User manual MARANTZ SR9600 - Reference Guide

Partner: Marantz Model: SR9600 Device Type: Surround Receiver GENERAL INFORMATION SIMPLWINDOWS NAME: CATEGORY: VERSION: SUMMARY: GENERAL NOTES: Marantz SR9600 Receiver/Processor V1.0 This module controls and provides true feedback for the Marantz SR9600. This module provides control for both zones on the SR9600. It also provides true feedback. NOTE: IN THE PREFERENCES MENU, YOU MUST SET THE STBY MODE TO NORMAL. IF YOU DO NOT CHANGE THIS SETTING, YOU WILL NOT BE ABLE TO TURN THE RECEIVER ON VIA RS232. NOTE: THIS MODULE IS FOR 2 SERIES PROCESSORS ONLY. CRESTRON HARDWARE REQUIRED: SETUP OF CRESTRON HARDWARE: C2COM, ST-COM RS232 Baud: 9600 Parity: None Data Bits: 8 Stop Bits: 1 VENDOR FIRMWARE: VENDOR SETUP: None IN THE PREFERENCES MENU, YOU MUST SET THE STBY MODE TO NORMAL. IF YOU DO NOT CHANGE THIS SETTING, YOU WILL NOT BE ABLE TO TURN THE RECEIVER ON VIA RS232. CNSP-123 CABLE DIAGRAM: Partner: Marantz Model: SR9600 Device Type: Surround Receiver CONTROL: RX$ power_on/off/toggle input_* input_mode_cyclic/auto input_*_fixed volume_up/down audio_mute_on/off/toggle volume_value(-80d_to18d) S D D D D D D A Serial signal to be routed from a 2-way serial com port. Pulse to turn the receiver on and off. Pulse to select the input. Pulse to set the input mode. Pulse to set the input type to digital fixed or analog fixed. Press and hold to adjust the volume. Pulse to turn the volume mute on and off. Analog signal to allow for direct volume level setting. Pulse to set the volume to the level value on volume_value(-80d_to_18d) immediately. Pulse to set the volume to the level value on volume_value(-80d_to_18d) gradually. Pulse to turn the attenuator on and off. Pulse to adjust the bass or treble. Pulse to turn the video mute on and off. Pulse to set the receiver's front panel to input, surround, auto off, or off. volume_set_direct D volume_set_gradual D attenuator_on/off/toggle bass/treble_up/down video_mute_on/off/toggle display_cyclic/input/level/auto_off/off D D D D Partner: Marantz Model: SR9600 Device Type: Surround Receiver speaker_*_on/off/toggle sleep_timer_off sleep_timer_*min sleep_set_cyclic osd_on/off/toggle night_mode_on/off/toggle DC_trig1/2/3/4_on/off re-EQ_on/off/toggle bilingual_main/sub/main+sub/cyclic setup_menu_on/off/toggle menu_cursor_enter/up/down/left/right surr._mode_change_next/prev surr._* surr._THX_on/off/toggle dolby_HP_change dolby_HP_* test_tone_on/off/toggle test_tone_channel_next/prev channel_select_disp._on/off/toggle lip_sync_off lip_sync_up/down tuner*_mode_auto_stereo/mono/toggle D D D D D D D D D D D D D D D D D D D D D D Pulse to turn speaker a or b on and off. Pulse to turn the sleep timer off. Pulse to set the sleep timer for the desired number of minutes. Pulse to cycle the sleep timer. Pulse to turn the on screen display on and off. Pulse to turn the night mode on and off. Pulse to turn the DC trigger 1, 2, 3 or 4 on and off. Pulse to turn the re-EQ on and off. Pulse to set the bilingual mode. Pulse to turn the set up menu on and off. Pulse to control the cursor. Pulse to go the next or previous surround mode. Pulse to select the surround mode. Pulse to turn the THX mode on and off. Pulse to select the Dolby headphone mode. Pulse to directly select the Dolby headphone mode. Pulse to turn the test tone mode on and off. Pulse to change the test tone oscillation channel. Pulse to turn the channel select display on and off. Pulse to turn the lip sync adjustment off. Pulse to adjust the lip sync delay by 10 msec. Pulse to set the FM tuner to auto stereo or mono. Partner: Marantz Model: SR9600 Device Type: Surround Receiver tuner*_freq_up/down tuner*_auto_* tuner*_preset_up/down tuner*_preset_scan_start/stop D D D D Press and hold to adjust the tuner frequency. Pulse to start and stop the tuner auto tune function. Pulse to step to the next or previous tuner preset. Pulse to start and stop the tuner preset scan function. Pulse to enter either the tuner frequency or tuner