AVR 245 WORKSHEETS Default settings, worksheets, remote product codes Table A1 ­ Source Input Setting Defaults Source Title Component Comp V 1 Convert* Video Input Audio Input Coax 1 Auto Poll Surround Mode On Coax 2 Off Convert* Optical 2 Off Comp V 2 Comp V 3 Convert* Analog On Optical 1 On Analog On Convert* Analog On Logic 7 7CH Music Convert* Convert* Convert* Analog On DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/ CD DMP Tape Tuner INT. TUNER Convert* Tuner --Convert* 6-/8Channel --Convert* Analog Off 6-/8XM Channel The Bridge/ Analog DMP --Logic 7 7CH Music On Logic 7 Logic 7 Logic 7 7CH Music 7CH Music 7CH Music Logic 7 Logic 7 Logic 7 7CH Music 7CH Music 7CH Music Logic 7 Logic 7 Logic 7 Logic 7 Logic 7 7CH Music 7CH Music 7CH Music 7CH Music 7CH Music * The default video input for this source is either the composite or S-video input associated with the source. The signal will be transcoded to component video and available at the Component Video Monitor Outputs for use with a compatible video display, but it will not be upscaled. The default shown is the preferred surround mode for PCM and Analog audio sources. Table A2 ­ Speaker/Channel Setting Defaults Source Bass Manager: Global Left/Right Speaker Size Center Speaker Size Surround Speaker Size Small Small Small Small Small Small Small Sub 100Hz 100Hz 100Hz Small Small Small Small Sub 100Hz 100Hz 100Hz Small Small Small Small Sub 100Hz 100Hz 100Hz Small Small Small Small Sub 100Hz 100Hz 100Hz Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right Small Small Small Small Sub 100Hz 100Hz 100Hz Small Small Small Small Sub 100Hz 100Hz 100Hz Small Small Small Small Sub 100Hz 100Hz 100Hz Small Small Small Small Sub 100Hz 100Hz 100Hz Small Small Small Small Sub 100Hz 100Hz 100Hz Large Large Large Large Sub N/A N/A N/A Small Small Small Small Sub 100Hz 100Hz 100Hz Left/Right DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/ CD DMP Tape Tuner 6-/8XM Channel Surround Back Speaker Size Small Subwoofer Sub Left/Right Speaker Crossover 100Hz Center Speaker Crossover 100Hz Surround Speaker Crossover 100Hz Subwoofer Crossover Left/Right Left/Right Left/Right Left/Right Left/Right Left/Right Left/Right Left/Right Left/Right Left/Right N/A Table A3 ­ Delay Setting Defaults Speaker Position Front Left Center Front Right Surround Right Surround Left Subwoofer A/V Sync Delay Distance From Speaker to Listening Position 10 Feet 10 Feet 10 Feet 10 Feet 10 Feet 10 Feet 0mS Your Delay Settings AVR 245 WORKSHEETS Table A4 ­ Source Input Settings Source Title Video Input Component Video Input Audio Input Auto Poll Surround Mode The Bridge/DMP --Tuner --6-Channel --DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP CD Tape Tuner Int. Tuner 6-/8-Channel XM Table A5 ­ Speaker/Channel Settings Source Bass Manager: Global/Independent Left/Right Speaker Size Center Speaker Size Surround Speaker Size Subwoofer Left/Right Speaker Crossover Center Speaker Crossover Surround Speaker Crossover Subwoofer Crossover Left/Right Channel Level Center Channel Level Surround Channel Level Subwoofer Channel Level DVD HDMI 1 HDMI 2 Video 1 Video 2 Video 3 Video 4 The Bridge/DMP CD Tape Tuner 6-/8-Channel XM N/A N/A N/A N/A N/A N/A N/A N/A N/A The 6-/8-Channel Inputs are "direct" inputs, meaning their signals are passed directly to the volume control without any bass management processing. Thus, the speaker sizes are always full range, and it isn't possible to adjust speaker size or crossover. Note: Channel levels vary by surround mode rather than source input. AVR 245 WORKSHEETS Table A6 ­ Remote Control Codes Source Input Video 1 Video 2 Video 3 Video 4 DVD CD Tape HDMI 1 HDMI 2 DVD CD, CDR Cassette Product Type (circle one or fill in) VCR, PVR Cable, Satellite TV Remote Control Code Table A7 ­ System Settings Feature VFD Fade Time-Out Volume Default Default Vol Set Semi-OSD Time-Out Full-OSD Time-Out Default Surr Mode OSD Background Default Setting Off Off ­25dB 5 Seconds 20 Seconds On Blue Your Setting ...