User manual FUJITSU SIEMENS SCENIC 320 - annexe 1

  Is there ... ... any technical problem or other question you need clarified? Please contact: ... anything you want to tell us about this manual? Please send us your comments quoting the order number of the manual. Siemens AG User Documentation Department ICP CS BS2000 OS ID4 Otto-Hahn-Ring 6 D-81730 München · · Our Hotline: Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 180 3777 000 your sales office The addresses of your service partners are contained in the guarantee booklet or in the service address booklet. The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.siemens.de Your training needs? The Siemens Training Centers offer you a wide range of training courses in information technology and on IT products and other subjects - onsite near to your workplace or offsite at one of our training centers. Contact us for information on consulting, course schedules and selfstudy material Either fax (which is the fastest way): Fax: ..49 89 636-42945 Or write to: Siemens AG Training Center, Beratungsservice D-81730 München       ! "   #  $   % &' ()*+, -. / 01  2  ' &' 344 3544 A26361-D1131-Z180-1-7619 English System board D1131 Additional Technical Manual April 1999 edition Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright © Siemens AG 1999. All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. Contents Introduction ....................................................................................................................................... 1 Features ........................................................................................................................................... 1 Mechanics ........................................................................................................................................ 2 Connectors and Jumpers .......................................................................................................... 4 Internal serial (COM2) port (external via wire) .................................................................. 4 Power supply ATX connector ............................................................................................ 4 Wake on LAN (WOL) connector ........................................................................................ 5 Front panel connector ....................................................................................................... 5 Power on switch connector (ON/OFF switch) .................................................................... 6 Fan 1 connector ................................................................................................................ 6 Fan 2 connector ................................................................................................................ 6 Configuration............................................................................................................................. 6 Celeron (PGA 370) processors core frequency (300 - 433 MHz)....................................... 6 Functions controlled by the switch block ........................................................................... 7 Power........................................................................................................................................ 7 Power requirement ............................................................................................................ 7 Power loadability ............................................................................................................... 7 Installing Drivers ............................................................................................................................... 7 Upgrades .......................................................................................................................................... 8 Main memory ............................................................................................................................ 8 Troubleshooting ................................................................................................................................ 8 Error message BIOS update ..................................................................................................... 8 The screen stays blank ............................................................................................................. 8 A26361-D1131-Z180-3-7619 Introduction i This system board is available in different configuration levels. Depending on the hardware configuration of your device, it may be that you cannot find several options in your version of the system board, even though they are described. You may find further information e. g. in the complete Technical Manual for the system board and in the description "BIOS Setup". Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers & Utility" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers and utilities". Features Function Processor Chipset DIMM sockets Main memory up to ISA slots PCI slots ISA/PCI shared AGP Port System monitoring Thermal Management Wake On LAN (WOL) Keyboard On IrDA Chipcard Reader Save to Disk Save to RAM IAPC *: Front Side Bus Version G1x PGA 370 or Celeron 440 ZX / 66 MHz FSB* 2 256 Mbyte 0 2 1 1 --X ---X --- ! Computer mainboards and components contain very delicate IC chips. To protect them against damage caused from electric static, you have to follow some precautions: · · · Unplug your computer when you work inside. Hold components by the edge, don't touch their leads. Use a grounded wrist strap. Place the mainboard and the components on a grounded antistatic pad whenever you work outside the computer. Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring). A26361-D1131-Z180-3-7619 English - 1 Mechanics Mechanics Layout µ-ATX 9,6" x 8'' (243,84 mm x 203,2 mm) Some of the following connectors are optional and may therefore not be included on your mainboard. DIMM 2 DIMM 1 AGP PCI 3 PCI 2 2 5 1 1 = Serial port 1 2 = PS/2 mouse port 3 = PS/2 keyboard port 3 4 6 4 = Parallel interface 5 = USB connection 2 6 = USB connection 1 2 - English A26361-D1131-Z180-3-7619 PCI 1 ISA Mechanics 1 2 3 45 6 7 DIMM 2 DIMM 1 10 AGP 9 PCI 3 PCI 2 8 1 = Serial chipcard reader interface or serial port 2 2 = Power supply 3 = Floppy disk drive 4 = IDE drives 3 and 4 (secondary) 5 = Wake On LAN 6 = Connector for control panel 7 = IDE drives 1 and 2 (primary) 8 = ON/OFF switch 9 = Fan 1 (e. g. for the processor) 10 = Fan 2 (e. g. for the processor) The components and connectors marked do not have to be present on the system board. PCI 1 A26361-D1131-Z180-3-7619 ISA English - 3 Mechanics Connectors and Jumpers ! Some of the following connectors are optional! Internal serial (COM2) port (external via wire) 2 1 Pin 1 3 5 7 9 11 13 15 Signal DCD 2 (low asserted) SIN 2 (high asserted) SOUT 2 (high asserted) DTR 2 (low asserted) GND EXT SMI (low asserted) RESETDRV (high asserted) GND Pin 2 4 6 8 10 12 14 16 Signal DSR 2 (low asserted) RTS 2 (low asserted) CTS 2 (low asserted) PC_ON_Strobe VCC Auxiliary VCC GND Key Power supply ATX connector 20 11 10 Pin 1 3 5 7 9 11 13 15 17 19 Signal +3.3 V GND GND GND +5 V Auxiliary +3.3 V GND GND GND +5 V Pin 2 4 6 8 10 12 14 16 18 20 Signal +3.3 V +5 V +5 V Powergood (high asserted) +12 V -12 V PS on (low asserted) GND -5 V +5 V 1 4 - English A26361-D1131-Z180-3-7619 Mechanics Wake on LAN (WOL) connector 1 Pin 1 2 3 Signal +5 V Auxiliary GND Wake pulse (high asserted) Front panel connector Reset 1) HD-LED 1) Power On LED 1) 1 2 Power On/Off SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface. Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Boot Lock Anode Standby LED Key Anode PON_LED Not connected Cathode PON_LED (GND) Not connected Not connected Key Anode HD_LED Cathode HD_LED GND Power Button Not connected Reset Button Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC Key pin Key pin Key Not connected SCSI LED Input SCSI LED Input Not connected Key GND GND GND A26361-D1131-Z180-3-7619 English - 5 Mechanics Power on switch connector (ON/OFF switch) Pin 1 2 Signal GND Power on pulse (low asserted) 1 Fan 1 connector 1 Pin 1 2 3 Signal GND Controlled fan voltage (0...+12 V) Not connected Fan 2 connector 1 Pin 1 2 3 Signal GND +12 V Fan sense Configuration Celeron (PGA 370) processors core frequency (300 - 433 MHz) i The clock frequency of the processor is set automatically. 6 - English A26361-D1131-Z180-3-7619 Installing Drivers Functions controlled by the switch block Function Password Skip Off Recovery BIOS Off Floppy write protect Off SW1 on off X X X X SW2 X X on off X X SW3 X X X X on off SW4 X X X X X X i Switch 4 (SW4) is reserved! Power Power requirement Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +5.0 V +12 V -12 V +3.3 V +5.0 V Maximum variation ±5 % ±10 % ±10 % ±5 % ±5 % Maximum current Comment 15 A 300 mA 100 mA 4A 50 mA 670 mA Wake on LAN Power loadability Fuse number 1 Maximum Fuse current 750 mA Function Universal serial bus (USB) Port A Keyboard Mouse Universal serial bus (USB) Port B Maximum function current 500 mA Not specified Not specified 500 mA 2 750 mA Installing Drivers Insert the "Drivers & Utilities" CD. When the DeskStart window appears, select SCENIC Pro. Select the language in which you want to operate the user interface. Select Operating System used. Select - Updates. A26361-D1131-Z180-3-7619 English - 7 Upgrades Upgrades Main memory Support: The system needs at least one module and can manage at most two SDRAM modules. PC100 modules must have an SPD-EEPROM*. It is not possible to mix SDRAM and EDO modules. Size: Technology: From 16 Mbytes up to 256 Mbytes SDRAM 66 or 100 MHz unbuffered DIMM modules. 168 pin, 3.3V, 100 MHz SDRAM 2M, 4M, 8M, 16M and 32M x 64 bit 2M, 4M, 8M, 16M and 32M x 72 bit (with ECC) For one socket 16, 32, 64 or 128 Mbyte Granularity: *: The EEPROM of PC100 / PC66 modules contains a number of critical timing parameters and data regarding the chip and the module vendor. Due to this the mainboard will properly recognize the module by reading all important timing parameters specified in the EEPROM via the Serial Presence Detect interface. Troubleshooting Error message BIOS update BIOS update for installed CPU failed If this error message occur, refer for further information to the description "BIOS Setup" which is delivered on the "Drivers & Utilities" CD. i The screen stays blank If your screen stays blank this may have the following cause: The wrong RAM memory module has been inserted See the chapter "Main Memory" for information which memory modules can be used. 8 - English A26361-D1131-Z180-3-7619