Europe / Australia / New Zealand Edition iCN 600 series with Smart Version 3.0 TM User Manual iCN 600 series | User Manual Contents 1. Introduction ................................................................. 3 2. iCN Features ............................................................... 4 3. Memory Card .............................................................. 6 4. Turning your iCN On and Off....................................... 7 5. Position in a Vehicle .................................................... 8 6. Main Menu Screen.................................................... 10 7. Screen Keyboard ...................................................... 10 8. GPS Status ............................................................... 11 9. Setting your Destination ............................................ 12 10. Avoiding an Area ..................................................... 17 11. Viewing Your Route................................................. 18 12. Map Screen Pop-up Menu ..................................... 21 13. Route Demonstrator ............................................... 22 14. Favorites & Shortcuts.............................................. 23 15. Settings................................................................... 25 16. Smart Desktop.................................................... 30 17. Updating your iCN .................................................. 31 18. Installing Maps Using Smart Desktop ................. 32 19. Continuous Continental Navigation ......................... 33 20. Smart Desktop Advanced Features .................... 35 21. Accessories ............................................................ 38 2 iCN 600 series | User Manual 1. Introduction Whether you travel in your own country, or overseas, the iCN will direct you to your destination without the need for map books and second-hand instructions. The Global Positioning System is available free of charge, at any time, and is accurate to within 5 m (15 ft). Your iCN map provides street level detail for door-to-door navigation, including Points Of Interest (POIs) such as accomodation, railway stations and airports. Use this guide to learn how to operate it effectively and safely, plus find out all of the different features available to you. GPS and GPS Signals The Global Positioning System (GPS) is a network of satellites that transmit accurate time and position information worldwide. GPS receivers receive signals from these satellites, and use the information to determine an exact location. Satellites orbit the Earth at around 12,000 miles. While a GPS receiver can detect signals from up to 12 satellites at anytime, only three are needed to provide a position or "fix" (latitude and longitude) for vehicle navigation systems. The iCN GPS antenna receives GPS signals. To receive GPS signals, ensure the iCN is outdoors, or in a vehicle outdoors, and the GPS antenna has an unobstructed view of the sky. The iCN can operate in all weather types except snowfall. Safety Notice In a vehicle, it is your sole responsibility to place, secure, and use the iCN in a manner that will not cause accidents, personal injury or property damage. The user of this product is solely responsible for observing safe driving practices. It is your sole responsibility that the vehicle mount installation instructions are read carefully, understood, and used consistent with the laws of operation for each country in which the device is used. It is your sole responsibility to adhere to the following safety instructions at all times: · Do not operate the iCN while driving or place the iCN in a position that obstructs the driver's view · Do not mount in a way that interferes with airbags or other safety equipment · Do not leave in view while your vehicle is unattended, especially in strong sunlight · Do not use or handle the iCN when it is hot, leave it to cool out of direct sunlight Navman disclaim all liability for use of this product in a way that may cause accidents, damage or may violate law. 3 iCN 600 series | User Manual 2. iCN Features It is recommended that you familiarize yourself with the basic operations of your iCN such as using the 8-way toggle and volume control. Front Components 2 3 4 1 5 6 7 8 Component 1 2 3 4 5 6 7 8 Screen OK Zoom/Brightness ESC 8-way Toggle Page Volume Menu/Power Description Displays maps and menu options. Select the highlighted menu option, text or command. Change the amount of map area shown, or press and hold to adjust the screen brightness. Cancels an action, deletes the last text character, returns to the previous screen or Map. Hold down to delete a line of text. Use to scroll up/down and move round a map to select a destination. Change map views, including 3D Map* view. Use to view further screens if available. Press to hear the very next instruction, or hold down to adjust the voice guidance volume. Press to return to the Main Menu or hold down to turn on/off. * iCN 630, 635, 650 only 4 iCN 600 series | User Manual Back Components 2 3 4 1 5 6 Component 1 2 3 4 5 6 Speaker Memory Card Slot GPS Receiver Car Antenna Socket Power Socket USB Socket Description Outputs voice commands and warnings. Use Volume button to adjust. Slot for memory card. Insert card with label facing the front of the iCN. Receives signals from GPS satellites when lifted out to the horizontal position. Connection socket for GPS car antenna (not included). Connection socket for power cable. Connection socket for USB cable to your computer. Remote Control Button functions are the same as the iCN control buttons. You cannot turn on the iCN using the Remote Control. Only included with the iCN 635 and 650. Available for the iCN 610 as an accessory. 