User manual KONICA MINOLTA 7130 - annexe 10

VI Network (For administrator) This volume explains how to make the network settings. Chapter 17 Summary of Network Functions ........................... 446 Chapter 18 Setting from the Control Panel .................................. 451 Chapter 19 Using Utilities...................... 542 Chapter 20 Printing with IP Peer-to-Peer (Windows 95/98/Me only) ... 549 Chapter 21 Using IPX Peer-to-Peer (Windows 95/98/Me only) ... 569 Chapter 22 Settings for Printing with LPD/ LPR (Windows NT 4.0/2000/XP only) ..................................... 576 Chapter 23 Using with NetWare ............ 601 Chapter 24 Using via the Internet (Windows 2000/XP) ............................... 608 Chapter 25 UNIX Configuration............. 624 Chapter 26 Use with AppleTalk............. 637 Chapter 27 When There Is Trouble on the Network................................ 643 445 VI Network (For administrator) Chapter 17 Summary of Network Functions This chapter summarizes the print controller network functions. 17-1. Network functions...........................................................................447 17-2. Network function usage ................................................................. 449 17-3. Network setting item list................................................................. 450 446 17-1. Network functions Features of network functions This unit can handle various network environments flexibly and is equipped with the following network functions. 10Base-T/100Base-TX (Fast Ethernet) automatic selection It supports for multiple protocols (TCP/IP, IPX/SPX, AppleTalk (EtherTalk)) Through dedicated utilities, it supports IP Peer-to-Peer printing through TCP/IP from Microsoft Windows 95/98/Me. Through dedicated utilities, it supports IPX Peer-to-Peer printing through IPX/SPX from MicroSoft Windows 95/98/Me. It supports LPD/LPR on TCP/IP for Microsoft Windows NT 4.0/2000/XP. It supports lpd/lpr on TCP/IP for UNIX. It supports Novell NetWare printer server functions and supports both bindary mode and Novell Directory Service (NDS). It supports AppleTalk on Macintosh. An HTTP server is built in and through links with the accessory Management Access Program (MAP), standard web browser, etc., the printing system can be managed. It supports for acquiring IP addresses automatically through DHCP It supports for setting up Netware on NWSetup utility for Microsoft Windows 95/98/Me/NT 4.0/2000/XP. It supports for assigning IP addresses on BOOTP Lite utility for Microsoft Windows 95/98/Me/NT 4.0/2000/XP. It supports printing from various UNIX systems through UNIX-TCP/IP Programs. Use with peer-to-peer connections (Windows 95/98/Me) With LAN (Local Area Network) comprised solely of computers running Windows 95/98/Me, the printer can be used even without a dedicated printer server. In this case, the print controller is connected to the network with a connection configuration called peer-to-peer. Peer-to-peer: A network configuration that connects computers under equivalent conditions without using a central server. 447 VI Network (For administrator) Chapter 17 Summary of Network Functions 17-1. Network functions Use through LPD/LPR (Windows NT 4.0/2000/XP) This printing system supports printing with LPD/LPR with Windows NT 4.0/2000/XP. You can connect the print controller to a print server in a UNIX environment and send print instructions to the printer from Windows NT 4.0/2000/XP. This must be a print request format that can be used with LPD (Line Printer Deamon)/LPR:Windows NT 4.0/2000/XP. Using with UNIX This printing system supports printing with lpd/lpr with UNIX. You can connect the print controller to a print server in a UNIX environment and sent print instructions to the printer from various UNIX systems. Using with NetWare The Novell NetWare 3.x or Novell NetWare 4.x printer server functions are supported. You can connect the print controller to a network that uses Novell NetWare 3.x or 4.x as the network OS and send print instructions to the printer server (network controller) from a client terminal. For details on NetWare functions, refer to the NetWare manual. Using with Macintosh (Only when PostScript option installed) Printing on a Macintosh with AppleTalk is supported. You can connect the print controller to the AppleTalk environment print server and send print instructions to the printer from a Macintosh. 448 VI Network (For administrator) Chapter 17 Summary of Network Functions 17-2. Network function usage Connection with the network Please connect the UTP cable (Category 5 recommended) connected to the network to the Ethernet connector (RJ-45) of the print controller (network controller). The settings required for connecting to the network depend on the environment of the network the print controller is connected to, the OS of the computers making up the network, etc. Make the settings required to match the environment into which this system is being introduced. Network setting method There are the following two methods for making the print controller network settings. Setting from the copier control panel Load the setting screen from the copier's control panel and set the network functions. For the method setting the network functions from the copier's control panel, refer to [Chapter 18 Setting from the Control Panel] ( page Page 451) Setting using the Web Utilities This sets the network controller from a computer connected to the network using the Web Utilities. For details on the Web Utilities, refer to the Web Utilities user's manual. 