Macintosh Software Installation Requirements and Notices CPD-14882R1 4040215-00 Contents INSTALLING PRINTER SOFTWARE FOR MACINTOSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Connecting the EPSON Stylus CX3200 . . . . . . . . . . . . . . . . . . . . . . Installing Printer Software on Mac OS 8.6 to 9.x . . . . . . . . . . . . . . . . Installing Additional Software for Mac OS 8.6 to 9.x . . . . . . . . . . Installing Printer Software on Mac OS X . . . . . . . . . . . . . . . . . . . . . Installing Additional Software for OS X . . . . . . . . . . . . . . . . . . . 1 2 3 4 6 REQUIREMENTS AND NOTICES . . . . . . . . . . . . . . . . . . . 7 Windows System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Macintosh System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ink Cartridge Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 9 LCD Panel Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 10 FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Epson America, Inc. Limited Warranty . . . . . . . . . . . . . . . . . . . . . 13 Copyright Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Responsible Use of Copyrighted Materials . . . . . . . . . . . . . . . . . 15 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ii Installing Printer Software for Macintosh Connecting the EPSON Stylus CX3200 Before you start, make sure you set up your EPSON Stylus® CX3200 and installed ink and paper, as described on the Start Here sheet. Then follow these steps to ® connect the EPSON Stylus CX3200 to your Macintosh. 1. Remove the sticker from the USB port on the back of the Stylus CX. 2. Connect the square end of the USB cable to the USB port on the Stylus CX. 3. Then connect the flat end of the cable to a USB port on your Macintosh. Flat end Square end 4. Follow the instructions in one of the next sections to install the printer software on your Macintosh. 1 Installing Printer Software on Mac OS 8.6 to 9.x 1. Insert the EPSON Stylus CX3200 CD-ROM in your CD-ROM or DVD drive. 2. Double-click EPSON on your desktop, if necessary. Then double-click EPSON in the window that opens. 3. Read and agree to the license agreement to continue the installation. 4. When the Software Installation screen appears, click Install. You see the EPSON Stylus CX3200 Installer: 5. Click Start and follow the on-screen instructions to install the driver and restart your Macintosh. Then continue with the instructions in the next section. 2 Installing Additional Software for Mac OS 8.6 to 9.x 1. After your Macintosh restarts, double-click the EPSON CD-ROM icon to open it, if necessary, then double-click EPSON. You see this screen: 2. Click Install and follow the on-screen instructions to install each program. After each one is installed, click Quit to continue. Note that EPSON Smart PanelTM installs in several steps. TM If you see a message about installing QuickTime, click Yes and follow the on-screen instructions. You don't need a registration number. When installation is complete, you see this screen: 3. Click the Register button and follow the instructions to register your Stylus CX. At the last screen, click Quit or close your browser. 4. Click Exit. Remove the CD-ROM and keep it in case you need to reinstall any software later. 3 5. Open the Chooser from the Apple menu. Select CX3200, then select your USB port and turn on background printing. 6. Close the Chooser. You're ready to copy, scan, and print. Installing Printer Software on Mac OS X Before you start, make sure you set up your EPSON Stylus CX3200, installed ink and paper, and connected it to your Macintosh as described on the Start Here sheet. Then follow these steps to install your drivers and additional software. 1. Insert the EPSON CD-ROM in your CD-ROM or DVD drive. 2. Double-click EPSON on your desktop. 3. Then double-click the CX3200 icon in the window that opens. Double-click CX3200 4. If you have an administrator password, you need to enter it before you can continue. With OS X 10.2x, enter your password and click OK. 4 With OS X 10.1x, you see this screen: Click the lock icon Click the lock icon, then enter your password and click OK. 5. Click Continue, then read and agree to the license agreement to continue the installation. 6. Select the OS X drive or partition and click Continue. 7. When you see the Easy Install screen, click Install. Click Install 8. Follow the on-screen instructions to complete the installation and restart your Macintosh. Then follow the steps in the next section to install additional software. 5 Installing Additional Software for OS X 1. After your Macintosh restarts, double-click the EPSON TWAIN 5 Installer icon to install EPSON TWAIN. Follow the on-screen instructions. EPSON Scan to File Installer icon to install EPSON 2. Double-click the Scan to File. Follow the on-screen instructions. 3. Double-click to the Film Factory Installer icon to install Film Factory for OS X. Follow the on-screen instructions. PhotoImpression Installer icon to install ArcSoft 4. Double-click the PhotoImpression. Follow the on-screen instructions. User's Guide Installer icon to install your on-screen 5. Double-click the EPSON Stylus CX3200 User's Guide. 6. Open the OS X Applications folder, then open the Utilities folder and double-click Print Center. Note: If you see this screen, click Add. If CX3200(USB) already appears in the Printer list, go to step 9. 7. At the Printer List screen, click Add Printer. 8. Select EPSON USB, click CX3200(USB), then click Add. Your printer appears in the printer list. Click Add 9. Close Print Center. You're ready to copy, scan, and print. 