User manual FUJITSU S2110 - Software Guide

Fujitsu LifeBook S Series BIOS Guide LifeBook S Series Model: S2110 Document Date: 06/30/2005 Document Part Number: FPC58-1351-01 FUJITSU COMPUTER SYSTEMS 1 LifeBook S Series Notebook BIOS S Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there should be no need to set or change the BIOS environment to operate your notebook. The BIOS Setup Utility configures: Selecting a field causes a help message about that field to be displayed on the right-hand side of the screen. Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. Pressing the Enter key again will select the highlighted choice. Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following: 1. Turn on or restart your notebook. 2. Press the [F2] key when a message appears under the Fujitsu logo prompting you to "Press : BIOS Setup". This will open the main menu of the BIOS Setup Utility with the current settings displayed. 3. Press the arrow keys to scroll through the other setup menus to review or alter the current settings. 7. Pressing the [F9] key resets all items in the BIOS to the default values. 8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be asked to verify this selection before it is executed. 9. Pressing the [F1] key gives you a general help screen. Entering the Setup Utility After a Configuration Change or System Failure If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory, or there is a failure in the system, the system beeps and/or displays an error message after the Power On Self Test (POST). If the failure is not too severe, it will give you the opportunity to modify the settings of the setup utility, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press key to continue, to run SETUP 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key. Navigating Through the Setup Utility The BIOS setup utility consists of six menus: Main, Advanced, Security, Boot, Info and Exit. This document explains each menu in turn including all submenus and setup items. The following procedures allow you to navigate the setup utility menus: ], [ ]. 1. To select a menu, use the cursor keys: [ 2. To select a field within a menu or a submenu, use the cursor keys: [ ], [ ]. 3. To select the different values for each field, press the [Spacebar] to change to the next higher selection and [F5] or [-] to go to the next lower selection. 4. To activate a submenu press the [Enter] key. 5. To return to a menu from a submenu, press the [Esc] key. 6. To go to the Exit menu from any other menu, press the [Esc] key. 2 If your notebook emits a series of beeps that sounds like a code and the display is blank, refer to the Troubleshooting section of your system Use's Guide. The Troubleshooting Section includes a list of error messages and their meanings. If your data security settings require it, you may be asked for a password before the operating system will be opened. Main Menu 3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key. 4. When the setup utility starts with a fault present, the system displays the following message: Warning! Error message [Continue] 5. Press any key to enter the setup utility. The system will then display the Main Menu with current parameters values. 3 LifeBook S Series Notebook BIOS MAIN MENU ­ SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current system parameters. Follow the instructions for Navigating Through The Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Main menu and its submenus, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. Note that the actual drive labels shown may vary. System time and date can also be set from your operating system without using the setup utility. Use the Date and Time icon on your Windows Control panel or type time or date from the MS-DOS prompt. Main Advanced PhoenixBIOS Setup Utility Security Boot Info Exit Item Specific Help System Time: System Date: [02:34:56] [06/28/2005] [TOSHIBA MK4025GAS-(PM)] [MATSHITADVD-RAM UJ-840S-(SM)] [English (US)] Adjust calendar clock. , , or selects field. Primary Master Secondary Master Language: F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 1. Main Menu Table 1: Fields, Options and Defaults for the Main Menu Menu Field System Time: Options ­-- Default ­-- Description Sets and displays the current time. Time is in a 24 hour format of hours:minutes:seconds with 2 digits for each. (HH:MM:SS). Example: 16:45:57. You may change each segment of the time separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys. Sets and displays the current date. Date is in a month/day/year numeric format with 2 digits each for month and day and 4 digits for year. (MM/DD/YYYY) for example: 03/20/1998. You may change each segment of the date separately. Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys. System Date: ­-- ­-- 4 Main Menu Table 1: Fields, Options and Defaults for the Main Menu Menu Field Primary Master: Options Selects Primary Master submenu Selects Secondary Master submenu Default The product # of the Hard Drive Description Display the type of device on this ATA/ATAPI interface, if there is one. Pressing the Enter key selects the Primary Master submenu allowing additional device configuration options for this interface. Display the type of device on this ATA/ATAPI interface, if there is one. Pressing the Enter key selects the Secondary Master submenu allowing additional device configuration options for this interface. The default setting differs between the US/European and the Japanese model. Selects the display language for the BIOS. Secondary Master: The product # of the CD drive Language: English (US) Japanese (JP) [English (US)] 5 LifeBook S Series Notebook BIOS Primary Master Submenu of the Main Menu The Primary Master submenu identifies what ATA devices are installed. Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Primary Master [TOSHIBA MK4025GAS-(PM)] Item Specific Help Type: Total Sectors: Maximum Capacity: [Auto] LBA Format 78140160 40008MB [16 Sectors] [Enabled] [Multiword DMA 2] [Disabled] Select ATA/ATAPI drive installed here. [Auto] The BIOS auto-types the drive on boot time. [None] The drive is disabled. Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode: F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 2. Primary Master Submenu Menu Field Type: Options Default [Auto] Description Select Auto to have the type of Serial or Parallel ATA device automatically identified by the BIOS at POST. If None is selected, the following Set-up items do not appear. Logical Block Addressing (LBA) Auto None LBA Format Total Sectors: Maximum Capacity: Multi-Sector Transfers: ---- ----- The total number of sectors on your hard disk The maximum capacity of your hard disk Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled [16 Sectors] This option cannot be changed when Auto is selected. LBA Mode Control: [Enabled] Enables or disables logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected. 6 Main Menu Menu Field Transfer Mode: Options Default [Multiword DMA 2] Description Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected. Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Disabled Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Ultra DMA Mode: [Disabled] Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected. A bootable DVD/CD-ROM may have either a floppy disk or hard drive format. When the bootable DVD/ CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format DVD/CD-ROM is used, the DVD/CD-ROM becomes Drive A. The DVD/CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable DVD/ CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations. Be aware of the operating environment when booting from a DVD/CD-ROM or you may overwrite files by mistake. 7 LifeBook S Series Notebook BIOS Secondary Master Submenu of the Main Menu The Secondary Master submenu is for the internal DVD/ CD-ROM drive. The drive type is displayed on this menu as well as the Main menu. Your notebook autosenses the characteristics of the internal drive installed. You will not need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary. PhoenixBIOS Setup Utility Main Secondary Master [MATSHITADVD-RAM UJ-840S-(SM)] Item Specific Help Type: Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode: [Auto] [Disabled] [Disabled] [Standard] [Disabled] Select ATA/ATAPI drive installed here. [Auto] The BIOS auto-types the drive on boot time. [None] The drive is disabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 3. Secondary Master Submenu Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Type: Options Default [Auto] Description Selects the ATA/ATAPI device type. Select Auto to have the device (CD-ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS at POST. If None is selected, the following Set-up items do not appear. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer. Auto None Multi-Sector Transfers: Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled [Disabled] LBA Mode Control: [Disabled] Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected. 8 Main Menu Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Transfer Mode: Options Default [Standard] Description Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected. Standard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Disabled Mode 0 Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Ultra DMA Mode: [Disabled] Selects the method for moving data to/from the drive. Autotype the drive to select the optimum transfer mode. This option cannot be changed when Auto is selected. Exiting from Main Menu When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu or to move to another menu. 9 LifeBook S Series Notebook BIOS ADVANCED MENU ­ SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Set the I/O addresses for the serial, parallel, and infrared ports (note that serial and parallel ports are found only on the optional port replicator). Set the features of the keyboard/mouse. Select between the display panel and/or an external CRT display. Set internal device configurations Configure USB features. Configure miscellaneous features such as Wake Up On LAN. Configure DMI Event Logging. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information) The following tables show the names of the menu fields for the Advanced Menu and its submenus, all of the options for each field, the default settings and a description of the field's function, and any special information needed to help understand the field's use. Main Advanced PhoenixBIOS Setup Utility Security Boot Info Exit Item Specific Help F1 Help ESC Exit Serial/Parallel Port Configurations Keyboard/Mouse Features Video Features Internal Device Configurations USB Features Miscellaneous Configurations Event Logging Configures serial ports and parallel ports Select Item Select Menu -/Space Change Values Enter Select Sub-Menu Figure 4. Advanced Menu F9 Setup Defaults F10 Save and Exit 10 Advanced Menu Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field Serial/Parallel Port Configurations Description When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify settings for the serial, parallel, and internal ports. The serial and parallel ports are found on the optional port replicator. When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal keyboard and mouse parameters. When selected, opens the Video Features submenu, which allows setting of the display parameters, including routing of video signals to different displays. When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the modem, IDE, and LAN Controllers. Configures USB features. Configures miscellaneous features, such as Wake Up On LAN and Power Button. Keyboard/Mouse Features Video Features Internal Device Configurations USB Features Miscellaneous Configurations Event Logging When selected, opens the event logging submenu. 11 LifeBook S Series Notebook BIOS Serial/Parallel Port Configuration Submenu of the Advanced Menu The Serial/Parallel Port Configuration submenu provides the ability to set the I/O addresses and interrupt levels for the serial, parallel, and internal ports of your notebook and optional port replicator. To prevent IRQ and address conflicts, avoid changing the default settings. If you must change the settings, you can call 1-800-8Fujitsu for technical assistance. The BIOS will warn you of resource conflicts by placing a yellow asterisk next to each device that is in conflict. All I/O addresses in Table 5 are in hexadecimal. I/O addresses, DMA channels, and Interrupt levels can be entered in various ways, including via the BIOS setup utility, the control software for the I/O device, or the hardware. If any two ports or devices, serial or parallel, have the same I/O address assigned your notebook will not function normally. Please keep a record of original settings before making any changes in the event that a restoration is required. See your hardware and software documentation as well as the setup utility to determine settings, limitations, etc. PhoenixBIOS Setup Utility Advanced Serial/Parallel Port Configurations Serial Port: I/O Address: Interrupt: Infrared Port: Mode: I/O Address: Interrupt: I/O Address: DMA Channel: Parallel Port: Mode: I/O Address: Interrupt: [Enabled] [3F8-3FF] [IRQ 4] [Enabled] [FIR] [2E8 - 2EF] [IRQ 3] [480-4BF] [DMA 3] [Enabled] [Bi-directional] [378-37F] [IRQ 7] Item Specific Help [Disabled] The port is disabled. [Enabled] The port is enabled with user configuration. [Auto] Plug & Play OS configure the port. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 5. Serial/Parallel Port Configuration Submenu 12 Advanced Menu Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu Menu Field Menu Field Serial Port: Options Options Default Default [Enabled] Description Description Configures the serial port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). Allows user to set the serial port base I/O address when serial port is Enabled. Disabled Enabled Auto 3F8 - 3FF 2F8 - 2FF 3E8 - 3EF 2E8 - 2EF IRQ 3 IRQ 4 IRQ 10 IRQ 11 Disabled Enabled Auto IrDA FIR 3F8 - 3FF 2F8 - 2FF 3E8 - 3EF 2E8 - 2EF IRQ 3 IRQ 4 IRQ 10 IRQ 11 480-4BF 500-53F 580-5BF DMA 1 DMA 3 Disabled Enabled Auto Output Only Bi-directional ECP I/O Address: [3F8 - 3FF] Interrupt: [IRQ 4] Allows user to set the serial port interrupt when serial port is Enabled. Infrared Port: [Enabled] Configures the infrared port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). When the infrared port is enabled this option is available allowing the user to set the mode for the infrared port. Standard IrDA (IrDA 1.0) transmits data at up to 115.2 Kbps; FIR (IrDA 1.1) transmits at up to 4Mbps. Allows user to set the infrared port I/O address when the infrared port is Enabled. Mode: [FIR] I/O Address: [2E8 - 2EF] Interrupt: [IRQ 3] Allows user to set the infrared port interrupt when the infrared port is Enabled. I/O Address: 480-4BF Allows user to set the FIR port I/O address when the infrared port is Enabled. DMA Channel: Parallel Port: [DMA 3] [Enabled] Allows user to set the infrared port DMA Channel when the infrared port mode is set to FIR. Configures the parallel port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose the configuration (Auto). When the parallel port is enabled this option is available allowing the user to set the mode for the parallel port. Bi-directional allows two-way transfer of information between your notebook and a parallel device. Output Only (Half Duplex) allows information to be transferred in only one direction, from your notebook to the printer or similar device. ECP Mode allows communication with the ECP class of parallel I/O devices. Allows user to set the parallel port base I/O address when the parallel port is Enabled. Mode: [Bi-directional] I/O Address: 378 - 37F 278 - 27F 3BC - 3BF IRQ 5 IRQ 7 [378 - 37F] Interrupt: [IRQ 7] Allows user to set the parallel port interrupt when the parallel port is Enabled. 