User manual FOSTEX PD-4 - SOFTWARE V2.41

Fostex PD4 Software V2.41 ­ updated by Sandy MacRae 15:10:03 No. Name Function Display Opt 00* 01 02 03 04 00 01 02 03* 04 05 06 07 00* 01 00* 01 02 00 01* 02 00 07* 00 01 02 03* 04 05 06 07 08 09 00* 01 00* 01 00* 01 00 01* 02 00* 01 00 01* 02 03 04 05 06 00 01 02* 03 00 01 02* 03 04 00* 01 00* 01 00* 01 00* 01 02 03 04 05 00* 01 02 00 Description Version off Main CPU version Main CPU date Front CPU version Transport mechanism version 30 seconds 1 minute 2 minutes 3 minutes 4 minutes 5 minutes 10 minutes 20 minutes AES/EBU output format S/P DIF output format AUTO ID OFF ON: S-ID is recorded when RECORD key is pressed ON: S-ID is recorded when detecting a SIGNAL All OFF ON: Battery error, Tape low, Peak over, BER error, Ext. TC off ON: Battery error, Tape low only Minimum contrast level Maximum contrast level OFF 1 second 2 seconds 3 seconds 4 seconds 5 seconds 6 seconds 7 seconds 8 seconds 9 seconds PAUSE function only Alternates between PAUSE and STOP Functions only when MIC is selected Functions for both MIC and LINE Mute function OFF Mute function ON 1% 3% 5% OFF (Analogue Line Out does not follow Monitor Switch) ON (Analogue Line Out follows Monitor Switch) 10.0 V 10.5 V (NiCad) 11.0 V 11.5 V 12.0 V 12.5 V (Lithium Ion) 13.0 V -20 dB -30 dB -40 dB -55 dB 300 ms 600 ms 900 ms 1.2 s 1.5 s Playback Frame Rate at the RECORDED Frame Rate Playback Frame Rate set by FRAME RATE switch Timecode is not output in PAUSE Timecode will be output in PAUSE Automatically switch to GENERATOR Source remains the TAPE Roll/YY/MM/DD DD/MM/YY/Roll MM/DD/YY/Roll Event No./Roll User Definable YY/MM/DD/Roll TC and User Bits are jammed TC ONLY is Jammed - User Bits remain as PD-4 User Bits ONLY are jammed - TC remains as PD-4 Reset all functions to DEFAULT Values 001 VER Display ROM / CPU Version 00 1V Er 00 104 PCT Pause Key Cancel Time Select 10 4P cT 03 105 DOF Digital Output Format Select 106 AID Auto S-ID / P-No. Recording 110 ETN Error Tone Output Select 111 LCD LCD Contrast Select 10 5d of 00 10 6A id 00 11 0e Tn 01 11 1L Cd 07 112 PHT Level Meter Peak Hold Time 11 2P H7 03 113 PSM Pause Key Mode Select 114 LIM Limiter Switch Function Select 116 RMM Record Monitor Speaker Mute Select 117 PEL PCM Error LED Level Select 11 3P SM 00 11 4L 1M 00 11 6r MM 00 11 7P EL 01 11 8L MS 00 11 9b aL 01 118 LMS Line Out Monitor Switch Select 119 BAL Battery Alarm Voltage Level 201 AIL Auto ID Record Level Select (Function 106 set to AUTO 02) 20 1A iL 02 20 2A i7 02 40 17 CF 00 40 3S 7C 00 40 87 Co 00 41 1v db 00 41 2J AM 00 80 1M rS 00 202 AIT Auto ID Record Time Select (Function 106 set to AUTO 02) Playback TC Frame Rate Select 401 TCF 403 STC Still TC Output Select 408 TCO TC Output Select in PAUSE or STOP 411 UBD User Bit Order Display 412 JAM JAM Key Function Select 801 MRS Memory Reset * Default Setting My Setting