User manual KONICA MINOLTA MAGICOLOR 2430 DL - Supplementary Guide

magicolor DL Series Firmware Updater Guide ® 4138-7795-01A 1760673-001A System Requirements Computer: PC with a Pentium 2, 400 MHz or faster processor (A Pentium 3, 500 MHz or faster processor is recommended.) Operating system: ­ Microsoft Windows XP Home Edition/Professional, Windows Server 2003, Windows 2000, Windows Me, Windows 98SE Available hard disk space: ­ Approximately. 20 MB (printer driver and Status Display) Memory: 128 MB or more Interface: ­ 10Base-T/100Base-TX (IEEE 802.3) Ethernet interface port ­ USB 2.0 or later interface port Compatible printers: magicolor 2430 DL, magicolor 5430 DL, magicolor 5440 DL Printer driver: Must be installed ­ magicolor 2430 DL version 1.7.925.0 or later ­ magicolor 5430 DL version 1.9.126.0 or later ­ magicolor 5440 DL version 1.6.1130 or later System Requirements 1 Starting magicolor DL Series Firmware Updater CAUTION Before starting the firmware updater, make sure that the printer driver is installed. 1 2 3 Download the firmware updater from the Web site, and then decompress it in any folder. Double-click magicolor DL Series Firmware Updater.exe. Select I accept, and then click the OK button. 2 Starting magicolor DL Series Firmware Updater 4 Select the appropriate connection for the environment where the printer is being used. For a network connection: Select Network. p. 3 The firmware updater searches the printers connected to the Local Area Network. For a local (IP) connection: Select Local. p. 8 The firmware updater searches the printers listed in the Printers folder on your computer. For a local (USB) connection: Select Local. p. 13 The firmware updater searches the printers listed in the Printers folder on your computer. For a network connection 1 When using Windows XP Service Pack 2 or later, the following message will appear. Click the Unblock button. Starting magicolor DL Series Firmware Updater 3 2 Select the appropriate printer model, and then click the OK button. A list of printers on the network appears. 3 Select the check box for the printer whose firmware is to be updated, and then click Select/Deselect Firmware in the menu bar. 4 Starting magicolor DL Series Firmware Updater 4 Select the updated firmware file for the printer, and then click the Open button. If one of the following messages appears, an incorrect firmware file was selected. Click the OK or No button, and then select the correct firmware file. Starting magicolor DL Series Firmware Updater 5 5 Click Update Printer Firmware in the menu bar. As an example, the following dialog box shows file version 2.05 selected. 6 Click the OK button. 7 Click the OK button. Updating of the firmware begins. Do not turn off the printer while its firmware is being updated. 6 Starting magicolor DL Series Firmware Updater If the following message appears, click the OK button. 8 9 Reboot your printer. Click Exit in the menu bar 10 Click the OK button to exit the Updater. Starting magicolor DL Series Firmware Updater 7 For a local (IP) connection 1 When using Windows XP Service Pack 2 or later, the following message will appear. Click the Unblock button. 2 From the Printer Selection list, select the printer whose firmware is to be updated. 3 Click the Browse button. 8 Starting magicolor DL Series Firmware Updater 4 Select the updated firmware file for the printer, and then click the Open button. If one of the following messages appears, an incorrect firmware file was selected. Click the OK or No button, and then select the correct firmware file. Starting magicolor DL Series Firmware Updater 9 5 Click the Update Firmware button. 6 Click the OK button. 10 Starting magicolor DL Series Firmware Updater 7 Click the OK button. Updating of the firmware begins. Do not turn off the printer while its firmware is being updated. If the following message appears, click the OK button. 8 Reboot your printer. Starting magicolor DL Series Firmware Updater 11 9 Click the Close button to exit the Updater. 12 Starting magicolor DL Series Firmware Updater For a local (USB) connection 1 From the Printer Selection list, select the printer whose firmware is to be updated. 2 3 Click the Browse button. Select the updated firmware file for the printer, and then click the Open button. Starting magicolor DL Series Firmware Updater 13 If any of the following messages appear, an incorrect firmware file was selected. Click the OK or No button, and then select the correct firmware file. 14 Starting magicolor DL Series Firmware Updater 4 Click the Update Firmware button. 5 Click the OK button. Starting magicolor DL Series Firmware Updater 15 6 Click the OK button. Updating of the firmware begins. Do not turn off the printer while its firmware is being updated. If the following message appears, click the OK button. 7 Reboot your printer. 16 Starting magicolor DL Series Firmware Updater 8 Click the Close button to exit the Updater. Starting magicolor DL Series Firmware Updater 17