Introduction of the Owner's Manual Page 1 of 1 [Table of Contents] [Next Page] SPECIFICATIONS WIDTH 62.5 in DEPTH 59 in HEIGHT 72 in WEIGHT Approx. 475 kg. (1200 Ibs.) POWER, MAXIMUM CURRENT 900W 7.5A (AC 120V 60 Hz AREA) 25 INCH MEDIUM RESOLUTION MONITOR COLOR MONITOR X 2 NOTE: Descriptions in this manual are subject to change without prior notice. INTRODUCTION OF THE OWNER'S MANUAL SEGA ENTERPRISES, LTD., supported by its high electronic technology of LSI's, microprocessors, etc. and a wealth of experience, has for more than 30 years been supplying various innovative and popular game machines to the world market. This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards DAYTONA USA TWIN TYPE, a new SEGA product. This manual is intended for those who have knowledge of electricity and technical expertise especially in ICs, CRTs, microprocessors, etc. Carefully read this manual to acquire sufficient knowledge before working on the machine. Should there be a malfunction, nontechnical personnel should under no circumstances touch the interior system. Should such a case arise, contact our Main Office or the closest branch office listed as follows: SEGA ENTERPRISES, INC. (U.S.A.) / CUSTOMER SERVICE 45133 Industrial Drive, Fremont, California 94538, U.S.A. Phone: (650) 632-7500 Fax: (650) 632-7594 http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT02.html 7/8/2005 Daytona USA Twin Owner's Manual Page 1 of 2 DAYTONA USA TWIN TABLE OF CONTENTS Introduction of the Owner's Manual 2 1. Handling Precautions 3 2. Prevention of Counterfeiting and Conversion 4 3. Precautions Concerning Installation Location 5 4. Name of Parts 6 5. Accessories 7 6. Moving the Machine 8 7. Assembling the Machine 9 7-1 Assembling Your Daytona USA Twin Game 9 7-2 Billboard Installation 13 7-3 Securing to the Installation Position (Leg Adjuster Adjustment) 14 7-4 Power Supply and Earth Connection 15 7-5 Turning the Power On 15 7-6 Assembly Check 16 7-7 How to Play 18 8. Explanation of Test and Data Display 20 8-1 Switch Unit 21 8-2 Test Mode 22 8-3 Bookeeping 23 8-4 Game System 25 8-5 Coin Assignment 26 8-6 Input Test 28 8-7 Output Test 29 8-8 Drive DB Test 30 8-9 Sound Test 32 8-10 TGP Test 33 8-11 Memory Test 33 8-12 Backup RAM Clear 34 9. Control Panel (Handle Mecha) 35 10. Accelerator & Brake 37 11. 4 Speed Shifter 38 12. Coin Selector 41 13. Monitor Adjustments 42 14. Replacing the Fluorescent Lamp, and Lamps 43 15. Periodic Check 43 16. Troubleshooting 44 17. Game Board 46 http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT01.html 7/8/2005 Daytona USA Twin Owner's Manual Page 2 of 2 18. Communication Play 19. Design Related Parts 20. Parts List ASSY BILLBOARD ASSY CONT PNL TWIN (DYN-12001) ASSY HANDLE MECHA (DYN-1250) ASSY VIRTUAL BUTTON TWIN (DYN-1290) ASSY SEAT TWIN SEAT WOOFER SPEAKER ASSEMBLY LEFT & RIGHT ASSY 4 SPEED SHIFTER (DYN1-2150) ASSY ACCEL & BRAKE (DYN-1300) ASSY BASE BOX 21. Wire Color Code Table 22. Wiring Diagram 48 52 54 57 58 60 63 64 65 66 67 69 71 72 72 http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT01.html 7/8/2005 Accessories Page 1 of 1 [Table of Contents] [Previous Page] [Next Page] 5. ACCESSORIES When transporting the machine, make sure that the following ports are supplied. TABLE 5 ACCESSORIES QTY. PART NAME 2 KEY 1 OWNERS MANUAL DAYTONA TWIN 1 500 CM OPTO CABLE 1 T15 TAMPER PROOF WRENCH 1 T20 TAMPER PROOF WRENCH 1 T25 TAMPER PROOF WRENCH 1 T27 TAMPER PROOF WRENCH 1 SEAT LABELS 3-8 http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT07.html 7/8/2005 Name of Parts Page 1 of 1 [Table of Contents] [Previous Page] [Next Page] 4. NAME OF PARTS http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT06.html 7/8/2005 Precautions Concerning Installation Location Page 1 of 1 [Table of Contents] [Previous Page] [Next Page] 3. PRECAUTIONS CONCERNING INSTALLATION LOCATION The DAYTONA USA TWIN TYPE is an indoor game machine. Absolutely do not install it outside. Even indoors, avoid installing in places mentioned below so as to ensure proper usage: Places subject to rain or water leakage, or condensation due to humidity. In the proximity of an indoor swimming pool and/or shower. Places subject to direct sunlight. Places subject to heat sources from heating units, etc., or hot air. Vicinity of highly inflammable/volatile chemicals or hazardous matter. Sloped surfaces. Vicinity of anti-disaster facilities such as fire exits and fire extinguishers. Places subject to any type of violent impact. Dusty places. INSTALLATION PRECAUTIONS 1) Do not insert more than one electrical plug into the power plug socket. 