10. Now start up your Macintosh in OS 9.x. Follow the instructions on page 2 to install the OS 9.x drivers and optional software for Macintosh Classic programs. 6 Requirements and Notices Windows System Requirements To use your EPSON Stylus CX3200 and its software, your system should have: A Microsoft® Windows® compatible PC with a Pentium® 300 MHz or better processor Microsoft Windows XP, Windows 2000, Windows Me, or Windows 98 128MB RAM (256MB or more recommended) VGA monitor or better with at least 256 colors At least 200MB of free hard disk space (300MB or more recommended) CD-ROM or DVD drive for installing the software Windows-compliant USB port and the USB cable that came with your EPSON Stylus CX3200. Macintosh System Requirements To use your EPSON Stylus CX3200 and its software, your system should have: ® TM An Apple® iMacTM series, Power Macintosh® G3 or G4, PowerBook, iBook, or eMacTM Mac® OS 8.6 through 9.x or OS X 10.1 or higher (Mac OS 9.1 or later recommended) At least 128MB of available RAM (256MB or more recommended and required with OS X 10.1) At least 200MB of free hard disk space (300MB or more recommended) VGA display or better with at least 256 colors CD-ROM or DVD drive for installing the printer software The USB cable that came with your EPSON Stylus CX3200. 7 Important Safety Instructions Before using your EPSON Stylus CX3200, read and follow these safety instructions: Be sure to follow all warnings and instructions marked on the Stylus CX. Use only the type of power source indicated on the Stylus CX label. Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as air control systems or other high-load devices that regularly switch on and off. Place the Stylus CX near a wall outlet where the plug can be easily unplugged. Placez l'imprimante près d'une prise de contacte où la fiche peut être débranchée facilement. Do not let the power cord become damaged or frayed. If you use an extension cord with the Stylus CX, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. Avoid electrical outlets controlled by wall switches or automatic timers. Keep your Stylus CX and computer system away from potential sources of electromagnetic interference, such as loudspeakers or cordless telephone base units. Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. Leave enough room around the Stylus CX for sufficient ventilation. Do not place the Stylus CX near a radiator or heating vent or in direct sunlight. Place the Stylus CX on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. Leave enough space in front of the Stylus CX (at least 9 inches) so it doesn't tip forward and fall off of the work surface. Turn off and unplug the Stylus CX before cleaning. Clean with a damp cloth only. Do not spill liquid on it. Caution: Always turn the Stylus CX off using the On button. Don't turn off the power using a switch on a power strip or unplug the Stylus CX until the On light is off. Do not block or cover openings in the Stylus CX case or insert objects through the slots. Except as specifically explained in your documentation, do not attempt to service the Stylus CX yourself. 8 Unplug the Stylus CX and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped or the case damaged; if the product does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. Before transporting the Stylus CX, make sure the print head is capped in the far right position, the ink cartridges are in place, and the scanner is secured by the transportation lock. This product includes a lamp component that contains mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. Ink Cartridge Safety Instructions Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may prevent the EPSON Stylus CX3200 from printing. Keep ink cartridges out of the reach of children and do not drink the ink. Be careful when you handle used ink cartridges; there may be ink remaining around the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately with water. Do not put your hand inside the Stylus CX or touch the cartridge during printing. Do not move the print head by hand; otherwise you may damage the Stylus CX. Install the ink cartridge immediately after you remove it from its package. Leaving the cartridge unpacked for a long time before use may result in reduced print quality. Do not use an ink cartridge beyond the date printed on the cartridge package. For best results, use up the ink cartridges within six months of first installing them. Store ink cartridges in a cool, dark place. Store each ink cartridge so that the bottom of its package faces down. After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at least three hours before using it. Do not remove or tear the label or shake an ink cartridge; this can cause leakage. Do not dismantle the ink cartridges or try to refill them. This could result in damage to the print head. Do not touch the green IC chip on the side of the cartridge. This may affect normal operation and printing. 9 If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the Stylus CX. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area. LCD Panel Safety Instructions Use only a dry soft cloth to clean the LCD display. Don't use liquid or chemical cleaners. If the LCD display is damaged, contact your dealer. If LCD solution gets on your skin, wash it off thoroughly with soap and water. If it gets in your eyes, flush them immediately with water. 10 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installat ...