User manual CANON POWERSHOT A410 - SOFTWARE STARTER GUIDE (FOR THE CANON DIGITAL CAMERA SOLUTION DISK VER.25)

ENGLISH Windows/Macintosh Software Starter Guide (For the Canon Digital Camera Solution Disk Version 25) You must install the software bundled on the Canon Digital Camera Solution Disk before connecting the camera to the computer. Software Starter Guide For Version 25 Windows Install the software. Connect the camera to the computer. Macintosh Windows Macintosh p. 11 p. 50 · This guide explains how to install the software programs and briefly introduces their functions and operating procedures. · Please read the software license agreement in this guide before using the software. By using the software, you agree to be bound by the terms of the agreement. CDI-E201-010 xx04xxxx © 2005 CANON INC. PRINTED IN JAPAN SAFETY PRECAUTIONS The precautions noted within this guide are intended to instruct you in the safe and correct use of the products and to prevent injuries or damage to yourself, other persons and property. Please read and ensure that you understand them before proceeding to other sections of the guide. Canon Customer Support For Canon Customer Support contacts, please see the Canon Limited Warranty supplied with your camera. Warnings This symbol indicates topics that could lead to death or serious injury if ignored or handled incorrectly. ArcSoft Customer Support North America 46601 Fremont Blvd., Fremont, CA 94538 Tel: (510) 440-9901 (Mon. - Fri., 8:30 AM - 5:30 PM PST) E-mail: support@arcsoft.com Warnings · Do not play the supplied CD-ROM(s) in any CD player that does not support data CDROMs. Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer from hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player. Other Regions Please see the ArcSoft web site: http://www.arcsoft.com/maininternational.html. Disclaimer · While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice. · No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon. · Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the software, the CompactFlashTM cards (CF cards), personal computers, peripheral devices, or use of non-Canon CF cards. Trademark Acknowledgments · ArcSoft, the ArcSoft logo and ArcSoft PhotoStudio are trademarks or registered trademarks of ArcSoft, Inc. · Adobe is a trademark of Adobe Systems Incorporated. · CompactFlash is a trademark of SanDisk Corporation. · Macintosh, Mac OS and QuickTime are trademarks of Apple Computer Inc., registered in the United States and other countries. · Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. · Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies. Copyright © 2005 Canon Inc. All rights reserved. i READ CAREFULLY BEFORE USING Canon Software License Agreement IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM IN THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. This is a license agreement (the "Agreement") between you and Canon Inc. ("Canon"). IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE PROGRAM ON THE CD-ROM (INCLUDING ALL SOUND AND IMAGE DATA) AND THE USER MANUAL IN THIS BOX (COLLECTIVELY, THE "SOFTWARE") AND PROMPTLY RETURN THE SOFTWARE TO YOUR POINT OF PURCHASE FOR A REFUND. In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement. 1. LICENSE: Canon grants you the personal, non-exclusive right to use the SOFTWARE only on a single computer. You may physically transfer the SOFTWARE from one computer to another provided that the SOFTWARE is used on only one computer at a time. You shall not install or use the SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware configuration where the SOFTWARE is accessible to more than one CPU or to more than one user. With respect to the sound and image data ("Data") contained in the Software, which are to be downloaded to the applicable Canon digital camera product, Canon grants you a personal, nonexclusive license to use the Data on a single Canon digital camera product only. YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE USE, TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING LANGUAGE, ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT. 2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up purposes, or copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and retain the original for back-up purposes. Any other copying of the SOFTWARE is a violation of this Agreement. You must reproduce and include the copyright notice on the back-up copy. 3. SUPPORT AND UPDATES: Neither Canon, nor its subsidiaries, dealers or distributors will be responsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service or correction of errors or that the functions or performance of the SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED ON AN "AS IS" BASIS AND WITHOUT WARRANTY OR CONDITION OF ANY KIND. The CD-ROM storing the SOFTWARE is warranted only against defective material under normal use for a period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection. The Replacement CDROM will be warranted for the remainder of the original ninety (90) day warranty period of the defective CD-ROM. The limited warranty does not apply if the failure of the CD-ROM resulted from accident, abuse or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE. EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON'S SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. NEITHER CANON NOR ANY OF CANON'S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION, DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF. ii NEITHER CANON, NOR ANY OF CANON'S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY. SOME STATES, PROVINCES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF THE SELLER, SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY TO YOU. 5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in effect until expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may terminate this Agreement by destroying the SOFTWARE. This Agreement will also terminate without notice to you if you fail to comply with any of the terms of this Agreement and you must then promptly return the SOFTWARE. In addition, Canon may enforce its other legal rights. 6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the SOFTWARE with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3chome, Ohta-ku, Tokyo 146-8501, Japan. 