2) The per unit standard voltage/amperage is 100~120V/15A. 3) Use of extension cables should be avoided. If you must use, ensure the extension cables are rated at 15A or higher for 100~120 volt areas or 10A. 4) Note that for transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc.) are 36 in (W) and 80 in (H). 5) For the operation of this machine, secure a minimum area of 80 in (W) x 70 in (D). ELECTRIC CURRENT CONSUMPTION MAX. 7.5 A (AC 120V 60HZ) http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT05.html 7/8/2005 Handling Precautions Page 1 of 1 [Table of Contents] [Previous Page] [Next Page] 1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Be sure to turn the power off before working on the machine. To insert or pull out the plug quickly is dangerous. It is necessary to make sure that the power cord or the grounding wire is not exposed on the road, etc. in a manner so as to be dangerous. Make sure that grounding connections are made safely at the position where so specified. Do not use any fuse that does not meet specified rating. Make complete connections for the IC board and other connectors. Insufficient insertion is very dangerous. The operating (ambient) temperature range is from 5°C to 40°C. When cleaning the CRT surfaces, use a soft, dry cloth. Do not apply chemicals such as thinner, benzene, etc. Also, for the IC board circuit inspections, only the logic tester is allowed. The use of a tester is not permitted, so be careful in this regard. After confirming that there are no irregularities, turn the power ON. http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT03.html 7/8/2005 Prevention of Counterfeiting and Conversion Page 1 of 1 [Table of Contents] [Previous Page] [Next Page] 2. PREVENTION OF COUNTERFEITING AND CONVERSION LABELING To prevent counterfeits and conversions, the following labels are put on all SEGA products. When handling such goods, be sure to confirm the labels. They are used to prevent illegal acts such as the unauthorized copying of the products and the printed circuit boards thereof or carrying on business by manufacturing similar merchandise or by converting, selling or using such products or printed circuit boards. ORIGINAL SEAL: The left seal is put on the machines manufactured by SEGA. LICENSE SEAL: The right seal is put on all SEGA kits, such as the printed circuit board. COPYRIGHT NOTICE This SEGA product has the copyright notice as follows: (C) SEGA 1994 This signifies that this work was disclosed in 1994 and is the property of SEGA ENTERPRISES, LTD. http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT04.html 7/8/2005 Moving the Machine Page 1 of 2 [Table of Contents] [Previous Page] [Next Page] 6. PRECAUTIONS TO BE HEEDED WHEN ASSEMBLING AND MOVING THE MACHINE WARNING: 1. Perform the assembly work by following the procedure herein stated. Failing to comply with the instructions, for example, inserting the plug into an outlet at the stage not mentioned in this manual might cause an electric shock accident. 2. Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling may cause damage to the machine, or malfunctioning to occur. 