User manual KODAK 5500 ALL-IN-ONE PRINTER - SETUP POSTER

Start Here EasyShare 5500 All-in-One Printer Print Copy Scan Fax Unpack Printer IMPORTANT: Do not connect the USB cable to the printer until instructed during software installation. 3) Push the photo tray in until it clicks into place. OK 7 d) Carefully remove and discard the black plastic shield and the orange protective cap. d) Press down on the ink cartridge until you hear it click into position. Blac k In k Ca rtr idge Connect Fax Line Use the instructions in this section to connect the fax feature of your printer. More setup configurations can be found in the User's Guide. 10 10 a) See box flaps for unpacking instructions. NOTE: You can only print to the photo tray when the photo tray is pushed in. SEPARATE FAX LINE: Connect your printer to the phone line as shown in the illustration if you have a separate fax line on which you receive no voice calls, and you have no other equipment connected on this phone line. 1-LINE 2-EXT IMPORTANT: Do not touch the copper-colored contacts. b) Remove all orange shipping tape from the printer. 4) Lower the photo tray lid. b) Load plain white paper into the main tray. EasyShare 5500 1 OK Install Control Panel EasyShare 5500 syShare 5500 All-in-One OK All-in-One Printer e) Place the printhead into the carriage. Insert at the angle shown. OK e) Open and uncap the color ink cartridge. Insert it into the printhead. 10 a rt ri d g e 10 Printer All-in-One Printer a) If not preinstalled, insert the control panel overlay, top end first. 1 4 On/Off Phonebook C o lo r In k C Bla ck k In Ca ge rid rt a) Connect a phone cord to your telephone wall jack and the port labeled 1-LINE. 2 5 abc 3 6 def EasyShare 5500 Attention Cancel 7 ghi 8 jkl 9 mno Copy Rotate OK 1) 2) b) Set your Ring to Answer setting by following the steps below. f) Press down firmly on the ink cartridge until you hear it click into position. 1) Press Menu and select Fax Settings. 10 C olo r In k C art ri dg e * pqrs 0 tuv Start Fax Menu # wxyz Photo Zoom All-in-One Printer Box Contents On/Off Attention Phonebook abc def Cancel Symbols Space Scan Transfer EasyShare 5500 EasyShare 5500 Copy ghi jkl mno Rotate Start Fax Menu All-in-One OK Printer All-in-One OK Printer pqrs Photo Zoom tuv wxyz 2) Press the 3) Use the to scroll down to Rings to Answer. or keys to select a number. Bla Symbols Space Scan ck Transfer In k Ca rt rid ge 10 Control Panel Overlay (may be pre-installed) Two-Sided Printing Accessory Sample Photo Paper b) Press down on all edges of the overlay until it snaps into position. On/Off Phonebook 1 4 ghi Attention Cancel 2 abc 3 def EasyShare 5500 5 jkl Copy Rotate 6 mno Start Fax Menu 7 pqrs 8 tuv 9 wxyz Photo Zoom OK Symbols * 0 # Space Scan Transfer All-in-One Printer 3) 4) f) Push firmly against the back wall of the printhead until it clicks into place. It is normal for the printhead to flex when inserting the cartridge. You will not damage the printer. When the phone rings, your printer will answer automatically after the number of rings you set in the Ring to Answer setting. It will then send fax reception tones to the sending fax machine and receive the fax. SHARED VOICE/FAX LINE: Sample Plain Paper Printhead Black Ink Cartridge 2 Insert Two-Sided Printing Accessory 4 Install Printhead IMPORTANT: The printhead is fragile. Handle carefully. Tip: The printhead requires a firm push and makes an audible click when locked into place. g) Close the printer access door. Connect your printer to the phone line as shown in the illustration if you receive both voice and fax calls at the same phone number, and you have no other equipment connected to this phone line. a) Remove the rear access door. 1-LINE 2-EXT 6 5 Install Ink Cartridges Connect Power Color Ink Cartridge Power Supply and Adapter Software CD and Brochure b) Insert the two-sided printing accessory by rotating it towards you and engage the lower guide pins. a) Lift the printer access door. Make sure the orange tape is removed from the carriage. a) Connect the power supply and adapter. 