449 VI Network (For administrator) Chapter 17 Summary of Network Functions 17-3. Network setting item list This explains the settings required when connecting the print controller to the network. Set each setting item to match the environment of the network to which the print controller is connected. When changing the setting for an item, ask the network administrator. Unit Info ( Page 457) Check such information as the MAC address and ROM version for the network controller. Update NIC ( Page 458) The "Network setting" items are updated to the changed contents. Print on Startup ( Page 462) This sets whether or not to output the "Network settings list" immediately after the copier power is switched on. TCP/IP Setup ( Page 464) This sets the items required for communicating with TCP/IP. NetWare Setup ( Page 482) This sets the items required for communicating with NetWare. AppleTalk Setup ( Page 501) This sets the items required for communicating with AppleTalk. WINS Setup ( Page 508) This sets the items required for searching with NetBIOS. FTP Setup ( Page 515) This sets the items for sending scanned images from the print controller to the FTP server. Email Setup ( Page 520) This sets the items required for sending scanned images from the print controller as email attachments. DNS Setup ( Page 535) This sets the items required for using a DNS server in the network to which the print controller is connected. Admin Password ( Page 460) This is used for changing the Network controller password. Factory Default ( Page 540) This returns the "Network settings" to their default state (the factory defaults). 450 VI Network (For administrator) Chapter 17 Summary of Network Functions VI Network (For administrator) Chapter 18 Setting from the Control Panel This chapter explains the method for making the network settings from the Copier's control panel. 18-1. Method for setting network from control panel.......................... 452 18-2. NIC ..................................................................................................457 18-3. Print on startup.............................................................................. 462 18-4. TCP/IP setup .................................................................................. 464 18-5. NetWare setup ...............................................................................482 18-6. AppleTalk setup............................................................................. 501 18-7. WINS setup ....................................................................................508 18-8. FTP setup ....................................................................................... 515 18-9. Email setup ....................................................................................520 18-10. DNS setup ...................................................................................... 535 18-11. Factory default .............................................................................. 540 451 18-1. Method for setting network from control panel This explains how to set the network connection using the Copier's control panel and LCD screen. 1 Press the button on the control panel. The [Printer basic mode] screen is displayed on the LCD screen. 2 Touch the [SETTING] key on the LCD screen. The [Main Menu] screen is displayed on the LCD screen. 452 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-1. Method for setting network from control panel 3 Touch the [5] key on the LCD screen. 4 Touch the [OK] key on the LCD screen. The [Network Setup] screen is displayed on the LCD screen. The following settings are made on the [Network Setup] screen. Unit Info Update NIC Print on Startup TCP/IP Setup NetWare Setup AppleTalk Setup WINS Setup FTP Setup Email Setup DNS Setup Page 457 Page 458 Page 462 Page 464 Page 482 Page 501 Page 508 Page 515 Page 520 Page 535 453 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-1. Method for setting network from control panel Admin Password Factory Default Page 460 Page 540 To switch the items displayed on [Network Setup] screen, touch the [PREV] or [NEXT] key on the LCD screen. 5 6 7 8 9 Select the item to set, then touch the [OK] key on the LCD screen. Set each item and when setting of all the items is complete, touch the [CANCEL] key or [OK] key. The display returns to the [Network Setup] screen. The [Update NIC] is executed. For the [Update NIC] procedure, refer to [Update NIC] ( Page 458). Wait until the [Please wait Printer initializing] display on the LCD screen changes to [Ready to print]. Switch off the Copier main power, wait about 10 seconds, then switch the power back on again. The network setting items are updated with the changed contents. G After switching Off the Copier main power, if you switch it back on without waiting, the print controller may not operate normally and errors may be displayed. In this case, if you switch the Copier main power Off again, wait at least 10 seconds or so, then switch the main power On again, the system will operate normally. 