3. When assembling, be sure to perform the work by plural persons. When carrying out the assembly work, follow the procedure in the following sequence: ASSEMBLING THE COCKPIT INSTALLING THE BILLBOARD SECURING IN PLACE (LEG ADJUSTER ADJUSTMENT) INSTALLING THE AC COVERS (WIRING CONNECTION) POWER SUPPLY, AND EARTH CONNECTION TURNING THE POWER ON ASSEMBLING CHECK Note that the master key and the cashbox door key (accessories) in addition to the tools such as a plus screwdriver, wrench for M16 hexagon bolt and socket wrench are required for the assembly work. CAUTION: Perform the tightening of hexagon bolts described above after adjusting the leg adjusters. Make sure that until the leg adjuster adjustments are made, keep the hexagon bolts tightened temporarily. http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT08.html 7/8/2005 Moving the Machine Page 2 of 2 http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT08.html 7/8/2005 Assembling Your Game Page 1 of 1 [Table of Contents] [Previous Page] [Next Page] 7. ASSEMBLING THE MACHINE (1) ASSEMBLING YOUR DAYTONA USA TWIN GAME To assemble your Daytona driving game locate the Left cabinet (side with on/off switch), Cash Box Tower, and Right side cabinet. In the parts bag located in the cash box locate the Opto cable. This will be needed later, to connect together the opto connections on the rear of Cash Box Tower. The hardware needed to assemble your Daytona driving game has game threaded into the proper holes. This was done to insure the bolts thread properly into the T nuts in the cabinet. At this time remove the rear cover of the Cash Box Tower. Notice the wire harness taped to the sides of the cabinets and Cash Box Tower. On the wire harness connections Black is for Left side, Yellow is for Right side viewed from front. Locate Left side cabinet (on/off switch) and Cash Box Tower. (Fig 6.1A). Connect the 15, 4, and 2 position connectors together. At this time connect the Opto cable (without white label) to the Opto connection nearest to the Left side of cabinet (viewed from front). These Opto connections are in the rear of the Cash Box Tower. You may elect not connect the connector at this time, but carefully push the connectors in the hole so they are still accessible form the outside of the cabinet. There are 4 bolts in NON SLOTTED holes, on the side of the cabinet, the 2 on top under the ledge must be removed. The 2 on the bottom must be loosened about a 1/4 inch. Lift up the Cash Box Tower and using the 2 lower slotted holes on the bottom of the cash box slip them over the lower protruding bolts and slide the cash box into place. Open the coin door and install the 2 upper bolts through the cash box into the cabinet. Tightened all 4 bolts. The Right side cabinet gets installed the same way as left side (Fig. 6.1B). Don't forget to connect all the connectors described above. The opto cables with the white labels get connected together inside the rear Cash Box Tower. The 2 remaining opto cables get connected to the 2 external opto connectors on the rear of the Cash Box Tower. This is used for linking 2 or more games (Fig. 6.1C). Replace the Cash Box Tower rear cover. http://www.sauservice.com/manuals/Daytona%20Folder/DThtml/DT09.html 7/8/2005 Assembling Your Game Page 1 of 1 [Table of Contents] [Previous Page] [Next Page] 7. ASSEMBLING THE MACHINE (1) ASSEMBLING YOUR DAYTONA USA TWIN GAME To assemble your Daytona driving game locate the Left cabinet (side with on/off switch), Cash Box Tower, and Right side cabinet. In the parts bag located in the cash box locate the Opto cable. This will be needed later, to connect together the opto connections on the rear of Cash Box Tower. The hardware needed to assemble your Daytona driving game has game threaded into the proper holes. This was done to insure the bolts thread properly into the T nuts in the cabinet. At this time remove the rear cover of the Cash Box Tower. Notice the wire harness taped to the sides of the cabinets and Cash Box Tower. On the wire harness connections Black is for Left side, Yellow is for Right side viewed from front. Locate Left side cabinet (on/off switch) and Cash Box Tower. (Fig 6.1A). Connect the 15, 4, and 2 position connectors together. At this time connect the Opto cable (without white label) to the Opto connection nearest to the Left side of cabinet (viewed from front). These Opto connections are in the rear of the Cash Box Tower. You may elect not connect the connector at this time, but carefully push the connectors in the hole so they are still accessible form the outside of the cabinet. There are 4 bolts in NON SLOTTED holes, on the side of the cabinet, the 2 on top under the ledge must be removed. The 2 on the bottom must b ...