User manual EPSON STYLUS CX3200 - SETUP SHEET

Setup Unpacking ink cartridges 4033391-00 xxx Cautions and Notes c English Cautions must be observed to avoid damage to your equipment. Notes contain important information and useful tips on the operation of this product. Using the Copy Feature 1. Preparation x y z { feeder guard paper support USB cable Be sure to use the USB cable that comes with this product. CD-ROM power cord Power cord may come attached in some countries. The contents may vary in certain locations. Remove all tapes and protective materials following the Notice Sheet. Setting Up the Stylus CX 1. Unlocking 3. Insert the ink cartridges as illustrated below. 2. Making a Copy x On Error Scan Recall Save(3sec) y Stop Return to Top z On Error Scan Stop Return to Top { On Error Scan Stop Return to Top | Recall Save(3sec) Reset Reset all(3sec) Cop Copies Value B&W Menu y Color Enter Recall Save(3sec) Reset Reset all(3sec) Cop Copies Value B&W Menu y Color Enter Reset Reset all(3sec) Cop Copies Value B&W Menu y Color Enter x y Press the P On button. Press the Copies/Value buttons to set the number of copies. Press the B&W Copy button (to copy in grayscale), or the Color Copy button (to copy in color). z { | Select Various Copy Modes and Other Options Copies/Value buttons On Error Scan Recall Save(3sec) 2. Attaching the Parts Reset Reset all(3sec) Stop Return to Top This product provides you with a variety of copying options. You can choose from various formats and use many different types of paper. 1. Press one of the Menu buttons until Copy Mode appears on the LCD panel Stop button Co Copies Value B&W Menu py Color Enter 2. Press one of the Copies/Value buttons until the desired copy mode appears. 3. Use the Menu and Copies/Value buttons to make other copy settings. 4. Press the Stop button. The settings you made appear on the LCD panel. See the Copy Guide for the available menu items in each copy mode. Set the paper support to align with the arrows on this product. Note: Install both ink cartridges. This product does not work unless both cartridges are installed properly. 4. Close the scanner unit. Flashing On On Error Scan Recall Save(3sec) Menu buttons Attach the panel in order to view the supported language. On Standard Copy You can copy the original image to various sizes or types of single sheet paper. Recall Save(3sec) Mirror Copy Use the Copies/Value buttons to select Standard from the Copy Mode menu. Note: In the Reduced Margin Copy mode, you can make a copy with a 3-mm bottom margin on paper. 3. Plugging in the Power Cord Scan Reset Reset all(3sec) 5 5 5 You can create the mirror image of an original image on Iron-On Cool Peel Transfer Paper (image flipped from right to left). Use the Copies/Value buttons to select Mirror from the Copy Mode menu. Ink charging starts. It takes about one and a half minutes. While charging, this product produces a variety of mechanical sounds. This is normal. When the P On light stops flashing, ink charging is complete. 4. Installing the Ink Cartridges 1. Press the P On button to turn on this product. On Error Scan Recall Save(3sec) c Stop Return to Top Caution: Do not turn the power off during the ink charging process. Do not load paper until ink charging is complete. BorderFree Copy You can copy to the full page (including the margin area) of paper. Use the Copies/Value buttons to select Borderfree from the Copy Mode menu. Note: Because this feature enlarges the image to a size slightly larger than the paper size, the portion of the image that extends beyond the edges of the paper will not be printed. Repeat Copy You can create multiple copies of an image on a sheet of paper. Use the Copies/Value buttons to select Repeat from the Copy Mode menu. Reset Reset all(3sec) Co Copies Value B&W Menu py Color Enter Press the P On button. 2. Open the ink cartridge packages. Do not remove the blue portion of the tape seal from the top of the cartridges. Note: The ink cartridges packaged with this product are partly used during the initial setup to fully charge the print head. This one-time process consumes a considerable amount of ink but subsequent cartridge sets will last for their full rated life. 2-up Copy You can put two pages of the original images on a sheet of paper. Use the Copies/Value buttons to select 2-up from the Copy Mode menu. 5. Selecting Language You can select your preferred language for use on the LCD panel. For details, see Chapter 1 in the Copy Guide. Do not touch this part. This product is now ready to make copies. See "Using the Copy Feature". If you want to print data or scan images, set up your computer as described below. Small Margin Copy You can make copies with a 1.5-mm margin around all edges of paper. 