preset number. You must pulse the tuner_freq_num_direct_set input or the tuner_preset_num_call input. Pulse to select the preset number entered using the tuner_key* inputs. Pulse to select the tuner frequency entered using the tuner_key* inputs. Pulse to turn the rds on and off. Only available on European models. Pulse to turn the rds pty function on and off. Only available on European models. Pulse to turn the mutli-room power on and off. Pulse to turn the multi-room speaker on and off. Pulse to select the multi-room input. Press and hold to adjust the multi-room volume. Pulse to turn the multi-room volume mute on and off. Pulse to turn the multi-room on screen display on and off. Pulse to turn the multi-room sleep timer off. Pulse to set the multi-room sleep timer for the desired number of minutes. Pulse to cycle the sleep timer. Pulse to set the multi-room FM tuner to auto stereo or mono. Press and hold to adjust the multi-room tuner. Pulse to start and stop the tuner auto tune function. Pulse to step to the next or previous preset. tuner*_key* D tuner*_preset_num_call tuner*_freq_num_direct_set tuner*_rds_disp(only_EU_Ver.) tuner*_rds_pty(only_EU_Ver.) mr*_power_on/off_toggle ms*_power_on/off/toggle mr*_input_* mr*_volume_up/down mr*_audio_mute_on/off/toggle mr*_osd_on/off mr*_sleep_timer_off mr*_sleep_timer_*min mr*_sleep_set_cyclic D D D D D D D D D D D D D mr*_tuner*_mode_auto_stereo/mono/toggle D mr*_tuner*_freq_up/down mr*_tuner*_auto_* mr*_tuner*_preset_up/down D D D Partner: Marantz Model: SR9600 Device Type: Surround Receiver mr*_tuner*_preset_scan_start/stop mr*_tuner*_preset_num_call mr*_tuner*_freq_num_direct_set auto_status_on/off D D D D Pulse to start and stop the preset scan function. Pulse to call the tuner preset number. Pulse to directly set the tuner frequency. Pulse to turn the auto status function on and off. FEEDBACK: TX$ power_on/off_fb video_input_*_fb audio_input_*_fb S D D D Serial signal to be routed to a 2-way serial com port. High to indicate the current power state for the main zone. High to indicate the currently selected video input. High to indicate the currently selected audio input. High to indicate the currently auto selected input type. High to indicate the currently manually selected input type. Analog value indicating the current volume level. To be displayed using a bar graph on a touch panel. Serial signal indicating the current volume level in dB. This is the same as the front panel of the receiver. High to indicate the current state of the volume mute. High to indicate the current state of the attenuator function. Analog values indicating the current bass or treble level. To be displayed using bar graphs on a touch panel. Serial signal indicating the current bass and treble level. This is the same as the front panel of the receiver. High to indicate the current state of the video mute. High to indicate the currently selected front panel display mode. High to indicate the current state for speakers a and b. input_mode_analog/digital_autoselected_fb D input_analog/digital_fixed_fb D volume_bar A volume$ S audio_mute_on/off_fb attenuator_on/off_fb D D bass/treble_bar A bass/treble$ S video_mute_on/off_fb display_input/level/auto_off/off_fb speaker_*_on/off_fb D D D Partner: Marantz Model: SR9600 Device Type: Surround Receiver sleep_timer_off_fb D High to indicate that the sleep timer is off. Analog value indicating the time remaining before the sleep mode will turn the receiver off. To be displayed using a bar graph on a touch panel. Serial signal indicating the sleep time remaining. High to indicate the current state of the on screen display. High to indicate the current state of the night mode. High to indicate the current state of the DC triggers 1, 2, 3 & 4. High to indicate the current state of the re-EQ. High to indicate the current state of the bilingual function. High to indicate the current state of the setup menu. High to indicate the currently selected surround mode. High to indicate the