7. EXPORT RESTRICTIONS: You agree to comply with all export laws and restrictions and regulations of the country involved, and not to export or re-export, directly or indirectly, the SOFTWARE in violation of any such laws and restrictions and regulations, or without all necessary approvals. 8. SEVERABILITY: In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect. 9. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the Software in the United States of America shall be governed and construed in all respects in accordance with the laws and regulations of the State of New York, without reference to choice of law principles. The terms of this Agreement as it relates to purchases of the Software in Canada shall be governed by the laws of the province of Ontario. 10.OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the SOFTWARE is subject to the laws of the United States, and Canada, and other applicable copyright and trademark laws, and nothing in this Agreement constitutes a waiver of the rights of Canon, its affiliated corporations and third party licensors under such laws. You only own the CD-ROM media in which the Software is stored. Except as expressly provided herein, no license or right, express or implied, is hereby conveyed or granted by Canon to you for any intellectual property of Canon. Nothing contained in Paragraph 1 shall be construed to give Canon any ownership rights in any images, graphics or textual material that you save in connection with the Software. You may not modify, remove or delete any or all copyright notices (i) which are contained in the Software, including any copy thereof, and (ii) which are on the original CD-ROM and on the medium of a back-up copy made pursuant to Section 2 above. 11.ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON. 1 Table of contents Table of contents ............................................................................... 1 Read This First 3 It's so Simple! Make Prints Right at Home Like a Pro ...................... 4 Unbounded Possibilities with Entertaining Software ..................... 6 System Requirements ........................................................................ 8 Programs and Compatible Operating Systems ................................ 9 Before You Connect the Camera to the Computer ....................... 10 Using the Software on the Windows Platform ­ Preparations Using the Software on the Windows Platform ­ The Basics 11 Installing the Software and USB Driver .......................................... 11 16 Downloading Images to the Computer .......................................... 16 Printing Images ................................................................................ 21 Using the Software on the Windows Platform ­ Advanced Techniques 27 The ZoomBrowser EX Windows ...................................................... 27 ZoomBrowser EX Features .............................................................. 33 Replaying Movies ............................................................................. 36 Editing Movies ................................................................................. 37 Converting RAW Images ................................................................. 38 Operating the Shutter Remotely .................................................... 41 Merging Panoramic Images - PhotoStitch ...................................... 44 Enjoy Customizing Your Camera with the My Camera Settings ... 45 Using the Software on the Macintosh Platform ­ Preparations Using the Software on the Macintosh Platform ­ The Basics 50 Installing the Software .................................................................... 50 52 Downloading Images to the Computer .......................................... 52 Printing Images ................................................................................ 56 2 Table of contents Using the Software on the Macintosh Platform ­ Advanced Techniques 60 The ImageBrowser Windows .......................................................... 60 ImageBrowser Features ................................................................... 66 Replaying Movies ............................................................................. 69 Editing Movies ................................................................................. 70 Converting RAW Images ................................................................. 71 Operating the Shutter Remotely .................................................... 73 Merging Panoramic Images - PhotoStitch ...................................... 76 Enjoy Customizing Your Camera with the My Camera Settings ... 77 Appendices 82 ArcSoft PhotoStudio ........................................................................ 82 Uninstalling the Software ............................................................... 84 Memory Card Folder Structure ....................................................... 87 Method for Downloading to a Computer without Additional Software 88 Troubleshooting .............................................................................. 89 Information about Your Camera 98 Non-Supported Programs and Features ......................................... 98 Index ................................................................................................. 99 Using the PDF Manuals The following PDF-format manuals (hereafter PDF manuals) are provided to explain the features and procedures for using ZoomBrowser EX and ImageBrowser. · ZoomBrowser EX Software User Guide (Windows) · ImageBrowser Software User Guide (Macintosh) Adobe Reader or Adobe Acrobat Reader must be installed to read the aforementioned PDF manuals. If one of these applications is not already installed on your computer, download it from the following website. http://www.adobe.com/products/acrobat/readstep2.html Viewing PDF Manuals Viewing Manuals Downloaded from a Website These PDF-format manuals are available on the Canon website. Use your browser program to download these manuals from the following URL: http://web.canon.jp/Imaging/information-e.html 3 Read This First This chapter explains what you can accomplish using the camera with the software contained on the Canon Digital Camera Solution Disk. It also lists the computer system configurations required to use the software. About this Guide · The explanations in this guide are based on Windows XP and Mac OS X v10.3. If you are using another version of these operating systems, the actual screen contents and procedures may vary slightly from those shown. · The following terms are used in this guide. Mac OS X is used for Mac OS X (v10.2-v10.3) Memory card is used for CF cards, SD cards, MultiMediaCards and PC cards. 