13 LifeBook S Series Notebook BIOS Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Keyboard/Mouse Features Numlock: [Auto] Hot Plug: [Enabled] Internal Pointing Device: [Auto Disabled] Initialization on Resume: [Fast] Selects power-on state for Numlock. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 6. Keyboard/Mouse Features Submenu Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu Menu Field Numlock: Options Default [Auto] Description Sets the NumLock function state when the computer completes booting. Auto On Off On/Padlock Off Disabled Enabled Auto Disabled Manual Setting Always Enabled Always Disabled Hot Plug: [Enabled] Enables and disables the ability to plug a mouse or keyboard into the PS/2 port and have it immediately recognized and active. Sets the device controlling the mouse cursor on the screen. Always Enabled makes the pointing device always enabled whether there is an external mouse or not. Always Disabled makes the pointing device always disabled. Auto Disabled disables the internal pointing device when an external pointing device is connected to the PS/2 port. When Fast is selected, initialization for the external devices is optimized to speed up on Resume. When Normal is selected, initialization is not optimized. Internal Pointing Device: [Auto Disabled] Initialization on Resume: Fast Normal [Fast] 14 Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Video Features Display: Compensation: [Auto] [Enabled] Select display terminal. * This setting is not effective after operating system starts up. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 7. Video Features Submenu Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Display: Options Default [Auto] Description Selects where the video signal will be routed. Internal Flat Panel External Auto Disabled Enabled Compensation: [Enabled] Enables or disables display compensation. 15 LifeBook S Series Notebook BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help [Disabled] No IDE ports are enabled. [Primary] Only primary IDE port is enabled. [Secondary] Only secondary IDE port is enabled. [Both] Both primary and secondary IDE ports are enabled. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu Main Advanced Internal Device Configurations IDE Controller: Modem Controller: LAN Controller: Wireless LAN [Both [Enabled] [Enabled] [Enabled] F9 Setup Defaults F10 Save and Exit Figure 8. Internal Device Configuration Submenu Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu Menu Field IDE Controller: Options Default [Both] Description Enables or disables selected IDE devices. Disabled Primary Secondary Both Disabled Enabled Disabled Enable Disabled Enable Modem Controller: [Enabled] Enables or disables the modem device. LAN Controller: [Enabled] Enables or disables the LAN controller. Wirelss LAN: [Enabled] Enables or disables the Wireless LAN. 16 Advanced Menu USB Features Submenu of the Advanced Menu The USB Features Submenu enables and disables legacy USB support for your system. PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Main Advanced USB Features Legacy USB Support: SCSI SubClass Support: [Enabled] [Enabled] [Disabled] The feature is disabled. [Enabled] Legacy USB Emulation is enabled and USB devices are available without USB aware OS. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 9. USB Features Submenu Table 9: Fields, Options and Defaults for the ACPI Features Submenu of the Advanced Menu Menu Field Legacy USB Support: Options Default [Enabled] Description When Disabled is selected, legacy USB emulation is disabled. When Enabled is selected, legacy USB emulation is enabled and USB devices are available without USB-aware OS. When Enabled is selected, USB devices that belong to the SCSI subclass in the mass storage class (e.g., USB Memory Key) are enabled. Disabled Enabled SCSI SubClass Support: Disabled Enabled [Enabled] 17 LifeBook S Series Notebook BIOS Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu configures the miscellaneous features for your system. Main Advanced PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Miscellaneous Configurations Power Button: Wake up on LAN: Volume Setting: UMA Video Memory Size: [Disabled] [Disabled] [Middle] [32MB] Configures the power button. *ACPI OS ignores this setting. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 10. Miscellaneous Configurations Submenu Table 10: Fields, Options and Defaults for the Miscellaneous Configurations Submenu Menu Field Power Button: Options Default [Disabled] Description When Disabled is selected, the power button does not respond to a press. When Power Off is selected, the button turns the power off. When Enabled is selected, the system will wake up when the internal LAN device receives a Magic Packet while the system is powered off. Allows you to set or disable the system volume level. Disabled Power Off Disabled Enabled Off Minimum Middle Maximum 16MB 32MB 64MB 128MB Wake up on LAN: [Disabled] Volume Setting: [Middle] UMA Video Memory Size: [32MB] Allows you to select the amount of video memory you want to reserve for video memory. 18 Advanced Menu Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Main Advanced Event Logging Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read: Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter]