User manual SONY ERICSSON K700I - USING THE AS A MODEM

G s etting tarted August 2004 Using the K700 as a modem Getting started Using the K700 as a modem Using the K700 as a modem Your phone has a built-in modem. You can use it to connect a PC or a PDA to your Internet Service Provider (ISP) to browse the Internet or manage your e-mail messages. The instructions in this document focus on how to set up a PC running Microsoft® Windows® 2000 or XP to use a GPRS connection. Before you set up your computer and start using the modem, make sure you have the following: · GSM phone subscription that supports GPRS or High Speed Data. · Data account (WAP settings) set up in your phone. See the K700 User Guide and your GSM operator's subscription information for details. You can also use the Phone Setup on www.SonyEricsson.com/ support to have all necessary settings sent to your phone in a text message (SMS). To use your phone as a PC modem to connect to the Internet, you need to perform the following steps: · Install the Mobile Networking Wizard software from the CD that comes with your phone. You can also download the Mobile Networking Wizard software from www.SonyEricsson.com/support. · Set up the Sony Ericsson K700 modem for use with Infrared, BluetoothTM wireless technology, USB cable, or RS232 serial cable. · Create a GPRS dial-up connection to your Internet service provider. Installing Mobile Networking Wizard with Mobile Phone Monitor The Mobile Networking Wizard software can be downloaded from www.SonyEricsson.com/support. The software can be installed on a PC running Windows ME, 2000 or XP. To download the latest version of the Mobile Networking Wizard 1. In your Internet browser, go to www.SonyEricsson.com/support. 2. Select a region and country or "Global support area". 3. Enter the product name: K700. 4. Select Software/Applications and follow the Mobile Networking Wizard download instructions on the page. To install the Mobile Networking Wizard software 1. Double-click on the downloaded Mobile Networking Wizard file. 2. If the installation does not start automatically, click Start/Run.../Browse and select the Start program (MobileNetworkingWizard_version.exe) on the file. Click OK to start the program. 3. When the installation has started, select the language you prefer, and click OK. 4. Click Install. The "Mobile Networking Wizard - InstallShield Wizard" opens. 5. Follow the wizard instructions to install Mobile Networking Wizard with Mobile Phone Monitor. 6. In the final wizard window, click Finish to complete the installation. Note: The first time you start Mobile Networking Wizard, the Mobile Phone Monitor phone connection wizard starts to identify the phone model and capabilities. Enter information, click on "Next" and "Finish". 2 August 2004 Getting started Using the K700 as a modem Setting up the infrared modem When the phone and a PC running Windows 2000 or XP are first connected via infrared, a generic modem driver is automatically installed. You will only need to check the modem properties and install the Sony Ericsson modem driver. The infrared device in the PC must be installed (see the manufacturer's product documentation) and working properly before you start the installation procedures below. Note: The procedures, terms, application names, and so on, may be slightly different depending on the brand and model of the infrared device in the PC. In such cases, refer to the manufacturer's product documentation. 1. PC: If you have previously used another phone as a modem in the PC, remove its driver from Windows before you continue. To remove an installed modem driver, click Start/Settings/Control Panel, doubleclick the Phone and Modem Options icon, and select the Modems tab. Select the modem to remove in the list, click Remove, and follow the instructions on the screen. 2. K700: to turn on the infrared port in your phone, } Connectivity } Infrared port } Turn on. The Infrared icon appears on the phone's screen. 3. Place the phone in front of the PC's infrared port. The distance should be less than 20 cm and the angle less than 30 degrees. 4. Wait for the phone and PC to connect. This can take 30 seconds or more. When connected, the infrared icon appears in the taskbar (near the clock, at the bottom of the PC screen). 5. PC: click Start/Settings/Control Panel, double-click the Phone and Modem Options icon, and select the Modems tab. If Sony Ericsson K700 IrDA modem is in the list of modems, proceed to step 12. 6. Normally a Standard modem over IR link has been automatically installed. Select it in the list and click Properties. If no infrared modem has been installed, exit the Control Panel, restart the computer and start this setup sequence from the beginning. 7. Select the Driver tab and click Update Driver... The "Hardware Update Wizard" starts. 8. Select the option Install from a list or specific location and click Next. 9. Select the option Don't search. I will choose the driver to install and click Next. 10. Select Sony Ericsson Mobile Communications in the Manufacturers list and Sony Ericsson K700 IrDA modem in the Models list and click Next. 11. The modem driver is updated. Click Finish. 