4 It's so Simple! Make Prints Right at Home Like a Pro It's so Simple! Make Prints Right at Home Like a Pro Shoot the images See your Camera User Guide for shooting instructions. Install the software on the computer Windows (p. 11) Macintosh (p. 50) Just install the software once at the beginning. 5 Connect the camera to the computer Precautions for Connecting the Camera to the Computer (p. 10) Download images to the computer Windows (p. 16) Macintosh (p. 52) Print the images Windows (p. 21) Macintosh (p. 56) 6 Unbounded Possibilities with Entertaining Software Unbounded Possibilities with Entertaining Software Print a Variety of Layouts Print with the diverse layouts available in ZoomBrowser EX/PhotoRecord (Windows) and ImageBrowser (Macintosh). The examples shown are from ZoomBrowser EX and PhotoRecord (Windows). Make your pleasurable memories into photo albums/ collections with Layout Print. With One Photo per Page Print, printing images is also easy. Confirm all your images in one glance with index (contact sheet) printing. Stitch a Panorama Together Create a panoramic image from a series of images with PhotoStitch. 7 Send an Image as an E-mail Attachment Attach an image to an e-mail message by starting your mail software from within ZoomBrowser EX (Windows) or ImageBrowser (Macintosh). Edit a Movie You can edit movies, linking movies and stills that have been downloaded to the computer, adding text, such as titles, adding background music or applying various special effects. Extract Stills from Movies You can extract a still from the displayed movie and save it as a new image file. You can also specify a range of frames and extract multiple stills. 8 System Requirements System Requirements Please install the software on a computer meeting the following minimum requirements. Windows OS Windows 98 Second Edition (SE) Windows Me Windows 2000 Service Pack 4 Windows XP (including Service Pack 1 and Service Pack 2) The above OS should be pre-installed on computers with built-in USB ports. Pentium 500 MHz or higher processor Windows 98 SE/Windows Me: 128 MB or more Windows 2000/Windows XP: 256 MB or more USB ·Canon Utilities - ZoomBrowser EX: 250 MB or more (Including the PhotoRecord printing program) - PhotoStitch: 40 MB or more ·Canon Camera TWAIN Driver: 25 MB or more ·Canon Camera WIA Driver: 25 MB or more ·ArcSoft PhotoStudio: 50 MB or more 1,024 x 768 pixels/High Color (16 bit) or better Computer Model CPU RAM Interface Free Hard Disk Space Display Macintosh OS Computer Model CPU RAM Interface Free Hard Disk Space Mac OS X (v10.2-v10.3) The above OS should be pre-installed on computers with built-in USB ports. PowerPC G3/G4/G5 256 MB or more USB ·Canon Utilities - ImageBrowser: - PhotoStitch: ·ArcSoft PhotoStudio: 1,024 x 768 pixels/32,000 Colors or better 200 MB or more 40 MB or more 50 MB or more Display 9 · A CD-ROM drive is required to install the software. · Even when system requirements are met, not all computer functions can be guaranteed. · A sound card is required to play movie file audio tracks under Windows. · With Windows, QuickTime 6.5 is required to save images merged with PhotoStitch as the QuickTime VR type. It is also required to play and edit movies on the Windows 98 SE, Windows Me and Windows 2000 platforms and to edit movies with Windows XP. QuickTime is included on the Canon Digital Camera Solution Disk. · Macintosh software cannot be used on disks formatted in the UFS (Unix File System) format. Programs and Compatible Operating Systems The CD-ROM labeled "Canon Digital Camera Solution Disk" is provided with all models. It contains the following programs. Windows Programs Compatible OS Program Windows Windows Windows Windows 98 Me 2000 XP *3 *3 Major Functions ZoomBrowser EX TWAIN Driver WIA Driver PhotoRecord*1 PhotoStitch*1 ArcSoft PhotoStudio*1 *2 *1 *2 *3 *4 *3 *3 Downloading, displaying, organizing and editing images *4 Driver for Canon brand cameras (for Windows 98, Windows 2000) *4 Driver (Windows Me) Layout and printing Merging images to make panoramas Advanced image editing Can be started from within ZoomBrowser EX. Image editing program manufactured by ArcSoft, Inc. Compatible with Windows 98 SE only. Driver not required because Windows XP supports PTP. Macintosh Programs Compatible OS Program Mac OS X Major Functions Downloading, displaying, organizing and editing images Merging images to make panoramas Advanced image editing ImageBrowser PhotoStitch*1 ArcSoft PhotoStudio*1 *2 *1 Can be started from within ImageBrowser. *2 Image editing program manufactured by ArcSoft, Inc. See ArcSoft PhotoStudio (p. 82) for information about this program. 10 Before You Connect the Camera to the Computer Before You Connect the Camera to the Computer Ensure that you have installed the software from the supplied Canon Digital Camera Solution Disk before you connect the camera to the computer. Precautions for Connecting the Camera to the Computer · Use the interface cable to attach the camera directly to a USB port on the computer, not through a USB hub. The connection may not operate correctly through a USB hub. · The connection may not operate correctly if you are using other USB devices, excluding USB mice or keyboards, at the same time as the camera. If this occurs, disconnect the other devices from the computer and try reconnecting the camera. · Do not connect two or more cameras at the same time to the same computer via the USB interface. The connections may not operate correctly. · Never allow the computer to go into standby (sleep) mode while a camera is connected via the USB interface. If it does happen, never disconnect the interface cable. Try to awaken the computer with the camera in the connected state. Some computers will not awaken properly if you disconnect the camera while they are in standby (sleep) mode. Please refer to your computer manual for instructions regarding the standby (sleep) mode. · You are recommended to power the camera from a household power source (AC adapter) when connecting to a computer (if available for your camera model). Ensure that you use fully charged batteries if you will not be using a household power source. · See the Camera User Guide for procedures connecting the camera to the computer. 