454 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-1. Method for setting network from control panel IP address settings There are the following two methods for setting the IP address etc. for the network controller. Assigning the IP address automatically with the DHCP server When managing IP addresses with the DHCP server on the network that the network controller is connected to, there is no need to set a unique IP address for the network controller. The IP address can be acquired automatically from the DHCP server. Setting a unique IP address for the network controller When setting individual IP addresses for equipment connected to the network, the IP address assigned to the network controller is set with manual input. In this case, it is also necessary to set the sub-net mask and other information with manual input. For details on management methods for network IP addresses etc., check with the network administrator. For details on making network settings manually, check with the network administrator. When making network settings manually, in addition to the method explained here using the Copier's control panel, you can also use a web utility. For details, refer to the Web Utilities user's manual. 455 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-1. Method for setting network from control panel Character input on LCD screen When characters must be input on the LCD screen, touch the alphanumeric input keys on the screen. When you touch [<<] or [>>] the buttons that can be input are switched. When you touch [BS], one input character is deleted. When you touch [CLR], the input characters are all deleted. 456 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-2. NIC After checking the information related to the network controller installed in the print controller and making any necessary changes, finalize the settings. The password used must be changed when the network settings are updated and when the network controller is initialized. Unit Info This checks the hardware information for the network. 1 Touch the [1] key on [Network Setup] screen on the LCD screen. For details on the procedure for displaying the [Network Setup] screen, refer to [18-1.Method for setting network from control panel] ( Page 452). The [Network Setup] screen displays with [1] already selected. 2 3 Touch the [OK] key on the LCD screen. The network controller [ROM Version], [Serial Number] and [Ethernet Address] are displayed. To check information, touch the [CANCEL] key on the LCD screen. The display returns to the [Network Setup] screen. 457 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-2. NIC Update NIC The [Network Setup] items are updated to the changed contents. 1 Touch the [2] key on [Network Setup] screen on the LCD screen. G [2] cannot be selected until the contents of the [Network Setup] items have been changed. For details on the procedure for displaying the [Network Setup] screen, refer to [18-1.Method for setting network from control panel] ( Page 452). 2 3 Touch the [OK] key on the LCD screen. A screen is displayed to confirm that you want to execute an [Update NIC]. Touch the [OK] key on the LCD screen. The screen for inputting the password is displayed. To cancel the [Update NIC], touch the [2] key on the LCD screen, then touch the [OK] key on the LCD screen. 458 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-2. NIC 4 Use the alphanumeric keys on the LCD screen to input the password. The default setting for the password is [sysadm]. For details on character input, refer to [Character input on LCD screen]( Page 456). 5 Touch the [OK] key on the LCD screen. The [Please wait] message is displayed and the initial operation starts. Wait until [Ready] is displayed and operations end. 6 Switch off the Copier main power, wait about 10 seconds, then switch the power back on again. The network setting items are updated with the changed contents. G The updated settings do not operate normally until the Copier is switched Off, then On again. G After switching Off the Copier main power, if you switch it back on without waiting, the print controller may not operate normally and errors may be displayed. In this case, if you switch the Copier main power Off again, wait at least 10 seconds or so, then switch the main power On again, the system will operate normally. 459 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-2. NIC Admin Password The password to input when changing the network controller settings can be changed. 1 Touch the [11] key on [Network Setup] screen on the LCD screen. For details on the procedure for displaying the [Network Setup] screen, refer to [18-1.Method for setting network from control panel] ( Page 452). 2 3 Touch the [OK] key on the LCD screen. The [NIC Password] screen is displayed. Touch the alphanumeric input keys on the LCD screen and input the current password at [Current password]. The default setting for the password is [sysadm]. If you have forgotten your current password, by inputting [3069] for the [Current password input], the new password input screen is displayed. The only password that can be displayed using [3069] is the NIC password. 4 Touch the [OK] key on the LCD screen. The [NIC Password] screen is displayed. 460 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-2. NIC 5 Touch the alphanumeric input keys on the LCD screen to input a new password 4-8 characters long. 6 7 Touch the [OK] key on the LCD screen. The screen for inputting the new password is displayed. Use the alphanumeric keys on the LCD screen to input the new password again. 