currently active headphone mode. High to indicate the current state of the test tone. High to indicate the current test tone mode. High to indicate the current channel of test tone. High to indicate the current state of the channel select display. High to indicate that the lip sync function is currently off. Analog value indicating the current lip sync delay. To be displayed using a bar graph on a touch panel. Serial signal indicating the current lip sync delay. High to indicate the current stereo/mono mode of the tuner. Analog value indicating the currently tuned FM channel. To be display using a digital gauge in the format XXX.XX. Analog value indicating the currently tunes AM channel. To be displayed using a digital gauge in the format XXXX. sleep_timer_bar A sleep$ osd_on/off_fb night_mode_on/off_fb DC_trig1/2/3/4_on/off_fb re-EQ_on/off_fb bilingual_main/sub/main+sub_fb setup_menu_on/off_fb surr._*_fb dolby_HP_*_fb test_tone_on/off_fb test_tone_auto/manual_mode_fb test_tone_ch_*_fb channel_select_disp._on/off_fb lip_sync_off_fb S D D D D D D D D D D D D D lip_sync_bar A lip_sync$ tuner*_stereo/mono_fb S D tuner*_frequency_fm A tuner*_frequency_am A Partner: Marantz Model: SR9600 Device Type: Surround Receiver tuner*_freq.$ tuner*_preset_number tuner*_keyin_value mr*_power_on/off_fb ms*_power_on/off_fb mr*_video_input_*_fb mr*_audio_input_*_fb S A A D D D D Serial signal indicating the current tuner frequency. Analog value indicating the currently selected tuner preset number. Analog value indicating the current value entered using the tuner_key* inputs. High to indicate the current power state of the multi-room zone. High to indicate the current power state of the multi-room speaker. High to indicate the currently selected video input for the multi-room zone. High to indicate the currently selected audio input for the multi-room zone. Analog value indicating the current volume level for the multi-room zone. To be displayed using a bar graph on a touch panel. Serial signal indicating the current volume level for the multi-room zone. This is the same as on the front panel of the receiver. High to indicate the current state of the multi-room volume mute. High to indicate whether the multi-room volume is variable or fixed. High to indicate the current state of the multi-room zone on screen display. High to indicate that the multi-room sleep timer is off. Analog value indicating the time remaining before the sleep mode will turn the multi-room zone off. To be displayed using a bar graph on a touch panel. Serial signal indicating the sleep time remaining for the multi-room zone. High to indicate the current multi-room tuner stereo/mono mode. Analog value indicating the currently tuned FM channel for the multi-room tuner. To be display using a digital gauge in the format XXX.XX. Analog value indicating the currently tunes AM channel for the multi-room tuner. To be displayed using a digital gauge in the format XXXX. Serial signal indicating the current tuner frequency. Analog value indicating the currently selected tuner preset number for the multiroom tuner. mr*_volume_bar A mr*_volume$ S mr*_audio_mute_on/off_fb mr*_volume_variable/fixed_fb mr*_osd_on/off_fb mr*_sleep_timer_off_fb D D D D mr*_sleep_timer_bar A mr*_sleep$ mr*_tuner*_stereo/mono_fb S D mr*_tuner*_frequency_fm A mr*_tuner*_frequency_am A mr*_tuner*_freq.$ S mr*_tuner*_preset_number A Partner: Marantz Model: SR9600 Device Type: Surround Receiver tuner*_busy__fb auto_status_on/off_fb signal_*_fb sampling_*_fb ch_status_*_fb D D D D D High to indicate that the selected tuner is busy. High to indicate the current state of the auto status function. High to indicate the type of digital audio signal received. High to indicate the sampling rate of the received digital signal. High to indicate the active channels for the received digital signal. TESTING: OPS USED FOR TESTING: COMPILER USED FOR TESTING: SAMPLE PROGRAM: REVISION HISTORY: PRO2: 3.137 2.06.20 Marantz SR9600 Demo PRO2 V. 1.0