8 8 123 8 9 10 15 16 17 22 23 24 29 30 31 4 11 18 25 5 12 19 26 6 13 20 27 7 14 21 28 123 8 9 10 15 16 17 22 23 24 29 30 31 Setting Up the Computer 1. Connecting 1. Turn off your Stylus CX. Note: Do not turn on this product until a message prompts you to do so. 2. Connect the USB cable. On Error Scan Recall Save(3sec) Use the Copies/Value buttons to select Small Margin from the Copy Mode menu. Auto Fit Page You can make a copy with enlarging or reducing each page of your document automaticaly to fit the size of paper set in the sheet feeder. Use the Copies/Value buttons to select Auto Fit Page from the Reduce/Enlarge menu. 2. Installing the Software c Reset Reset all(3sec) Caution for Macintosh users: Turn off all virus protection programs before you install the software. 4 11 18 25 5 12 19 26 6 13 20 27 7 14 21 28 Co V For Mac OS X users, see "Installing the Software for Mac OS X". 1. Make sure that this product is off. 2. Insert the software CD into the CD-ROM drive. For users of Mac OS 8.6 to 9.x: Double-click the EPSON icon in the EPSON folder. 3. The EPSON Installation Program dialog box appears. Select Install Software, and then click . 4. Follow the on-screen instructions. 5. For users of Mac OS 8.6 to 9.x After installing the software, choose Chooser from the Apple menu, and then select the icon for this product and the port that this product is connected to. EPSON Installation Program dialog box For users of Mac OS 8.6 to 9.x Press to turn off. Menu Installing the Software for Mac OS X 1. Make sure that this product is off and insert the software CD into the CD-ROM drive. 2. Double-click the Mac OS X Driver folder. Double-click the EPSON TWAIN folder. Double-click your preferred language folder. Double-click the EPSON TWAIN folder. Double-click the EPSON TWAIN 5 Installer icon. Follow the on-screen instructions to install EPSON TWAIN. If the Authorization window opens, click the key icon, enter the administrator's name and password, click OK, and then click Continue. 3. After installing EPSON TWAIN, double-click the EPSON Scan to File folder in your preferred language folder, and then double-click the EPSON Scan to File Installer icon to install EPSON Scan to File. 4. After installing EPSON Scan to File, double-click the Printer Driver folder in the Mac OS X Driver folder, and then double-click CX3200.pkg in your preferred language folder to install the printer software. 5. After installing the software, follow the instruction below to select this product: Double-click Macintosh HD. Double-click the Applications folder. Double-click the Utilities folder. Double-click the Print Center icon. Click Add Printer. Select EPSON USB. Select this product. Click Add. Viewing the Reference Guide To learn more about this product, see the Online Reference Guide. For Windows users 1. Insert the software CD into the CD-ROM drive. The Installer dialog box appears. If the dialog box does not appear, double-click SETUP.EXE in the CD-ROM. 2. Select User Guides and click . For users of Mac OS 8.6 to 9.x 1. Insert the software CD into the CD-ROM drive. 2. Double-click the EPSON icon inside the EPSON folder, then select User Guides and click . Note: If the "Add New Hardware Wizard" dialog box appears, click Cancel and disconnect the USB cable from this product.Then return to step 1. Connecting. Note for Windows users: You may need to restart your computer while installing the software. If a message instructing you to restart appears, remove the software CD, then click Restart. After restarting make sure this product is off, then reinstall the software. This product is now ready to print and scan. The Reference Guide includes detailed information about printing and scanning. To view the Reference Guide, see "Viewing the Reference Guide". For Mac OS X users 1. Insert the software CD into the CD-ROM drive. 2. Double-click the Manual folder inside the EPSON folder, then double-click the REF_G folder in your preferred language folder. Then double-click the INDEX.HTM.