8 9 Touch the [OK] key on the LCD screen. The display returns to the [Network Setup] screen. The [Update NIC] is executed. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). The network setting items are updated with the changed contents. 461 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-3. Print on startup This sets whether or not to print a network settings list automatically when the power for the Copier is switched on. 1 Touch the [3] key on [Network Setup] screen on the LCD screen. For details on the procedure for displaying the [Network Setup] screen, refer to [18-1.Method for setting network from control panel] ( Page 452). 2 3 Touch the [OK] key on the LCD screen. The [Print on Startup] screen is displayed. To print the network settings list when the power is switched on, touch the [1] key on the LCD screen; to not print, touch the [2] key on the LCD screen. 4 Touch the [OK] key on the LCD screen. The display returns to the [Network Setup] screen. 462 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-3. Print on startup 5 The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC] ( Page 458). 463 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup The information required for using the print controller in the TCP/IP environment is set. 1 Touch the [4] key on [Network Setup] screen on the LCD screen. For details on the procedure for displaying the [Network Setup] screen, refer to [18-1.Method for setting network from control panel] ( Page 452). 2 Touch the [OK] key on the LCD screen. The [TCP/IP Setup] screen is displayed. The following settings are made on this screen. Enable TCP/IP Page 466 IP Address Page 468 Subnet Mask Page 470 Default Gateway Page 472 Base Port Number Page 474 Enable DHCP Page 476 IP Addr.in NVRAM Page 478 LPD Banner Page 480 To switch the items displayed on the [TCP/IP Setup] screen, touch the [PREV] key or [NEXT] key on the LCD screen. 464 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 3 4 When the settings for all the items is complete, touch the [CANCEL] key on the LCD screen. The [Network Setup] screen is displayed. The [Update NIC] is executed. For the [Update NIC] procedure, refer to [Update NIC] ( Page 458). 465 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup Enable TCP/IP This sets whether or not to enable TCP/IP usage. 1 Touch the [1] key on [TCP/IP Setup] screen on the LCD screen. The [TCP/IP Setup] screen displays with [1] already selected. 2 3 Touch the [OK] key on the LCD screen. The screen for setting TCP/IP usage is displayed. To disable TCP/IP settings, touch the [2] key on the LCD screen; to enable them, touch the [1] key on the LCD screen. The factory default is [Yes]. 4 Touch the [OK] key on the LCD screen. The display returns to the [TCP/IP Setup] screen. 466 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 5 6 When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). 467 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup IP Address The IP address for the print controller network controller is registered. When using the DHCP server for IP address management, in [DHCP usage] enabled, the IP address acquired with DHCP is displayed. 1 Touch the [2] key on [TCP/IP Setup] screen on the LCD screen. 2 3 Touch the [OK] key on the LCD screen. The [IP Address] screen is displayed. Touch numeric keys on the LCD screen to input the IP address. Specify four numbers from 0-255 delimited in [.(dot)]. When you touch [<<] or [>>], the input position is moved. IP address input example:192.168.00.10 4 Touch the [OK] key on the LCD screen. The display returns to the [TCP/IP Setup] screen. 468 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 5 6 When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). 469 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup Subnet Mask This inputs the subnet mask for the network to which the print controller is connected. When using the DHCP server for IP address management, in [DCHP usage] enabled, the subnet mask acquired with DHCP is displayed. 1 Touch the [3] key on [TCP/IP Setup] screen on the LCD screen. 2 3 Touch the [OK] key on the LCD screen. The [Subnet Mask] screen is displayed. Touch numeric keys on the LCD screen to input the subnet mask. Specify four numbers from 0-255 delimited in [.(dot)]. When you touch [<<] or [>>], the input position is moved. Subnet mask input example:255.255.255.0 4 Touch the [OK] key on the LCD screen. The display returns to the [TCP/IP Setup] screen. 470 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 5 6 When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). 471 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup Default Gateway This inputs the gateway for the network to which the print controller is connected. When using the DHCP server for IP address management, in [DHCP usage] enabled, the gateway address acquired with DHCP is displayed. 1 Touch the [4] key on [TCP/IP Setup] screen on the LCD screen. 2 3 Touch the [OK] key on the LCD screen. The [Default Gateway] screen is displayed. Touch numeric keys on the LCD screen to input the gateway address. Specify four numbers from 0-255 delimited in [.(dot)]. When you touch [<<] or [>>], the input position is moved. Gateway address input example:192.168.0.1 4 Touch the [OK] key on the LCD screen. The display returns to the [TCP/IP Setup] screen. 