume presets. Valid values are ­72d to 18d. This should be driven from an Analog Initialize. IT SHOULD NOT BE DRIVEN FROM A SLIDER. Pulse to send the volume level set by the volume_value input. Pulse to turn the attenuator on and off. This is for analog audio signals only. Press and hold to adjust the bass. Press and hold to adjust the treble. Pulse to turn the video mute on and off. Pulse to select the information you want displayed on the front of the receiver. Pulse to select the sleep time or turn the sleep timer off. Toggle will step through the sleep times. Pulse to turn the night mode on and off. This is for digital signals only. Pulse to turn the home theater EQ on and off. Pulse to use the set up menus. Pulse to activate the simple set up function. Pulse to select the surround mode. Pulse to set the test ones for speaker set up. volume_value(-72d_to_18d) A Volume_value_set Attenuator_on/off/toggle Bass_up/down Treble_up/down Video_mute_on/off/toggle Display_* D D D D D D Sleep_* D Night_mode_on/off/toggle Theater-EQ_on/off/toggle Menu_* Simple_Setup_* Surround_* Test_tone_* D D D D D D Partner: Marantz Model: SR5500 Device Type: Receiver/Processor Lip_Sync Tuner_mode_* Tuner_freq_up/down Tuner_auto_up/down/stop Tuner_preset_up/down Tuner_preset_scan_start/stop Tuner_rds_disp/pty D D D D D D D Pulse to activate the lip sync functions. Pulse to set the tuner mode to stereo auto or mono. Press and hold to adjust the tuner frequency. Pulse to start and stop the auto frequency search feature. Pulse to step through the tuner presets. Pulse to start and stop the preset scan feature. Pulse to adjust the tuner rds function. Pulse to enter a frequency or preset number. This keypad will be used for both the main and multi room frequency and preset entry. Pulse to set the preset or frequency entered using the key_* inputs. Pulse to turn the multi room power on and off. Pulse to select the multi room input. Press and hold to adjust the multi room volume. Pulse to turn the multi room volume mute on and off. Press and hold to adjust the tuner frequency. Pulse to start and stop the auto frequency search feature. Pulse to step through the tuner presets. Pulse to start and stop the preset scan feature. Pulse to set the preset or frequency entered using the key_* inputs. Pulse to turn the multi room speaker on and off. This is only available if the surround back left and right speakers are not being used for the main room. Press and hold to adjust the volume for the multi room speakers. This is only available if the surround back left and right speakers are not being used for the main room. Pulse to turn the multi room speaker volume mute on and off. This is only available if the surround back left and right speakers are not being used for the main room. Key_* Tuner_preset_num_call Tuner freq_num_direct_set MR_Power_On/Off/Toggle MR_source_* MR_Volume_Up/Down MR_Volume_Mute_On/Off/Toggle MR_Tuner_Frequency_Up/down MR_Tuner_Auto_Tune_Up/Down/stop MR_tuner_preset_up/down MR_tuner_preset_scan_start/stop MR_tuner_preset_num_call MR_tuner_freq_num_direct_set MS_power_* D D D D D D D D D D D D Ms_volume_up/down D Ms_volume_mute_on/off/toggle D Partner: Marantz Model: SR5500 Device Type: Receiver/Processor Auto_status_on/off Rx$ D S Pulse to turn the auto feedback feature on and off. Serial signal to be routed from a 2-way serial com port. FEEDBACK: Power_On/Off_Fb Video_source_*_fb Audio_source_*_fb Audio_source_m_ch_fb D D D D High to indicate the current power state. High to indicate the currently selected video input. High to indicate the currently selected audio input. High to indicate that the multi-channel input is on. High to indicate the current input signal type. Analog signal indicating the current volume level. To be displayed using a bar graph on a touch panel. Serial signal indicating the current volume level. High to indicate the current volume mute state. High to indicate the current state of the attenuator. Analog signal indicating the current bass setting. To be displayed using a bar graph on a touch panel. Serial