OPERATING INSTRUCTIONS USE OF THE REMOTE CONTROL Press to turn on/off the TV. The TV is never completely powered off unless it is physically unplugged. 0~9/100 Digit buttons To select a TV channel. POWER: MUTE Temporarily interrupt the sound or restore it. DISPLAY Press this button to Display Channel number on the right-top corner. CH MTS /SAP Press or to brows through the TV channels which are not erased. To view a blocked channel, use the digit buttons to access the channel and enter your access code. Press this key to activate Multichannel Television Sound, Stereo or Mono sound. PRE-CH VOL To display the previously selected TV channel. Press + or - to adjust the volume. PC Not Supported. (not functional for this model) SLEEP With this key you can set a time period after which the TV should switch itself to standby. Press the key repeatedly to select the number of minutes. The counter runs from 0,30,60,90,120 minutes. The timer begins to count down from the number of minutes selected after the display has disappeared. MENU Press repeatedly to display OSD menu. V-CHIP Press this button to setup parental control. SWAP Not Supported. (for the model with this function only) SIZE Select your input source: press repeatedly to select TV, AV1, AV2, S-VIDEO or COMPONENT mode, according to where you connected your external source. AV1/AV2 for a VCR connected to the AV connectors of the TV. S-VIDEO for a S-Video VCR connected to the SVIDEO connector of the TV. COMPONENT for a DVD/DTV Set Top Box or another component video device connected to Y, Pb, Pr and to the AV AUDIO inputs L and R. TV/VIDEO PIP Not Supported. (for the model with this function only) CAPTION Not Supported. (not functional for this model) POP Not Supported. (for the model with this function only) Press this button to turn Closed Caption on. Be sure you have selected Caption On in the Setup menu. ...