5HSDFNLQJWKH 3ULQWHU 5HSDFNLQJWKH3ULQWHU If you need to relocate or ship your QMS 2425/2425 TURBO Print System after it has been installed, you must follow the procedures in this section to prevent damage to the printer and to keep your warranty valid. v Caution: QMS cannot be held responsible for damage to your printer during shipment that results from the improper packaging of your printer. You must use the instructions given in this section before repacking the printer in its original shipping box with the original packing materials. If you need replacement packaging, in the US call QMS National Service at 1 (334) 633-4300 x 2530. If you need to return the printer for service, in the US call QMS Customer Service at 1 (334) 633-1072 for an RMA (Return Merchandise Authorization) number before shipping the printer. In other countries, refer to appendix A, "QMS Customer Support." 5HPRYH&DEOHVDQG&DVVHWWHV 1 2 3 4 5 » Turn off the printer. Remove the power cable and all interface cables. Remove the paper cassette(s) from the printer. Remove the paper from the cassette(s). Repack the cassettes in their original shipping boxes for shipping or storage. Note: If you're returning the printer for service, you don't need to return the power cable, interface cables, sheet feeder, output stacker, or cassettes. 406785%23ULQW6\VWHP2SHUDWLRQ 5HSDFNLQJWKH 3ULQWHU 5HPRYHWKH7RQHU&DUWULGJH » Note: The toner cartridge is sensitive to bright light. Do not remove the cartridge from the printer until you're ready to return it to its protective bag. Store the cartridge in an environment that is not subject to extreme heat or humidity, salty air, or corrosive gases, such as aerosols. Keep the toner cartridge away from your computer. The magnets in the cartridge can damage data, particularly on your floppy disks. 1 Lift the top cover as far as it will open. 7RS&RYHU 3ULQWHU&DUH 5HSDFNLQJWKH 3ULQWHU 2 Remove the toner cartridge. While grasping the handle of the toner cartridge, remove the cartridge by pulling it up and then towards you. 3 » Repack the toner cartridge in its original protective aluminum bag and shipping carton. Note: If you're disposing of the toner cartridge, put it in a trash receptacle. Don't dispose of it by burning. 406785%23ULQW6\VWHP2SHUDWLRQ 5HSDFNLQJWKH 3ULQWHU 5HSDFNWKH3ULQWHU 0 WARNING! The printer weighs about 106 lbs (48 kg). Don't lift it by yourself. ACHTUNG! Der Drucker wiegt ca 48 kg; bitte versuchen Sie niemals, das Gerät alleine anzuheben oder zu tragen. 1 Insert the packing material that was originally removed upon installation of the printer. 2 Close the printer's top cover. 3ULQWHU&DUH 5HSDFNLQJWKH 3ULQWHU 3 Lift the latch to pull open the left cover and gently lower it until it stops. /HIW &RYHU 4 Replace the cardboard that was originally removed from the fixing assembly area upon installation of printer. 406785%23ULQW6\VWHP2SHUDWLRQ 5HSDFNLQJWKH 3ULQWHU 5 Replace the two spacers that were removed from the fixing assembly upon installation of the printer, and then close the left cover. 6 7 8 » If you have an optional feeder, remove it from the printer, and then repack it for storage. Put the printer back in its original protective plastic bag. Get someone to help you with this step: Lift the printer back into its original shipping carton. Note: If you're returning the printer for service, you don't need to return the toner, paper cassette(s), sheet feeder, output stacker, power cable, or interface cables. 3ULQWHU&DUH ...