4952368 a) Remove the black ink cartridge from it's bag. a) Connect a phone cord to your telephone wall jack and the port labeled 1-LINE. b) Connect your phone to the port labeled 2-EXT on the back. c) Turn on Answering Machine Mode by following the steps below: 1) Press the Menu button. IMPORTANT: Insert the printhead immediately upon opening sealed bag. 2) Press the B ck la k In C a ri rt d e g Identify Main Components c) Press in until you hear the duplexer click into position. Printer access door Output tray All-in-One b) Remove the printhead from it's bag. IMPORTANT: Insert ink cartridges immediately upon opening sealed bag. 10 Scanner glass Memory card light EasyShare 5500 OK to highlight Fax Settings. Press OK. Printer Paper-width guide Camera card slots USB port/ Camera input Paper-length guide Photo tray light Main tray Photo tray 3 b) Carefully remove and discard the orange cap. Handle ink cartridges carefully to avoid ink transfer. b) Remove the plastic film from the LCD display. Position the LCD display. 10 3) Press EasyShare 5500 All-in-One Printer OK to select Yes for Ans. Machine Mode. Load Paper c) Pull on the orange tab to remove the protective retainer. c) Press ON. When prompted, use the key to select a language. Black Ink Cartridge a) Load photo paper into the photo tray. 1) Lift the photo tray lid until it remains standing without support. Lid Rear access door OK USB port Power connector 2) Insert the photo paper glossy side down. IMPORTANT: Do not overload the photo tray. Max 20 sheets. c) Insert the black ink cartridge into the printhead. Use the key to select a region. 10 -ON *1K1222* *1K1222* 1K1222 *B* *B* B 8 Calibrate Printer IMPORTANT: Make sure that the photo tray is pushed in. The photo tray light should be lit. 9 Install Windows Software Install Macintosh Software Control Panel Features On/Off Copy Phonebook Fax Magnify Rotate Cancel Cancel More accessories More options More convenience The KODAK EasyShare All-in-One Printer gives you more. Be sure to visit our online store to select from our full line of supplies and accessories at www.kodak.com/go/AiO IMPORTANT: Do not connect the USB cable to the printer until instructed during software installation. a) Connect the USB cable to the printer and your computer. On/Off Phonebook 1 4 Attention 2 abc 3 def EasyShare 5500 Copy Rotate a) Press Start. Wait two minutes for the calibration sheet to print. EasyShare 5500 5 jkl All-in-One OK Printer ghi 6 mno Start Fax Menu Tip: If the calibration sheet does not print properly, see the Troubleshooting section in this setup poster. a) Load the Kodak EasyShare CD into the CD-ROM drive. If instructions do not appear, click Start, then Run. Select CD-ROM drive and type setup.exe, then press ENTER. 7 pqrs 8 tuv 9 wxyz Photo Zoom OK Symbols * 0 # Space Scan Transfer All-in-One Printer Start Scan Transfer Photo OK Kodak's Inkjet Photo Paper Get prints that look great the first time with Kodak's unique backprint technology that automatically enables optimized prints. For the latest updates, visit www.kodak.com/go/downloads Menu b) Load the Kodak EasyShare CD into the CD-ROM drive. The Kodak 5000 AiO Printer Software installer window should be displayed. If not, double click the Kodak 5000 AiO Printer Software CD icon on the desktop. Follow the on screen prompts. For the latest updates, visit www.kodak.com/go/downloads Helpful Tips All-in-One OK 2. Select Print Calibration Page and press OK. Printer b) Remove the calibration sheet from the output tray. Place it face down and align to the left, back corner of the scanner glass, as shown. Pull out the output tray extender to help collect your 8.5"x11" prints. 3. When the print comes out, place it at the back, left corner of the scanner glass. 