12. Select Sony Ericsson K700 IrDA modem in the list and click Properties. 13. Select the Modem tab and check that Maximum Port Speed is set to 115200. 14. Select the Diagnostics tab and click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem are displayed. If an error message is displayed, such as "The modem failed to respond...", exit all dialogs and the Control Panel. For further instructions, see the troubleshooting section below. 15. To finish the Internet setup, please follow the instructions in the "Creating a GPRS dial-up connection..." section below. 3 August 2004 Getting started Using the K700 as a modem Setting up the BluetoothTM modem To connect your phone to a PC using BluetoothTM wireless technology you first need to add your PC to your phone's list of Bluetooth devices. This procedure may be called pairing or bonding in other product documentation. When the PC is added to the list of Bluetooth devices in the phone, the computer and phone automatically connect when they are within about 10 m range and the phone's Bluetooth function is turned on. The Bluetooth device in the PC must be installed (see the manufacturer's product documentation) and working properly before you start the installation procedures below. Note: The procedures, terms, application names, and so on, may be slightly different depending on the brand and model of the Bluetooth device in the PC. In such cases, refer to the manufacturer's product documentation. To use dial-up networking via Bluetooth wireless technology, Bluetooth has to be turned on. } Connectivity } Bluetooth } Turn on. To add the PC to the phone's list of Bluetooth devices (also known as pairing or bonding) 1. K700: } Connectivity } Bluetooth } Options } Phone name. Enter a name that identifies your phone uniquely to other Bluetooth devices. 2. } Connectivity } Bluetooth } Options } Visibility } Show phone. 3. } Connectivity } Bluetooth } Turn on. The Bluetooth icon is shown on the phone's screen. 4. PC: open the Bluetooth software and search for Bluetooth devices. One icon appears for each Bluetooth device found. 5. Right-click the icon with your phone's name. In the menu that pops up, select the menu item for pairing/bonding. 6. In the dialog you enter a code, which will be the "password" for the phone to get access to the Bluetooth services in the computer. Click OK. A dialog appears in your phone after a couple of seconds. Note: Make sure to enter a code that is secure, that is, not available to anyone but yourself. 7. K700: In a dialog you are asked if you want to add the computer to "My devices". } Yes. 8. Enter the code you entered in step 6 above and } OK. If the dialog in step 6 above did not ask for a code, enter 0000. 9. PC: The phone icon should now be marked, for example with a check mark in a check box, to show that the phone now can be automatically recognized when Bluetooth is turned on and the phone and the computer are within range. To set up the K700 Bluetooth modem in the PC 1. Click Start/Settings/Control Panel, and double-click the Phone Monitor Options icon. 2. Select the COM Ports tab. 3. Select all disabled COM ports in the list one by one and click Enable for each of them. All COM ports with a number greater than 2 can be used for the modem. Make a note of the numbers of all enabled COM ports! Note: If there are no COM ports with a number greater than 2 in the list, you probably need to activate a COM port for the Bluetooth device in the PC. Please refer to the Bluetooth device manufacturer's documentation for instructions. 4. Exit to the Control Panel window. Double-click the Phone and Modem Options icon. 4 August 2004 Getting started Using the K700 as a modem 5. Select the Modems tab. · If the "Sony Ericsson K700 Bluetooth modem" is in the list of modems, proceed to step 10. · If a Bluetooth modem other than the "Sony Ericsson K700 Bluetooth modem" is in the list, the modem driver should be updated. Select the modem in the list, click Properties, select the Driver tab, and click Update Driver... In the first dialog, select the option Install from a list or specific location. · If no Bluetooth modem is installed, click Add. The "Add Hardware Wizard" starts. In the first dialog, select the option Don't detect my modem. I will select it from a list. Proceed to step 7. 6. Select the option Don't search. I will choose the driver to install. 7. First select Sony Ericsson Mobile Communications in the Manufacturers list, then Sony Ericsson K700 Bluetooth modem in the Models list, and click Next. 8. In the "Add Hardware Wizard", select the COM port for the Bluetooth connection (a port with a number greater than 2). 9. The modem driver is installed. Click Finish in the final wizard window. 10. Select the Sony Ericsson K700 Bluetooth modem, and click Properties. 11. Select the Modem tab and check that Maximum Port Speed is set to 115200. 12. Select the Diagnostics tab and click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem are displayed. If an error message is displayed, such as "The modem failed to respond...", exit all dialogs and the Control Panel. For further instructions, see "Troubleshooting the Bluetooth modem" on page 10. 13. To finish the Internet setup, please follow the instructions in the "Creating a GPRS dial-up connection..." section below. Setting up the USB cable modem The Sony Ericsson USB cable DCU-11 or DCU-10 can be used to connect a PC to your phone and use the phone as a modem. This guide describes how to use the DCU-11 cable, but is useful also for the DCU-10. For the first step in the setup procedure, installing the cable, you need access to the software driver for the cable. You find it on the CD that came with your cable or on the CD that came with your phone. You can also download the driver from www.SonyEricsson.com/support. To download the software driver for your cable 1. In your Internet browser, go to www.SonyEricsson.com/support. 2. Select a region and country or "Global support area". 3. Enter the product name: USB Cable DCU-11. Select Software/Drivers and scripts and follow the download instructions on the page. 4. Use the Windows explorer to locate the downloaded file and extract its contents. Make a note of the location of the extracted files. To install the cable software drivers Note: Do not connect the phone to the cable yet. 1. If available, insert the CD that came with your cable or with your phone. 2. Connect the USB cable to a USB port on the PC. 3. With the CD inserted, the installation should go automatically without any information on the screen. Proceed to step 11 to verify that the cable has been installed. 5 August 2004 Getting started Using the K700 as a modem 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Select the option Install from a list or specific location and click Next. Select the option Don't search, I will choose the driver to install and click Next. Click Have Disk... Click Browse... · To install from the CD that came with your phone, browse to the "Drivers/DCU-11" directory on the CD and select the file "SUSCOM.INF". · To install a driver that you downloaded, browse to the directory where you extracted the downloaded file, and find the directory "SUSTEEN_x.x.x.x_x/2K_XP" (x.x.x.x_a is the driver's version number, for example 1.6.0.2_d) and select the file "SUSCOM.INF". Click Open and OK. Select "USB Cable DCU-11" in the Models list, and click Next. Click Finish in the final wizard window. Steps 11 to 17 are to verify the installation and check which COM port is used for the USB cable: Click Start/Settings/Control Panel and double-click the System icon. Select the Hardware tab and click Device Manager. The USB cable can be found under Ports. Make a note of the cable's COM port number (shown within parenthesis). Exit to the Control Panel window and double-click the Phone Monitor Options icon. Select the Com Ports tab. Select the COM port installed for the USB cable and click Enable. Click OK. To set up the K700 modem in the PC 1. Connect the USB cable to the phone. 2. Click Start/Settings/Control Panel, and double-click the Phone and Modem Options icon. 3. Select the Modems tab. · If the "Sony Ericsson K700 Serial Modem" is in the list of modems, proceed to step 9. · If a Serial modem other than the "Sony Ericsson K700 Serial Modem" is in the list, the modem driver should be updated. Select the modem in the list, click Properties, select the Driver tab, and click Update Driver... In the first dialog, select the option Install from a list or specific location. · If no serial modem is installed, click Add. The "Add Hardware Wizard" starts. In the first dialog, select the option Don't detect my modem. I will select it from a list. Proceed to step 5. 4. Select the option Don't search. I will choose the driver to install and click Next. 5. First select Sony Ericsson Mobile Communications in the Manufacturers list, then Sony Ericsson K700 Serial Modem in the Models list, and click Next. 6. In the "Add Hardware Wizard", select the COM port for the USB cable. 7. The modem driver is installed. Click Finish in the final wizard window. 8. Select the Sony Ericsson K700 Serial Modem and click Properties. 9. Select the Modem tab and check that Maximum port speed is set to 115200. 10. Select the Diagnostics tab and click Query modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem are displayed. If an error message is displayed, such as "The modem failed to respond...", exit all dialogs and the Control Panel. For further instructions, see the troubleshooting section below. 11. To finish the Internet setup, please follow the instructions in the "Creating a GPRS dial-up connection..." section below. 6 August 2004 Getting started Using the K700 as a modem Setting up the RS-232 serial cable modem The Sony Ericsson RS-232 cable DRS-11 can be used to connect a PC to your phone and use the phone as a modem. To set up the K700 modem in the PC 1. Connect the DRS-11 cable to the phone and to a COM port on the PC. 2. If the "Found New Hardware Wizard" does not start automatically, restart the PC, and the wizard starts automatically. 3. Select the option "Install the software automatically" and click Next. 4. A list of modems appears in the dialog. Select Sony Ericsson K700 Serial Modem in the list and click Next. 5. The modem driver is installed. Click Finish in the final wizard window. 6. Click Start/Settings/Control Panel and double-click the Phone and Modem Options icon. 7. Select the Modems tab. 8. Select the Sony Ericsson K700 Serial Modem, and click Properties. 9. Select the Modem tab and check that Maximum Port Speed is set to 115200. 10. Select the Diagnostics tab and click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem are displayed. 11. To finish the Internet setup, please follow the instructions in the "Creating a GPRS dial-up connection..." section below. Creating a GPRS dial-up connection to your Internet service provider You have to create a new dial-up connection and configure it, to be able to connect to the Internet via GPRS. First make sure you have the correct WAP settings in the phone. If you can't access the Internet from the phone, contact your Service Provider or use the Phone Setup on www.sonyericsson.com/ support to get the required settings. To create a new GPRS dial-up connection 1. Click Start/Programs/Sony Ericsson/Mobile Networking Wizard. 2. The phone connection wizard opens and searches for your phone. This takes up to 30 seconds. You are asked to enter a name for your phone (default My K700) and for your SIM card (default My SIM). You should enter names that clearly identify your phone and SIM card, especially if you intend to use different phones or different accounts for Internet connections. If more phones are connected, wait until the wizard has finished searching. 3. Click on the button next to GPRS / UMTS packet data. 4. A list shows the different types of modems supported by your phone. It can take a few seconds to update the list. Select the modem you have installed and want to use for the connection, and click Next. 5. Enter a name for the connection. The name should clearly identify the connection if you intend to set up more than one in the computer. Click Next. 6. Select the option "Use settings from an existing entry in your phone", and select an account from the dropdown list. Click the "..." button if you want the wizard to refresh the account information from the phone. Click Next. 7 August 2004 Getting started Using the K700 as a modem 7. In the following two screens, enter DNS information, User name, Password and Domain name according to information from your service provider. If you do not know the settings, leave them blank. 8. The final window in the setup wizard shows your settings. Click Finish to test the created connection. 9. Select the icon of the created connection and click Connect. 10. Click Dial. 11. If the connection succeeds, a network icon appears in the taskbar. Right-click the icon to see the status of the connection or disconnect. If the connection did not succeed, go back to step 6 above and check that you selected the correct account and repeat steps 7 to 10. 12. Finally, you should set up your Internet browser to use the created connection. Refer to your browser's documentation. Normally, you should set up your browser only to dial-up the GPRS connecton if no other connection is available, and disconnect automatically when closing the browser. Troubleshooting The troubleshooting guides below refer to problems arising during setup procedures, but can also be useful for solving problems ocurring after a successful installation. Most often problems using the phone as a modem relate to one of the following issues: · The computer and the phone do not connect properly. Find the solution to this kind of problem in the section for the connection type that you use, see "Troubleshooting the infrared modem" on page 9, "Troubleshooting the Bluetooth modem" on page 10 or "Troubleshooting the serial modem (USB or RS232 cable)" on page 11. · The phone modem is properly connected but does not respond to commands. Some solutions can be found in "General troubleshooting" on page 8, others in the sections for the different connection types. General troubleshooting Here you find some general actions to take if you are having trouble with the modem setup or GPRS connections. If you have previously used another phone as a modem: · Remove all software installed in the computer for communication between the computer and the other phone. For example many Sony Ericsson phones use the XTNDConnect software (Sony Ericsson Communication Suite), which should be removed before installing the Mobile Networking Wizard software that comes with the K700. Do not remove software used for Bluetooth or infrared devices, if they work properly. Restart the computer after removing the software. · Install (or reinstall) the Mobile Networking Wizard software for K700 before you start the installation of the K700 as a modem. · Remove phones and SIM cards that are not used in the "Phone Monitor Options". 8 August 2004 Getting started Using the K700 as a modem Troubleshooting the infrared modem If you have problems installing or using the infrared modem, this section gives you some hints on how to correct the problems. · The first action to take if the computer fails to connect to your GPRS network via the infrared modem is to check the connection between the computer and the modem and if the modem is responding. See "To check the infrared connection and modem" on page 9. · In some computers, the COM ports are designed for higher connection speeds than the modem is, which can cause connection problems. To avoid problems, the COM port speed should not be higher than 115200 bps. See "To set the COM port speed" on page 9. To check the infrared connection and modem 1. Check that the infrared port is turned on in the phone and that the phone is aligned with the computer's infrared port. You should see one icon on the phone's screen and one in the PC's taskbar. 2. PC: Open Phone and Modem Options/Modems in the Control Panel. Check that the "Sony Ericsson K700 IrDA Modem" is installed and attached to a COM port. · If the modem is not installed or installed but marked "Not present", restart the computer. Keep the phone aligned with the PC's infrared port and do not turn off the phone's infrared port. · If an infrared modem other than the "Sony Ericsson K700 IrDA Modem" is in the list and attached to a COM port, you should update the driver for the modem. See "To update the modem driver" below. 3. Select the modem in the list, click Properties and select the Diagnostics tab. 4. Click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem should be displayed. To update the modem driver 1. In Control Panel/Phone and Modem options/Modems, select the modem you want to update, click Properties and select the Driver tab. 2. Click Update Driver... The "Hardware Update Wizard" starts. 3. Select the option Install from a list or specific location and click Next. 4. Select the option Don't search. I will choose the driver to install and click Next. 5. Select Sony Ericsson Mobile Communications in the Manufacturers list and Sony Ericsson K700 IrDA modem in the Models list and click Next. 6. The modem driver is updated. Click Finish. To reserve a COM port for the infrared modem 1. Find which COM port is used for the infrared modem in Control Panel/Phone and Modem Options/ Modems and make a note of the port number. 2. Open the Control Panel/Phone Monitor Options and select the COM Ports tab. 3. Select the COM port you found in step 1 above and click Reserve. Note: If you have Windows XP, Service pack 1 or later or Windows 2000, Service pack 3 or later, the COM port is set to "Disabled". Don't try to change this setting! These Windows Service packs use a special driver (IRCOMM) for infrared communication, and enabling the COM port will disable this driver. To set the COM port speed 1. Open the Control Panel/Phone and Modem Options/Modems, select the Sony Ericsson K700 IrDA Modem and click Properties. 2. Select the Modem tab and set the Maximum Port Speed to no higher than 115200 in the drop-down list. 9 August 2004 Getting started Using the K700 as a modem Troubleshooting the Bluetooth modem If you have problems installing or using the Bluetooth modem, this section gives you some hints on how to correct the problems. · If the pairing/bonding fails during installation, see "To solve pairing/bonding problems" on page 10. · If you have problems installing the modem after a successful pairing/bonding, see "To solve Bluetooth modem installation problems" on page 10. · The first action to take if the computer fails to connect to your GPRS network via the Bluetooth modem is to check the connection between the computer and the modem and if the modem is responding. See "To check the Bluetooth connection and modem" on page 10. · In some computers, the COM ports are designed for higher connection speeds than the modem is, which can cause connection problems. To avoid problems, the COM port speed should not be higher than 115200 bps. See "To set the COM port speed" on page 11. To solve pairing/bonding problems 1. During the pairing/bonding procedure, place the phone as close as possible (less than 1 m) to the computer's Bluetooth device. 2. K700: Make sure that Bluetooth is turned on and set to "visible". } Connectivity } Bluetooth } Turn on and } Connectivity } Bluetooth } Options } Visibility } Show phone. 3. Follow the instructions on page 4 carefully to complete the pairing/bonding procedure. To solve Bluetooth modem installation problems 1. In some Bluetooth PC installations, you must activate a COM port manually. This is done differently for different brands and models of Bluetooth devices. Refer to the manufacturer's product documentation for details. In many cases you can right-click your phone's icon in the window where all found Bluetooth devices are shown, and select a "COM port activation" item in the popup menu. Make a note of the COM port number of the activated port. 2. In Control Panel/Phone Monitor Options/Com Ports, enable the COM port you activated in step 1. 3. Keep Bluetooth turned on in your phone and restart the computer. The phone modem should now be automatically installed. Follow the instructions: "To set up the K700 Bluetooth modem in the PC" on page 4 carefully to complete the modem installation. To check the Bluetooth connection and modem 1. Check that Bluetooth is turned on in the phone. You should see one icon on the phone's screen and the Bluetooth icon in the PC's taskbar should show that the connection is active (see your Bluetooth device manufacturer's product documentation for details). 2. PC: Open the Control Panel/Phone and Modem Options/Modems. Check that the "Sony Ericsson K700 Bluetooth Modem" is installed and attached to a COM port. · If the modem is not installed or installed but marked "Not present", restart the computer. Keep the phone's Bluetooth turned on during the restart. · If a Bluetooth modem other than the "Sony Ericsson K700 Bluetooth Modem" is in the list and attached to the COM port assigned for your K700 modem, you should update the driver for the modem. See To update the modem driver. 3. Select the modem in the list and click Properties/Diagnostics. 4. Click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem should be displayed. To update the modem driver 1. In the Control Panel/Phone and Modem options/Modems, select the modem you want to update, click Properties and select the Driver tab. 2. Click Update Driver... The "Hardware Update Wizard" starts. 3. Select the option Install from a list or specific location and click Next. 4. Select the option Don't search. I will choose the driver to install and click Next. 10 August 2004 Getting started Using the K700 as a modem 5. Select Sony Ericsson Mobile Communications in the Manufacturers list and Sony Ericsson K700 Bluetooth modem in the Models list and click Next. 6. The modem driver is updated. Click Finish. To set the COM port speed 1. Open the Control Panel/Phone and Modem Options/Modems, select the Sony Ericsson K700 Bluetooth Modem and click Properties. 2. Select the Modem tab and set the Maximum Port Speed to no higher than 115200 in the drop-down list. Troubleshooting the serial modem (USB or RS232 cable) If you have problems installing or using the serial modem, this section gives you some hints on how to correct the problems. · If modem installation fails, most often the problem relates to the cable connection settings, see "To solve installation problems" on page 11. · In some computers, the COM ports are designed for higher connection speeds than the modem is, which can cause connection problems. To avoid problems, the COM port speed should not be higher than 115200 bps. See "To set the COM port speed" on page 11. To solve installation problems 1. Check that the cable is properly connected to the phone and to the PC. 2. Check which COM port is used for the cable. · The RS232 cable connects to a physical RS232 connector on the PC. Most laptop computers only have one RS232 connector using the COM1 port. Desktop computers sometimes have two or more RS232 connectors designated to COM1, COM2, COM3, ... ports. See your computer's documentation for information on which port the cable is connected to. · The USB cable uses a "virtual" COM port. When the cable is connected, open Control Panel/ System/Hardware/Device Manager. Expand the Ports (COM and LPT) item in the list of devices. Make a note of the COM port number within parentesis after the item "USB cable DCU-11". 3. In Control Panel/Phone Monitor Options/Com Ports, enable the COM port you identified in step 2. 4. Restart the computer without disconnecting the cable or turning off the phone. The phone modem should now be automatically installed. Follow the instructions: "To set up the K700 modem in the PC" on page 6 (USB) or "To set up the K700 modem in the PC" on page 7 (RS232) carefully to complete the modem installation. To set the COM port speed 1. Open the Control Panel/Phone and Modem Options/Modems, select the Sony Ericsson K700 Serial Modem and click Properties. 2. Select the Modem tab and set the Maximum Port Speed to no higher than 115200 in the drop-down list. 11 August 2004 Getting started Using the K700 as a modem This Getting Started guide is published by: Sony Ericsson Mobile Communications AB, SE-221 88 Lund, Sweden Phone: +46 46 19 40 00 Fax: +46 46 19 41 00 www.SonyEricsson.com © Sony Ericsson Mobile Communications AB, 2004. All rights reserved. You are hereby granted a license to download and/or print a copy of this document. Any rights not expressly granted herein are reserved. Second edition (August 2004) Publication number: EN/LZT 108 7215 R2A This document is published by Sony Ericsson Mobile Communications AB, without any warranty*. Improvements and changes to this text necessitated by typographical errors, inaccuracies of current information or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this document. Printed versions are to be regarded as temporary reference copies only. *All implied warranties, including without limitation the implied warranties of merchantability or fitness for a particular purpose, are excluded. In no event shall Sony Ericsson or its licensors be liable for incidental or consequential damages of any nature, including but not limited to lost profits or commercial loss, arising out of the use of the information in this document. 12 August 2004