User manual ADS TECH PYRO WEB CAM - TECHNICAL SPECIFICATIONS

PYRO Web Cam API-200/203 Technical Specifications: CCD image sensor Optical size Number of effective pixels Interface formats Video modes Frame rate Brightness White balance Focal length Back focal length F# Focus area Angle of view Distortion Image Controls Sony 1/4 inch format 659(h) x 494(v), 640 x 480, 320 x 240, 160 x 120 YUV 4:1:1, 4:2:2, 4:4:4, RGB 24-bit 30 frames/sec. at 640 x 480 format Automatic or manual controlled Manual adjust, or automatic 4.00 mm 3.50 mm 2.0 1.0 cm to infinity 62 degree, diagonal <-12.0 % Brightness, Contrast, Saturation, Sharpness, Gamma, Exposure, White Balance and Backlight compensation Sony CCD Description: The imager is a 1/4-inch optical interline CCD solid-state image sensor with a square pixel array which supports VGA format. Progressive scan allows all pixel signals to be output independently within approximately 1/30 second. This chip features an electronic shutter with variable chargestorage time, which makes it possible to realize full-frame still image without a mechanical shutter. High resolution and high color reproductivity are achieved through the use of R, G, B primary color mosaic filters. Further, high sensitivity and low dark current are achieved through the adoption of HAD (Hole-Accumulation Diode) sensors. Features: · High horizontal and vertical resolution (both approx. 400TV-lines) still image without a mechanical shutter. · Square pixel · Supports VGA format · Horizontal drive frequency: 12.27MHz · R, G, B primary color mosaic filters on chip · High resolution, high color reproductivity, high sensitivity, low dark current · Continuous variable-speed shutter · Low smear