ORIGINS ¼" CUSTOM PANEL SIZES BI·95 BI·98 75 Series 75 Stainless Series 29 Series 15 Series 15 Stainless Series 13 15/32" H x 12 15/16" H 15 15/16" x 13 15/16" W 28 5/32" H x 22 15/16" W 29 13/32" H x 22 15/16" W 21 13/32" H x 19 13/16" W 28 5/32" H x 13 15/16" W 29 13/32" H x 13 15/16" W Zero clearance on black and white models with a flush/flat door panel. Door will accept a raised panel. Allow proper clearance, on hinge side when installing a raised panel. Amount of clearance will depend on raised panel thickness. The maximum panel thickness when inserted into the door reveal (channel) is ¼" thick. For raised panels, on black and white models, the depth of the reveal is ¼" on both sides and bottom and ½" on top. For raised panels, on stainless steel models, the depth of the reveal is ¼" on both sides, top and bottom. Allow 9/16" clearance on hinge side for all stainless steel models with flush/flat panel. Additional clearance maybe needed, on hinge side when installing a raised panel. Amount of clearance will depend on raised panel thickness. Panel not to exceed 20 pounds. Conversion information: 1 inch = 2.54 cm ...