472 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 5 6 When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). 473 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup Base Port Number This specifies any value as the base port number. G If the port number is changed inappropriately, this may create obstructions for the network. Do not change the port number unless necessary. 1 Touch the [5] key on [TCP/IP Setup] screen on the LCD screen. 2 3 Touch the [OK] key on the LCD screen. The [Base Port Number] screen is displayed. Touch numeric keys on the LCD screen to input a new base port number from 1000 to 65530. The factory default is [10000]. 4 Touch the [OK] key on the LCD screen. The display returns to the [TCP/IP Setup] screen. 474 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 5 6 When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). 475 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup Enable DHCP This sets whether or not to automatically acquire IP addresses and other such information from a DHCP (Dynamic Host Configuration Protocol) server. For details on [IP Addr .in NMRAH] and [Enable DHCP], refer to [IP address settings] ( [27-4. Using DHCP] ( Page 649). Page 455) and 1 Touch the [6] key on [TCP/IP Setup] screen on the LCD screen. 2 3 Touch the [OK] key on the LCD screen. The DCHP settings screen is displayed. When not acquiring information from a DHCP server, touch the [2] key on the LCD screen; when acquiring it, touch the [1] key on the LCD screen. The factory default is [DHCP Disable]. 4 Touch the [OK] key on the LCD screen. The display returns to the [TCP/IP Setup] screen. 476 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 5 6 When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). 477 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup IP Addr.in NVRAM This sets whether or not to save the IP address displayed at [IP Address] in the print controller non-volatile RAM. For details on [IP Addr .in NMRAH] and [Enable DHCP], refer to [IP address settings] ( [27-4. Using DHCP] ( Page 649). Page 455) and 1 Touch the [7] key on [TCP/IP Setup] screen on the LCD screen. 2 3 Touch the [OK] key on the LCD screen. The [IP Addr.in NVRAM] screen is displayed. To save the IP address, touch the [1] key on the LCD screen; to not save it, touch the [2] key on the LCD screen. The factory default is [YES]. 4 Touch the [OK] key on the LCD screen. The display returns to the [TCP/IP Setup] screen. 478 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 5 6 When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). 479 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup LPD Banner This sets whether or not to print information as a banner page for LPD/LPR printing. 1 Touch the [8] key on [TCP/IP Setup] screen on the LCD screen. 2 3 Touch the [OK] key on the LCD screen. The [LPD Banner] screen is displayed. To print banner pages, touch the [1] key on the LCD screen; to not print, touch the [2] key on the LCD screen. The factory default is [NO]. 4 5 Touch the [OK] key on the LCD screen. The display returns to the [TCP/IP Setup] screen. When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. 480 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-4. TCP/IP setup 6 The [Update NIC] is executed. The network setting items are updated with the changed contents. For the [Update NIC] procedure, refer to [Update NIC]( Page 458). 481 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-5. NetWare setup The information required for using the print controller in the NetWare network environment is set. 1 Touch the [5] key on [Network Setup] screen on the LCD screen. For details on the procedure for displaying the [Network Setup] screen, refer to [18-1.Method for setting network from control panel] ( Page 452). 2 Touch the [OK] key on the LCD screen. The [NetWare Setup] screen is displayed. To switch the setting items displayed on the [NetWare Setup] screen, touch the [PREV] key or [NEXT] key on the LCD screen. For details on NetWare settings, refer to the NetWare user's manual. The following settings are made on this screen. Enable NetWare Page 483 Server Name Page 485 Server Password Page 487 File Server Page 489 NDS Context Page 491 NDS Tree Page 493 Queue Scan Rate Page 495 Frame Type Page 497 Disable Bindery Page 499 482 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-5. NetWare setup Enable NetWare This sets whether or not to use the print controller in the NetWare network environment. G When NetWare is not being used as the network OS, if [Use NetWare] is enabled, it may take more time for the network controller to start up. When not using NetWare, always set [No]. 1 Touch the [1] key on [NetWare Setup] screen on the LCD screen. The [NetWare Setup] screen displays with [1] already selected. 2 3 Touch the [OK] key on the LCD screen. The [Enable NetWare] screen is displayed. To use the print controller in the NetWare environment, touch the [1] key on the LCD screen; to not use it, touch the [2] key on the LCD screen. The factory default is [YES]. 483 VI Network (For administrator) Chapter 18 Setting from the Control Panel 18-5. NetWare setup 4 5 6 Touch the [OK] key on the LCD screen. The display returns to the [NetWare Setup] screen. When setting another item, do so now. For details on the operation methods for other settings, refer to the respective page. The [Update NIC] is executed.