11 Using the Software on the Windows Platform ­ Preparations This chapter explains the basic procedures for installing the software and connecting the camera to a computer. Read this material before you connect the camera to the computer. Installing the Software and USB Driver Start by installing the software from the Canon Digital Camera Solution Disk. · You must install the software before you connect the camera to the computer. · Users of Windows XP and Windows 2000 must first log in as an Administrator (computer system administrator) to install programs. See ArcSoft PhotoStudio (p. 82) for details on how to install ArcSoft PhotoStudio. Items to Prepare · Your camera and computer · Canon Digital Camera Solution Disk · Interface cable supplied with the camera Installation Procedures 1 Confirm that the camera is NOT connected to the computer. If it is, disconnect the cable. The software cannot be properly installed if the camera is connected to the computer at the start. 2 Close any programs that are running. 12 Installing the Software and USB Driver 3 Place the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. If the installer panel does not appear automatically, use the following procedures. How to Display the Installer Panel Use the following procedures to display the installer panel if it does not appear automatically. Windows XP 1. Select [My Computer] from the [Start] menu. 2. Right-click the CD-ROM icon and select [Open]. 3. Double-click the [SETUP.EXE] icon. Windows 2000, Windows Me, Windows 98 SE 1. Double-click the [My Computer] icon on the desktop. 2. Right-click the CD-ROM icon and select [Open]. 3. Double-click the [SETUP.EXE] icon. Some computers may not display the [.EXE] file name extension as shown above. 4 Click the Digital Camera Software [Install] button. Installer Panel Follow any instructions to restart your computer, if they appear. If the following window appears, continue with the installation. 5 13 Click [Next]. 6 Select [Easy Installation] as the setup type and click [Next]. Select [Custom Installation] to select programs individually for installation. When [Custom Installation] is Selected The USB driver (the software for connecting) is required when the camera is connected to the computer with an interface cable. Ensure that you select a USB driver from below (the appropriate one for your operating system). ·Windows 2000/Windows 98 SE: Canon Camera TWAIN Driver ·Windows Me: Canon Camera WIA Driver With Windows XP, the USB driver supplied with the Windows operating system is used so there is no need to install a USB driver. 7 8 Click [Yes] if you agree to all of the terms of the software license agreement. Review the installation settings and click [Next]. Follow the onscreen instructions to proceed. The items displayed here differ according to the software installed. 14 Installing the Software and USB Driver 9 When the installation is over, select [Yes, I want to restart my computer now.] and click [Finish]. At this stage, do NOT remove the Solution Disk from the CD-ROM drive yet. Users of Windows XP and Windows 2000 must log in as an Administrator (computer system administrator) after restarting to carry out the subsequent procedures. 10 Remove the disk from the CD-ROM drive when your normal desktop screen appears after restarting. This concludes the software installation. Continue by connecting the camera to the computer so that the USB driver can be utilized. If you installed a USB driver, so far the required files have only been copied to your computer. You must now connect the camera to the computer with the interface cable to complete the installation and prepare the driver for use. See Uninstalling the Software (p. 84) to delete the installed programs. 11 Attach the camera to the computer with the interface cable and set the camera to the correct mode for connecting. Procedures for attaching the camera to the computer and placing the camera in the correct mode for connecting vary between camera models. See the Camera User Guide. 15 If the Digital Signature Not Found window appears, click [Yes]. The USB driver will automatically finish installing onto the computer when you attach the camera and open a connection. Dialogs similar to the following will appear during this process (first time the camera is connected to a computer only). Windows XP The dialog on the right will appear after a few moments. Windows 2000/Windows Me/Windows 98 SE Restart the computer according to the instructions if you are prompted to do so by a message. A dialog allowing you to set the default settings will display after installation. See Using the Software on the Windows Platform ­ The Basics (p. 16) for the subsequent procedures. · See USB driver installation not proceeding well in the Troubleshooting section (p. 89) if you are having problems installing the USB driver. · See Uninstalling the USB Driver (p. 85) to delete the USB driver installed with these procedures. · See If You Were Using ZoomBrowser EX Version 2 or 3 (p. 96) if you were previously using either version. This concludes the software and USB driver installation and the procedures for connecting the camera to the computer. You may now download camera images to the computer (p. 16). 16 Using the Software on the Windows Platform ­ The Basics This chapter explains the procedures for using ZoomBrowser EX to download the camera's images to the computer and print them. Read this chapter after completing the preparations in the Using the Software on the Windows Platform ­ Preparations section. Downloading Images to the Computer Begin by downloading the images to your computer. The downloading procedure is slightly different according to whether you are using a camera to computer connection (see below) or a memory card reader (p. 19). Camera to Computer Connection 1 Attach the supplied interface cable to the computer's USB port and the camera's DIGITAL Terminal. Prepare the camera for communication with the computer. Procedures for attaching the camera to the computer and placing it in the correct mode for connecting vary between camera models. See the Camera User Guide. The Camera Control Window will appear. Camera Control Window 17 First Time Camera is Connected to a Computer Set the following settings the first time you connect the camera to the computer. These procedures are not required from the second connection onward. Select [Canon CameraWindow] when a dialog (Events dialog) similar to that on the right displays and click [OK]. Your camera model name or [Canon Camera] will appear here. Different programs may display according to your computer setup. If this Events dialog does not appear, click the [Start] menu and select [All Programs] or [Programs], followed by [Canon Utilities], [CameraWindow] and [CameraWindow]. 2 Download the images. Download the images using the camera or the computer. By default, the downloaded images are saved into the [My Pictures] folder. Placing a check mark here causes this window to automatically open when the camera and computer are connected. You can adjust the settings, such as the type of image downloaded and the destination folder, by clicking [Preferences]. 18 Downloading Images to the Computer Using the Camera to Download Images (Direct Transfer Function) · If the conditions are right for the Direct Transfer function, the Direct Transfer settings menu will appear in the LCD monitor. In addition, the (Print/Share) button will light if your camera is equipped with one. · See the Camera User Guide for instructions regarding Direct Transfer settings and procedures. Set the Direct Transfer settings on the camera and press the (Print/Share) button or the [SET] button. Using the Computer to Download Images Click [Starts to download images]. · By default, all the images that have yet to be downloaded will download. ·To download images that have had their transfer settings set with the camera, click [Preferences] and select [Images whose transfer settings were specified with the camera] as the image type to be downloaded. · Click [Lets you select and download images] to show the camera images in a list, check the images before downloading and download only selected images. The downloaded images will be saved into folders according to their shooting date. 19 By default, when downloading is complete, the thumbnails (tiny versions) of the downloaded images display in ZoomBrowser EX's Main Window. Thumbnail The downloaded symbol displays on downloaded folders (the symbol will disappear when you exit ZoomBrowser EX). Next, print out the images (p. 21). Memory Card Reader Connection 1 Insert the memory card into the reader. Use a separately sold card adapter if required. See the manual for the memory card reader for its connection and handling instructions. (2) Insert the loaded adapter into the slot. (1) Place the memory card in an adapter if required. The card adapter and memory card shape may vary according to the type of memory card your camera utilizes. 2 Select [View/Download Images using Canon CameraWindow] when the dialog to the right appears and click [OK]. The Camera Control Window will display. If the dialog above fails to appear, click the [Start] menu and select [All Programs] or [Programs], followed by [Canon Utilities], [CameraWindow] and [CameraWindow], and proceed to Step 3. 20 Downloading Images to the Computer 3 Click [Starts to download images]. You can adjust the settings, such as the type of image downloaded and the destination folder, by clicking [Preferences]. · By default, all the images that have yet to be downloaded will download to the [My Pictures] folder. · To download images that have had their transfer settings set with the camera, click [Preferences] and select [Images whose transfer settings were specified with the camera] as the image type to be downloaded. · Click [Lets you select and download images] to show the memory card images in a list, check the images before downloading and download only selected images. · See Memory Card Folder Structure (p. 87) for information about memory card folder structures and file names. The downloaded images are saved into folders according to the shooting date. By default, when the download is complete, the thumbnails (tiny versions) of the downloaded images display in ZoomBrowser EX's main window. Next, print out the images (p. 21). 21 Printing Images There are three ways in which images may be printed: One Photo per Page Print, Index Print and Layout Print. This section explains the One Photo per Page Print and Layout Print sections. · Movies cannot be printed, but you can print stills after they have been extracted from movies and saved to files. · To use the Index Print option, click [Print] in the Main Window, followed by [Index Print]. One Photo per Page Print This option prints one image per page in a standard "photo" format. If you select multiple images, it will print them on the corresponding number of pages. 1 Click [Print] in ZoomBrowser EX's Main Window, followed by [One Photo Per Page Print]. · If you have installed the EasyPhotoPrint program that accompanied a Canon-brand printer, you will proceed to the Easy-PhotoPrint printing window shown at the right when you select [One Photo Per Page Print] according to the default settings. If a window similar to it opens, read the Help menu for EasyPhotoPrint for instructions to proceed. · To proceed to the ZoomBrowser EX printing window as shown in Step 2 when you select [One Photo Per Page Print], click the [Tools] menu and select [Preferences], followed by the [Print] tab. Select [Use ZoomBrowser EX Print Functions]. 22 Printing Images 2 After confirming that [1. Select Images] is selected, select images. You can select multiple images by holding the [Ctrl] down while clicking on successive images. The background of selected images changes to blue. 3 Click [2. Printer and Layout Settings] and adjust the categories as you feel necessary. Selects the printer and the paper size etc. Sets printing to "borderless," etc. Place a check mark here to print shooting date/time information with images. Sets the number of print copies This button switches between images if multiple images were selected. 4 Click [3. Print]. Printing will start. 23 Layout Print This option uses the PhotoRecord printing utility to arrange multiple images on a single page and print them like an album. This section explains the basic flow of steps to use PhotoRecord. Please see the PhotoRecord Help menu for detailed instructions. 1 Click [Print] in ZoomBrowser EX's Main Window, followed by [Layout Print]. 