Epson Stylus CX1500 ® Notices and Warranty Avis et garantie Avisos y garantía This booklet contains system requirements, safety information, technical specifications, compliance statements, and your Epson America, Inc. Limited Warranty. . . . . . . . . . . . . . page 2 Le présent document contient les exigences système, les consignes de sécurité, les caractéristiques techniques, les déclarations de conformité et la garantie limitée d'Epson America, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9 El presente contiene información sobre requerimientos de sistema, avisos de seguridad, declaraciones de conformidad, especificaciones técnicas y la Garantía limitada de su producto. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . página 16 Windows System Requirements English To use your CX1500 and its software, your system should have: A Pentium® II-equivalent or faster processor Microsoft® Windows® 98SE (factory installed), Windows Me, Windows 2000, or Windows XP (factory installed or upgraded from factory-installed Windows 98SE/2000/Me) A minimum of 128MB of RAM (256MB recommended) A minimum of 500MB available hard disk space for installing the software CD-ROM or DVD drive (4× or faster) Built-in USB port Mouse or pointing device SVGA or higher resolution color monitor with 800 × 600 screen resolution (XGA monitor with 1024 × 768 resolution recommended) Note: On-screen color and tone reproduction are subject to the display capability of your computer system, including the video card, monitor, and software. See the documentation for these products for details. Important Safety Instructions Before using your CX1500, read and follow these safety instructions: Be sure to follow all warnings and instructions marked on the CX1500. Use only the type of power source indicated on the CX1500 label. Use only the power cord that comes with the CX1500. Use of another cord may cause fires or shock. Do not use the cord with any other equipment. Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as air control systems or other high-load devices that regularly switch on and off or are controlled by wall switches or automatic timers. Place the CX1500 near a wall outlet where the plug can be easily unplugged. When connecting the CX1500 to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable. Do not let the power cord become damaged or frayed. If you use an extension cord with the CX1500, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. Keep your CX1500 and computer system away from potential sources of electromagnetic interference, such as loudspeakers or cordless telephone base units. Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. 2 Leave enough room around the CX1500 for sufficient ventilation. Do not place the CX1500 near a radiator or heating vent or in direct sunlight. Place the CX1500 on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. Turn off and unplug the CX1500 before cleaning. Clean with a damp cloth only. Do not spill liquid on it. Always turn the CX1500 off using the P button. Don't turn off the power using a switch on a power strip or unplug the CX1500 until the power light is off. Do not block or cover openings in the CX1500 case or insert objects through the slots. Except as specifically explained in your documentation, do not attempt to service the CX1500 yourself. Unplug the CX1500 and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped or the case damaged; if the product does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. When storing or transporting the CX1500, do not tilt it, stand it on its side, or turn it upside down; otherwise ink may leak from the cartridge. Before transporting the CX1500, make sure the print head is locked in the far right position and the ink cartridges are in place. This product includes a lamp component that contains mercury (Hg). Please consult your state and local regulations regarding disposal or recycling. Do not put it in the trash. English Ink Cartridge Safety Instructions Keep ink cartridges out of the reach of children and do not drink the ink. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with water. To avoid damaging the printer, never move the print head by hand. Don't remove the cartridge label, or ink will leak. Don't remove the green circuit board from the cartridge. Installing a cartridge without a circuit board can damage the printer. Avoid touching the green circuit board, as this can damage the ink cartridge. If you remove an ink cartridge for later use, protect the ink supply port on the bottom of the cartridge from dirt and dust. Place it in a small box, or, if you have the original packaging, store it in there. Store ink cartridges in the same environment as the printer. Stand cartridges upright; the label identifying the color should be on top. You cannot print if an ink cartridge is empty. Leave the empty cartridge installed in the printer until you have obtained a replacement. Otherwise the ink remaining in the print head nozzles may dry out. 3 Specifications English Note: For a complete list of technical specifications, see the on-screen Reference Guide. Printing Printing method Nozzle configuration Print resolution Print direction Ink Cartridges Black Ink Cartridge (T038) Print capacity* Color Ink Cartridge (T039) 180 pages, 5% each CMY (total 330 pages using ISO Letter Pattern 10561, 220 pages at 5% 15%) in calculation, except for in calculation, except for the initial initial ink cartridge ink cartridge Storage: ­4 to 104 °F (­20 to 40 °C); 1 month at 104 °F (40 °C) Transit: ­22 to 140 °F (­30 to 60 °C); 1 month at 104 °F (40 °C) 120 hours at 140 °F (60 °C) Freezing:** 3.2 °F (­16 °C) Dimensions 0.78 × 2.08 × 1.52 inches (19.8 × 52.7 × 38.5 mm) Storage: ­4 to 104 °F (­20 to 40 °C); 1 month at 104 °F (40 °C) Transit: ­22 to 140 °F (­30 to 60 °C); 1 month at 104 °F (40 °C) 120 hours at 140 °F (60 °C) Freezing:** 3.2 °F (­16 °C) 1.69 × 2.08 × 1.52 inches (42.9 × 52.7 × 38.5 mm) On-demand ink jet Monochrome (black): 48 nozzles Color (cyan, magenta, yellow): 45 nozzles (15 nozzles per color) 2880 × 720 dpi Bidirectional with logic seeking Temperature * The figure given is based on continuous printing after ink replacement. The actual print capacity may vary. ** Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C). Mechanical Paper path Sheet feeder capacity Dimensions Weight Top feed, with one auto sheet feeder About 100 sheets at 16 lb (65 g/m2) paper 16.9 × 11.9 × 7.4 inches (430 × 302 × 188.5 mm); not including the loading tray 11.2 lb (5.1 kg) without ink cartridges 4 Electrical 100 - 120 V Model Input voltage range* Rated frequency range Rated current Power consumption 0.4 A (maximum 0.6 A) Approx. 18.4 W (ISO 10561 Letter pattern) Approx. 7.5 W in sleep mode 90 to 132 V 220 - 240 V Model 198 to 264 V 50 to 60 Hz 0.3 A (maximum 0.35 A) Approx. 18.9 W (ISO 10561 Letter pattern) Approx. 7.8 W in sleep mode English Approx. 5.8 W in power-off mode Approx. 5.7 W in power-off mode * Check the label on the back of this product for the voltage information. Environmental Temperature Operating: 50 to 95 °F (10 to 35 °C) Storage: ­4 to 140 °F (­20 to 60 °C) 1 month at 104 °F (40 °C) 120 hours at 140 °F (60 °C) Humidity Operating: 20 to 80% relative humidity Storage (in shipping container): 5 to 85% relative humidity (without condensation) Safety Approval Safety EMC Scanning Scanner type Photoelectric device Effective pixels Maximum document size Scanning resolution Output resolution Image data Interface Light source Reliability Flatbed color image scanner CIS 5100 × 7020 pixels at 600 dpi, 100% 8.5 × 11.7 inches (216 × 297 mm) US letter or A4 size; the reading area can be specified from your software 600 dpi (main scan) 1200 dpi with Micro Step DriveTM (subscan) 75, 100, 150, 200, 300, 600, 1200, 2400, 4800, 9600, and 19200 dpi 16 bits per pixel per color internal 1 to 8 bits per pixel per color external USB 2.0 RGB three color LED 18000 cycles of carriage movement (main unit MCBF) UL CSA C22.2 No. 60950 FCC part 15 subpart B class B CSA C108.8 Class B 5 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. English WARNING: The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. For Canadian Users This Class B digital apparatus complies with Canadian ICES-003. Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Located at: Epson America, Inc. MS 3-13 3840 Kilroy Airport Way Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: Model: Epson C191A Type of Product: Multifunction device 6 Epson America, Inc. Limited Warranty English Applies in the United States and Canada What Is Covered: Epson America, Inc. ("Epson") warrants to the original retail purchaser that the EPSON printer covered by this limited warranty statement, if purchased and operated only in the United States or Canada, conforms to the manufacturer's specifications and will be free from defects in workmanship and materials for a period of one (1) year from the date of original purchase. Epson also warrants that the consumable ink cartridges enclosed with the printer will perform to the manufacturer's specified usage, which usage may expire before the expiration of the limited warranty for the EPSON printer. For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: Should your EPSON printer prove defective during the warranty period, please call the EPSON ConnectionSM at (562) 27 ...