4. Close the scanner lid and Press START. PROBLEM: My calibration page printed on plain white text paper. SOLUTION: Follow the directions as listed in step 8. Calibration will work successfully on both plain white paper and photo paper. PROBLEM: I cannot print to my desired paper type. SOLUTION: Check to see if the photo tray is pushed in. You can do this by checking if the green photo tray light is illuminated. If it is, all prints will be produced from this tray. If you want to print from the main tray, disengage the photo tray by lifting the photo tray lid and sliding the paper tray toward you (See step 8d). PROBLEM: I have a paper jam. SOLUTION: 1. Press in the tabs on the rear access door to remove the door. 2. Gently pull the paper out of the rollers. IMPORTANT: If the paper tears while removing it, check inside the printer for torn pieces of paper and remove them. Additional jams are likely to occur if all of the torn pieces are not removed. 3. Replace the rear access door. Gently push the door forward until it snaps into place. Value Packs Save up to 50% on everything you print and pay as low as 10 cents a print with our ink and paper Value Packs. b) Follow the on screen prompts to install the AiO Software. c) Double click the Install Software.mpkg icon and follow the on screen prompts. The photo tray light illuminates when the photo tray is pushed in. To use the main paper tray, disengage the photo tray by pulling it towards you. All-in-One OK Printer Wireless Adapter Go wireless with the Kodak Wireless 2.0 USB Bluetooth Adapter. Wireless 2.0 USB Bluetoot h Adapter IMPORTANT: The blue arrow in the corner of the calibration sheet must point to the registration marks as shown. Getting Started d) Choose a destination for the installed software. Click Continue and follow the on screen prompts. You can access and use the AiO Home Center by double-clicking on the icon on your desktop. c) Connect the printer to the USB port. Click Next and follow the on screen prompts. c) Lower the scanner lid and press Start. Remove the sheet from the scanner glass When the calibration is complete. 4x6 Windows The AiO Home Center will enable you to copy, scan, and configure your AiO Printer from the computer. You can also launch Kodak EasyShare software for transferring, viewing, and working with your digital pictures and videos. 4x6 (10cm x 15cm) If prompted, re-boot your computer. Macintosh e) Click Install to perform a basic installation of the software. Click Continue and follow the on screen prompts. The AiO Home Center will enable you to configure your AiO Printer from the computer. You can also order supplies and launch Kodak EasyShare software for transferring, viewing, and working with your digital pictures and videos. Use the Kodak EasyShare AiO drivers to print and scan to your AiO Printer. Is Further Troubleshooting Required? If you need further information to help answer your questions, please contact Technical Support and have your KSN number ready. Your KSN number can be found on the unit after lifting the printer access door as shown. Note: A USB 2.0 cable is required to connect your Kodak All-in-One printer to your Windows or Macintosh OS computer. Available in the Kodak online store or see your local retailer. d) When the EasyShare AiO dialog box appears, close the window. Vista XP KODAK SERVICE NUMBER F330065 Troubleshooting d) Lift the photo tray lid, then slide the photo tray toward you to return to main tray operation. The photo tray light will turn off. EasyShare 5500 OK *F330065* *F330065* Need More Help? Look here for answers: f) Click Restart to complete the installation. If you have additional questions about troubleshooting this device, please visit www.kodak.com/go/5500aiosupport PROBLEM: I cannot get a calibration sheet to print. SOLUTION: When necessary, you can force a calibration sheet to print by following these steps: 1. Press Menu, select Calibrate Printer and press OK. www.kodak.com/go/5500aiosupport User Guide The User Guide is installed with your Kodak AiO Software and is located: Windows Start All Programs Kodak Macintosh Library Documentation Kodak AiO Printers Eastman Kodak Company Rochester, NY 14650 U.S.A. © Eastman Kodak Company, 2007 MC/MR/TM: Kodak, EasyShare. The Bluetooth® trademarks are owned by the Bluetooth SIG, Inc. Printed in the U.S.A. Windows® is a registered trademark of Microsoft Corporation Macintosh® is a registered trademark of Apple Computer, Inc.