5 iCN 600 series | User Manual 3. Memory Card iCN 610 and 635 Your iCN comes with a memory card contaning a preactivated map*. To navigate to your destination you will first need to insert the memory card into your iCN. To navigate in an area outside of the preactivated map, you must first purchase a Map Product Key from your Navman supplier. Install Smart Desktop, then use it to activate your Map Product Key and install the required map. See Installing Maps Using Smart Desktop on page 30. * If you purchased your iCN 635 in New Zealand, you will not receive a memory card as the preactivated map of New Zealand is contained in internal memory. Inserting Memory Card Note: The first time you insert the memory card you will first need to remove the plastic space saver from the SD/MMC slot. To insert the memory card, first ensure that the iCN is turned off, then gently insert the card in the Memory Card slot with the label facing the front of the iCN. Removing Memory Card To remove the memory card, first ensure that the iCN is turned off, then gently push the top edge of the card to release it and pull it out of the slot. iCN 650 The iCN 650 contains all preactivated maps for West Europe or US/Canada in internal memory and does not come with a memory card. 6 iCN 600 series | User Manual 4. Turning your iCN On and Off Use the Menu/Power button to turn your iCN on and off. Turn iCN On 1. Plug the power adapter into the socket on the left of the iCN and the other end into the vehicle lighter socket. 2. Gently pull the bottom of the GPS receiver away from the iCN. The receiver will lift out to a horizontal position to allow it to obtain a GPS fix. 3. Press the Menu/Power button for one second. Turn iCN Off 1. Gently push the GPS receiver back towards the iCN. The receiver will click in to place. 2. Complete one of the following: · iCN 610, 650: Press the Menu/Power button for three seconds. When the confirmation message displays, select Yes and press OK. The iCN will turn off. · iCN 635: Press the Menu/Power button for three seconds until the iCN turns off. 7 iCN 600 series | User Manual 5. Position in a Vehicle Before you begin, check if your vehicle is fitted with a heat reflecting or heated windshield. If so, you will need to purchase an external antenna for your iCN to receive GPS signals. There are a number of ways to position an iCN in a vehicle. Follow these instructions carefully. · For security and to avoid overheating, do not leave your iCN in an unattended vehicle, especially in strong sunlight. · Do not use or handle the iCN when it is hot -- leave it to cool out of direct sunlight. If your iCN is too hot, you will be prompted to turn down the brightness (press and hold the Zoom button). If the iCN continues to get hotter the screen will go blank, however voice instructions will continue. Suction Mount 1. Slip the locking nut over the ball foot. 2. Snap the socket clip onto the ball foot and tighten the locking nut onto the thread of the socket clip. 3. Clean and dry the surfaces, hold the suction cup firmly against the glass and press down the lever. 4. Position the two locating slots on the underside of the iCN into the tabs on the socket clip. Push the iCN into the clip. 5. Open the antenna outwards, so it has a clear view of the sky. 6. Plug the power adapter into the socket on the left of the iCN and the other end into the vehicle lighter socket. 8 iCN 600 series | User Manual Adhesive Tape and Screw Mount* You can use the base plate, adhesive tape and screws supplied to mount the iCN directly into the vehicle dashboard. Note: This is a permanent solution -- the adhesive tape cannot be removed once fixed. 1. Choose a position on the dashboard where the iCN will be clearly visible by the driver and ensure all surfaces are clean and dry. 2. Remove the protective layer from the tape and press down firmly for 30 seconds. 3. Press the suction cup firmly against the surface and press the lever down. 4. Use the base plate and screws supplied to fix the iCN base into the dashboard. 5. Slip the locking nut over the ball foot with the flat side facing upwards. 6. Snap the socket clip onto the ball foot. 7. Wind the locking nut onto the thread of the socket clip until firm. 8. Snap the iCN onto the socket clip. Position the two locating tabs on the underside of the iCN into the corresponding slots on the socket clip. Then push the iCN into the clip. 9. Open the antenna outwards so the GPS antenna has a clear view of the sky. 10. Plug the power cable into the socket on the left side of the iCN and the other end into the vehicle lighter socket. *iCN 635, 650 only 9 iCN 600 series | User Manual 6. Main Menu Screen The Main Menu screen gives you access to all of the iCN's functions, including navigating to a destination. 1. Press the MENU/Power button for about one second. 2. The Language screen will display. Use the 8-way toggle to highlight your language choice and press OK. · You can stop the Language screen displaying on startup by selecting the Do not show on startup check box. Press OK to confirm. 3. Press the Page button. 4. The Warning screen will display. Read the warning mesage and press OK to confirm that you understand. 5. The Tutorial will display. Press the Page button to move through the screens. · You can turn off the Tutorial on startup by using the 8-way toggle to highlight the Do not show Tutorial on startup check box, press OK to confirm. 6. The Main Menu screen will display. 7. Use the 8-way toggle to highlight Main Menu options, confirm a selection by pressing OK. · Return to the Main Menu at any time by pressing the MENU/Power button. 7. Screen Keyboard The screen keyboard will display when required to enter text, such as when entering a street name. 1. Use the 8-way toggle to move around the keyboard. · Press OK to select a character. · Press ESC to delete a character; Hold ESC to delete the line. · Press Zoom up to display the Alternative keyboard. · Press Zoom down to return to the Alphabetical keyboard. · The list will reduce to match your search criteria. Press Page to see more of the list. 2. Use the 8-way toggle to select a search result from the list. Press OK. 10 iCN 600 series | User Manual 8. GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. This screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with a North-pointing compass, the heading in degrees and ground speed. Satellites available are shown as segments. From the Main Menu, select Settings > More Settings > GPS Status. The GPS Status screen will display. · Yellow -- a satellite is being tracked but is not being used · Red -- a satellite is being used to determine a two dimensional (2D) fix · Green -- the satellite is being used to determine your position. Latitude and longitude of the current position Current heading in degrees and ground speed Each segment represents a satellite A green circle indicates a valid fix Local time The circle under the sattelite segments is green when there is a valid fix (2D or 3D), and red when there is ...