signal indicating the current bass level. Analog signal indicating the current treble setting. To be displayed using a bar graph on a touch panel. Serial signal indicating the current treble level. High to indicate the current state of the video mute. High to indicate the current state of the front panel display. High to indicate that the sleep mode is off. Analog signal indicating the current time remaining before the SR5500 will shut off. To be displayed using a bar graph on a touch panel. Input_analog/digital_autoselected/fixed_Fb D Volume_Bar A Volume$ Volume_Mute_On/Off_Fb Attenuator_On/Off_Fb S D D Bass_bar A Bass$ S Treble_bar A Treble$ Video_mute_on/off_fb Display_*_fb Sleep_off_fb S D D D Sleep_timer_bar A Partner: Marantz Model: SR5500 Device Type: Receiver/Processor Sleep S Serial signal indicating the current time remaining before the SR5500 will shut off. High to indicate the current night mode state. High to indicate the current theater-EQ state. High to indicate the current menu state. High to indicate the current state of the Simple Set up function. High to indicate the currently selected surround mode. High to indicate the current state of the test tone. High to indicate the current test tone mode. High to indicate which channel is receiving the test tone. High to indicate that the lip sync function is off. Analog value indicating the current tone level for the channel. Serial signal indicating the current tone level for the channel. High to indicate the current setting of the tuner signal. Analog value indicating the current station value. To be displayed using a digital gauge. Analog value indicating the currently selected preset number. To be displayed using a digital gauge. Analog value indicating the value being entered using the Key_* inputs. This is the number that will be sent to the SR5500 when one of the preset_call or freq_num_direct inputs is pulsed. High to indicate the current multi room power state. High to indicate the currently selected video input for the multi room. High to indicate the currently selected audio input for the multi room. Analog signal indicating the current volume for the multi room output. Night_mode_On/Off_Fb Theater-EQ_on/off_fb Menu_on/off_fb Simple_setup_On/Off_Fb Surround_*_fb Test_tone_on/off_fb Test_tone_auto/manual_mode_fb Test_tone_ch_*_fb Lip_Sync_Off_Fb *_bar *$ Tuner_auto_stereo/mono_fb D D D D D D D D D A S D Tuner_frequency_fm/am_ana A Tuner_preset_number_ana A Tuner_key_num_ana A MR_Power_On/Off_Fb MR_video_Input_*_Fb MR_audio_Input_*_Fb MR_Volume_Bar D D D A Partner: Marantz Model: SR5500 Device Type: Receiver/Processor Mr_volume$ MR_Volume_Mute_On/Off_Fb MR_tuner_mode_auto_stereo/mono_fb S D D Serial signal indicating the current volume level for the multi room output. High to indicate the current multi room volume mute state. High to indicate the current setting of the tuner signal. Analog value indicating the current station value. To be displayed using a digital gauge. Analog signal indicating the current tuner preset. To be displayed using a digital gauge on a touch panel. High to indicate the current state of the multi room speaker output. Analog value indicating the current value of the multi room speaker volume. Serial signal indicating the current value of the multi room speaker volume. High to indicate the current state of the multi room speaker volume mute. High to indicate the current state of the auto feedback setting. High to indicate the audio signal type for the currently selected input. High to indicate the sampling rate for the currently selected input. High to indicate which speakers are currently active in the main room. Serial signal to be routed to a 2-way serial com port. MR_Tuner_Frequency_fm/am_Ana A MR_Tuner_Preset_Ana A Ms_power_*_fb Ms_volume_bar Ms_volume$ Ms_volume_mute_on/off_fb Auto_status_on/off_fb Signal_*_fb Sampling_*_fb Ch_status_*_fb Tx$ D A S D D D D D S TESTING: OPS USED FOR TESTING: PRO2: 3.137 CNMSX-Pro: 5.14.02x 2.05.22 Marantz SR5500 Demo V. 1.0 COMPILER USED FOR TESTING: SAMPLE PROGRAM: REVISION HISTORY: