9 562 brands
2 694 000 user's guides |
|
Download your manual, it's FREE! Diplodocs allows you to download several types of document in order to best use your FOSTEX PD606 : user manual, user guide, instruction manual.
|
|
Need help using a product?
Where is my user guide?
|
|
User manual FOSTEX PD606 - V1.03 SUPPLEMENT
Diplodocs help download the user guide FOSTEX PD606 - V1.03 SUPPLEMENT .
|
||||||||||||||||||||||||||||||||||||||||||
 | FOSTEX PD606 |  | ||
| FOSTEX PD606 BROCHURE | | ||
| FOSTEX PD606 OWNERS MANUAL VERSION V1.03 SUPPLEMENT | | ||
| FOSTEX PD606 OWNERS MANUAL VERSION V1.10 SUPPLEMENT | | ||
| FOSTEX PD606 V1.30 SUPPLEMENT | |
Preview of the first 3 pages of manual
You either have JavaScript turned off or an old version of Adobe Flash Player
Get the latest Flash Player.
Get the latest Flash Player.
Manual abstract: user guide FOSTEX PD606 - V1.03 SUPPLEMENT
Detailed instructions for use are in the User's Guide.
8289639000
(477323)
Model PD606 Owner's manual
With the upgrade of the PD606 to version 1.03, the following changes have been made. (1) The limiter parameter setting function in the SYS SETUP menu of the MENU mode has been enhanced. The key operation for the disk copy function has been changed.
(2)
Before you make parameter setting for the internal limiter or make disk copy, read this supplement as well as the original manual.
Model PD606 Owner's manual
Limiter parameter setting
The limiter parameter setting function has been enhanced and you can now make limiter parameter setting for the input channels and stereo output busses individually. With the earlier version, the "Limiter parameter" menu item in the "SYS SETUP" menu of the MENU mode is provided to make limiter parameter setting for both the input channels and stereo output busses simultaneously. With version 1.03, the "Limiter CH-Input" and "Limiter STOut" menu items are provided instead of the "Limiter parameter" item.
· Limiter parameter setting for input channels 1 through 6 (Limiter CH-Input) Highlight "Limiter CH-Input" in the SYS SETUP menu and press the [ENTER/YES] key. The display now shows the screen for setting limiter parameters of the input channels, including grouping, threshold, ratio and level detection mode.
· Limiter parameter setting for stereo output busses (Limiter ST-Out) Highlight "Limiter ST-Out" in the SYS SETUP menu and press the [ENTER/YES] key. The display now shows the screen for setting limiter parameters of the stereo output busses, including threshold, ratio and level detection mode.
: The limiters for stereo output busses L and R are always linked (grouped) so
there is no "Grouping" setting item.
Grouping setting (available only for "Limiter CH-Input")
You can select "Mono" or "1-6". (The default is "Mono".) Mono Each input channel limiter works independently according to each input signal level. The limiters for channels 1 through 6 are grouped. All the channel limiters work together according to the highest input level among channels 1 through 6. Therefore, when the limiters work, all signals are compressed at the same ratio and the stereo position of each signal is maintained.
1-6
2
Model PD606 Owner's manual
Threshold level setting
You can select "-6dBFS" or "-12dBFS". (The default is "-6dBFS".)
Ratio setting
You can select "1:3" or "1:5". (The default is "1:5".)
Limiter level detection mode setting
You can select "Peak" or "RMS" (The default is "Peak".) The level detector detects the peak level of a signal. The limiter is activated when the peak level of the signal exceeds the threshold level. If you select "Peak" while you set the threshold level to "-12dBFS", you may feel the limiter works too sensitively compared to a conventional analog limiter. Therefore when you select "Peak", it is recommended that you set the threshold level to "-6dBFS". The level detector detects the RMS level of a signal. The limiter is activated when the RMS level of the signal exceeds the threshold level. In this mode, the limiter works similar to a conventional analog limiter.
Peak
RMS
: The RMS mode is available when the FS is 48 kHz or less. When the FS is higher than 48 kHz, the limiter works in the peak mode.
Key operation for the disk copy function
With the new version, the key operation for executing disk copy is changed. For details about the disk copy function, see page 109 of the operation manual. Key operation with the earlier version (see page 111 of the operation manual.) After the display shows the confirmation message as below, press the [ENTER/YES] key.
Key operation with the new version After the display shows the confirmation message as below, press the [ENTER/YES] key while pulling the [REC] key to the right.
3
FOSTEX CO.
3-2-35 Musashino, Akishima-shi, Tokyo, Japan 196-0021
© PRINTED IN JAPAN JAN. 2008 8289639000 FX
(477323)
...
| Know our Partners | Frequently Asked Questions | Contact Diplodocs team | Last searches Latest additions |
Sitemap |  |
||||||||
| Brands starting with A B C D E F G H I J K L M N O P Q R S T U V W X Y Z # | |||||||||||||
|
|
Copyright © 2005 - 2008 - Diplodocs -
All Rights Reserved. Designated trademarks and brands are the property of their respective owners. |