2 Confirm that [1. Select Images] is selected and proceed to select images. You can select multiple images by holding the [Ctrl] key down while clicking on successive images. The background of the selected image(s) will turn blue. 24 Printing Images 3 Click [2. Select Captions for Printing] and place a check mark beside the type of information that will be printed with the images. If you select [Date and Time], for example, you can print the images with their shooting dates and times included. You can add a comment to an image in the Properties Window (p. 32). 4 Click [3. Open Layout Print]. PhotoRecord will start, displaying the selected image and the information selected in Step 3 in the Album window. In addition, the steps that will take you through the printing process will display on the left side. Follow the steps in order to proceed. Album Window The selected images display here. The printing procedures display here. 5 25 Click [2 Select Printer & Album Type]. Once you have chosen a printer, select [Free Form] in the Album type category. 6 Click [3 Select Paper] and select the paper size and orientation. 7 Click [Decorate Album] and change the design of the image background and border as desired. Click the [Themes], [Backgrounds], [Photo Frames], [Text Frames] or [Clipart] button to switch between selections. Perform the procedures according to the instructions beside the symbol. · The [Themes] category provides consistent designs for use throughout an entire album. ·You can also click [Add Titles & Captions] to add text as a title or caption. 26 Printing Images 8 Click [4 Print], confirm the number of copies and other printing settings, and click [Print]. This will start printing. To close PhotoRecord after printing is complete, click . Click [Yes] to save the album or [No] to close it without saving. The ZoomBrowser EX window will reappear when the save procedure is complete. There are numerous varieties of albums. Select one to suit your purposes. Please note that the available album types may vary slightly according to the printer in use. Album Type One Photo Per Page One Photo Per Sheet Free Form Index Fixed Size Photo Mosaic Perforated Paper 8-Sticker Label Description Prints one image on each sheet of paper. Allows images to be freely positioned on the page and printed. Prints thumbnails of the images and their shooting information Exif data*). Allows image heights and widths to be specified and prints. Lines up the specified number of images and prints. Prints on perforated paper. Prints on 8-label sheets. * The shooting information displayed in ZoomBrowser EX and the Exif data that can be printed using PhotoRecord differ slightly. This chapter explained the ZoomBrowser EX basics. Once you have mastered them, try the advanced techniques. Using the Software on the Windows Platform ­ Advanced Techniques (p. 27). · A PDF-format manual for ZoomBrowser EX is also available. It provides further information about the program's features and procedures. See Using the PDF Manuals (p. 2). 27 Using the Software on the Windows Platform ­ Advanced Techniques This chapter explains various ZoomBrowser EX features. Proceed to this chapter once you have mastered the basic ZoomBrowser EX procedures in the Using the Software on the Windows Platform ­ The Basics chapter. To confirm whether your camera supports these functions, please refer to Information about Your Camera (p. 98). The ZoomBrowser EX Windows This section describes the principal ZoomBrowser EX windows: the Main Window, Viewer Window and Properties Window. Main Window This window is for displaying and organizing images downloaded to the computer. Task Area (p. 28) Function Buttons (p. 30) Display Mode (p. 29) Display Control Panel (p. 30) Browser Area (p. 28) Folders Area (p. 28) Switches between showing and hiding the Task Area and Folders Area. 28 The ZoomBrowser EX Windows Task Area · ZoomBrowser EX's tasks are arranged here like an index. · Click a Task button to carry out the desired task. These features are described in ZoomBrowser EX Features (p. 33) Folders Area · Use this area to select folders. The images in the selected folder display in the Browser Area. If you select a network drive in advance with Windows Explorer, you can display network folders, but you cannot add, change or delete those folders in the Browser Area. · If you selected Favorite Folders, only the folders registered in advance as Favorite Folders will display. You are recommended to register a folder that you use frequently as one of the Favorite Folders. If you selected All Folders, all the folders will display. Methods for Registering a Favorite Folder · If [Favorite Folders] is displayed: click [Add] and select a folder. · If [All Folders] is displayed: select a folder and click [Add to Favorites]. · To delete a folder in the Favorite Folders area, select a folder and click the [Delete] button. Browser Area · The images in the folder selected in the Folders Area will display here. The display style will vary according to your Display Mode selection. Methods for Selecting Images in the Browser Area · Selecting a single image: click on an image. · Selecting multiple images: click on the first image and then hold the [Ctrl] key down while clicking on additional images. · Selecting consecutive images: click on the first image and then hold the [Shift] key down while clicking on the last image. · You can sort the image order in the Browser Area by file name, shooting date or other characteristics by clicking the [Tools] menu and selecting [View] and [Sort by]. · The following icons will display around images according to their attributes. Images shot with the camera's Stitch Assist mode RAW images Movies Images with sound memo attachments Protected images Images shot with the camera's AEB function Images shot with the camera on end that are rotated in the display only 29 Display Mode · Selects the display style for the Browser Area. Zoom Mode Displays all the images in a folder as thumbnail images. This mode is convenient for searching for images since many can be displayed at once. If additional folders are nested within a folder, their images are displayed as thumbnails as well. If you move the mouse cursor over a folder, will display on the upper right. Clicking here displays that folder zoomed in. Scroll Mode This mode is convenient for checking the images in multiple folders at once. If the displayed folder is at the highest level, then all thumbnails in the lower-level folders also display. You can change the folder level (folder depth) by clicking the [Tools] menu and selecting [Preferences]. The images within nested folders also display. Preview Mode This mode displays the image at a larger size as well as the image information. Positioning the mouse pointer over a thumbnail causes the image to appear at a higher magnification in a Mouse Over Window. You can turn off this function by clicking the [Show Information], and removing the check mark from the [Show Mouse Over Windows] option. 30 The ZoomBrowser EX Windows Display Control Panel · This panel adjusts the display settings for the Browser Area. Selection Menu Fit to Window Use this to select or deselect all Changes the thumbnail size to the images in the Browser Area. fit them into the window. Display Size Changes the size of the thumbnail in the Browser Area. Show/Hide Image Information Menu Use this to display or hide image information beneath the thumbnails, such as the file name, shooting date or Star Rating. Filter Images This feature filters your images by their Star Ratings, displaying only those images in the Browser Area. One of three Star Ratings can be assigned to an image in the Viewer Window, the Properties Window, or Select Button Use this to select images in the information column in the Preview Mode. in Zoom mode. Function Buttons · These buttons are available for executing various functions. View Image Button Displays the selected image or movie in the Viewer Window. Slide Show Button Starts a slide show of the selected images. Rotate Button Rotates the selected image. Properties Button Displays information about the selected image in the Properties Window. Delete Button Search Button Deletes selected Searches for images using such criteria as the images or folders. Star Rating, modification date, shooting date, comments or keywords. 31 Viewer Window Double-click an image in the Browser Area to display it in the Viewer Window. Edit Menu You can edit, eliminating red eyes, adjusting colors, cropping and inputting titles. You can also use it to start up other programs for editing. Print Button Prints the displayed image. Display AF Frame Displays the AF Frame (area used to focus). Shooting Information Display Button Displays image shooting information. Synchronize Button Synchronizes the display settings when multiple images are displayed. Image Selector Button Switches between images. Displays images in the Viewer Window at their actual size. Sets the image display size to the size in the Viewer Window. Split Screen Button Displays multiple images at once. This is handy for comparing images. Zoom Changes the image zoom setting. Star Rating Sets the Star Rating for an image. Full Screen Button Displays the image in the full screen mode. Click the image or press any key on the keyboard to restore the normal display mode. · If a RAW image is displayed, the [Display Original Image] button displays beneath it. Clicking this button displays the converted image in the Viewer Window. · If you are using Windows XP and display a movie file, the (Capture Still Frame) button will display beside the Star Ratings. Clicking this button extracts still images from movies. 32 The ZoomBrowser EX Windows Properties Window The Properties Window displays when you select an image in the Browser Area and click the Properties button. The Properties Window does not display in the Preview Mode. Shows or hides categories. Star Rating Sets the Star Rating for an image. Plays a sound memo attached to an image. Protect Prevents an image from being overwritten or deleted. Comment You can type a comment here. Keywords Sets the keywords used in searches. Brightness Histogram A graph of the highlights and shadows distribution in an image. Shooting Information Displays detailed information about the shooting settings when the image was captured, such as the shutter speed or exposure setting. The camera model will determine what information is displayed. Image Selector Buttons Switches between images. 33 ZoomBrowser EX Features This section briefly introduces the Task Area functions. To confirm whether your camera supports these functions, please refer to Information about Your Camera (p. 98). Acquire & Camera Settings Opens the Camera Control Window, which lets you perform the following operations. Acquire Images Downloads images from the camera/memory card (p. 16, 19). Additionally, you can download sound files recorded with the Sound Recorder function on the camera. Refer to the ZoomBrowser EX PDF manual or Help for download instructions. Print Images Selects and prints the images in a camera or memory card. You can print numerous ways, using DPOF settings, the Index Print option, One Photo per Page Print option, or by selecting images before printing. Set to Camera Sets camera settings, such as the My Camera settings (p. 45). It also uploads images from the computer to the camera/memory card. Remote Shooting Allows you to operate the camera shutter from the computer (p. 41). View & Classify View as a Slide Show Starts a slide show of the images selected in the Browser Area. Rename Multiple Files Changes the file names of the selected images in a single pass. Classify into Folder Classifies images and saves them into a specified folder. Search Performs image searches using criteria such as the Star Rating, modification date, shooting date, comments or keywords. Star Ratings, comments and keywords can be set in the image information column in the Preview Mode or in the Properties Window. 34 ZoomBrowser EX Features Edit Edit Image Allows you to perform image editing, such as cropping, image correction and red-eye correction. You can also use it to start other image editing programs. Stitch Photos Merges multiple images and creates a single large panoramic image (p. 44). Edit Movie Edits movies or still images strung together. You can add text as titles, or background music, and apply various effects (p. 37). Process RAW Images Converts RAW images into standard images. You can adjust the image brightness, contrast and color balance among other attributes during conversion (p. 38). Export Export Still Images Allows you to change the image size or type, and export it as a new image. Export Movies Allows you to change the movie size or type, and export it as a new movie. Extract frames from a movie Extracts still images from movies over a specified interval and saves them as image files (Windows XP only). Export Shooting Properties Allows you to select the necessary data from the shooting information and export it as a text file. Export as a Screen Saver Exports the image as a screen saver file. Export as a Wallpaper Exports the image as a wallpaper file. Backup to CD Copies images to a CD-R/RW disk for backup. The Backup to CD function can only be used on computers satisfying the following requirements. · Windows XP is preinstalled · A CD-R/RW drive is included as standard equipment 35 Print One Photo per Page Print Prints one image per page (p. 21). You can print "photo" prints easily. Index Print Lines up small versions of the images in rows and prints. Layout Print Allows you to arrange multiple images on one page and print them like an album. You can also insert captions and titles (p. 23). Print Using Other Software Select the software to use and then print. Internet Email Images Converts the selected images to the appropriate size for transmission by e-mail. You can also use it to automatically start an e-mail program after conversion. · To return to the previous screen after selecting a task, click [Return to Main Menu] at the bottom of the task screen. · Various Help functions are available in ZoomBrowser EX. Click the [Help] menu, [?] button or [Help] button to display topics about operational procedures or the functions available. 36 Replaying Movies Replaying Movies 1 Double-click an image with a movie icon in ZoomBrowser EX's Browser Area. The Viewer Window will open and play the movie. You can save the displayed scene as a still image by clicking here. You can control the movie's playback and sound volume. Windows 2000, Windows Me and Windows 98 SE QuickTime is required to play and edit movies. To install QuickTime, please follow these procedures. 1. Place the Canon Digital Camera Solution Disk in the CD-ROM drive. If the installer panel fails to appear automatically, display it using the procedures in the How to Display the Installer Panel section (p. 12). 2 Click the QuickTime [Install] button. Follow the onscreen instructions to proceed with the installation. 37 Editing Movies You can create and edit movies: link movies and stills that have been downloaded to your computer, add background music, superimpose titles and other text, and apply various effects to the movies. · The QuickTime program is required to replay or edit movies on the Windows 2000, Windows Me or Windows 98 SE platform or to edit movies on the Windows XP platform. Install it during procedures in the "Replaying Movies" topic in the Windows 2000, Windows Me and Windows 98 SE section (p. 36). · Movies are saved as Motion JPEG AVI movies. 1 2 3 Click [Edit] in ZoomBrowser EX's Main Window, followed by [Edit Movie]. Click [1. Add Images] and select the image (movie or still) you wish to edit. You can select multiple movies or stills. Follow the steps at the left of the window to edit the movie and save it. Follow these steps to proceed. Click this button for detailed operational instructions. Instructions Click this button to play the movie being edited. Storyboard Area Displays thumbnails of the selected images. Links images in order from left to right. Transition Effects Box Appears between adjacent images and displays the symbols of the transition effects linking images. 38 Converting RAW Images Converting RAW Images RAW images are extremely high-quality images that are not subject to any deterioration due to compression processing. Since they are a special type of image, they cannot be opened by many image editing programs. It is first necessary to convert them into standard image files. · See Information about Your Camera (p. 98) to determine whether your camera model supports this function. · See the Camera User Guide for information about the camera settings for shooting RAW images. Procedures for Converting RAW Images 1 Select a RAW image in ZoomBrowser EX's Browser Area. 2 Click [Edit], followed by [Process RAW Images]. Click [OK] when a window displaying procedures for converting and adjusting RAW images appears. The Main Window, the Navigator window and the Image Quality Adjustment Window will display. You can switch between image and rotate images using the buttons in this section. Click here if the navigator Navigator Widow window is not open. Thumbnail Check Mark When the preview image in the main window is zoomed, you can change the portion shown in the preview by clicking and dragging this red symbol. Main Window 3 Adjust the image quality as required in the Image Quality Adjustment Window. This window is explained in the Functions of the Image Quality Adjustment Window section (p. 39). 4 39 Click the (Save), set the file type and destination, and then click [Save]. Selects the images for saving with these settings. Select the method of changing the image type. Set the file destination You can also change the file name This will convert the image. 5 Click the button in the Main window. Functions of the Image Quality Adjustment Window The following adjustments can be made in the Image Quality Adjustment Window. The available settings may vary depending on the camera used. Tone Curve Tab You can set the levels for the RGB channels separately or together. Advanced Adjustments Tab You can select such settings as the output color space. If you cannot set the desired setting with the slider on the left, directly enter the setting here. This section adjusts the white balance according to the light source and color temperature. This section adjusts the digital exposure compensation, photo effect, contrast, sharpness, and saturation. The effect of the settings above can be viewed immediately if you place a check mark here. Applies the settings to the displayed image Restores all settings to the settings stored in the camera at the time of shooting. 40 Converting RAW Images You can change the coloration of the image to your preferred settings when you convert a RAW image. You can also select preset color schemes, such as Positive Film. Furthermore, you can add your own color schemes (My Color) to apply to other RAW images when they are being converted. See the PDF manual for ZoomBrowser EX for more information (p. 2). 41