.com COMPONENT Additional Technical Manual System Board D1332, D1331, D1330 Are there ... ... any technical problems or other questions you need clarified? Please contact: · Our Hotline: Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 180 3777 005 · your sales outlet The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.com/mainboards Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1332-Z180-1-7619 Printed in the Federal Republic of Germany AG 0102 01/02 A26361-D1332-Z180-1-7619 System Board D1332 D1331 D1330 Additional Technical Manual January 2002 edition Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. Magic Packet is a registered trademark of Advanced Micro Devices, Inc. Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. Contents Introduction........................................................................................................................................1 Features ............................................................................................................................................2 Mechanics .........................................................................................................................................3 Connectors ........................................................................................................................................5 Power supply monitoring....................................................................................................5 Fan 1 connector.................................................................................................................5 Fan 2 connector.................................................................................................................5 Front panel connector ........................................................................................................6 Intrusion connector for case open detect for optional push-button (opener) .......................7 USB port C / D 1 - Dual channel ........................................................................................7 Wake On LAN (WOL) connector ........................................................................................8 CD-ROM audio connector (internal) ...................................................................................8 Audio front panel (internal).................................................................................................8 Auxiliary (MPEG, TV) audio connector (internal)................................................................9 Configuration .............................................................................................................................9 Functions controlled by the configuration switch ................................................................9 Power ......................................................................................................................................10 Power requirement for onboard components (worst case) ...............................................10 Power loadability..............................................................................................................10 Documentation ................................................................................................................................10 Installing drivers...............................................................................................................................11 Upgrading main memory..................................................................................................................11 Troubleshooting...............................................................................................................................11 Message BIOS update.............................................................................................................11 The screen stays blank............................................................................................................11 A26361-D1332-Z180-1-7619 Introduction i Depending on the configuration chosen, some of the hardware components described may not be available on your system board. You will find further information e. g. in the complete system board Technical Manual and in the "BIOS Setup" description. Further information regarding drivers is provided on the supplied drivers diskettes or on the "Drivers & Utilities" or "ServerStart" CD. For detailed information please read the "Installing drivers" chapter. The latest BIOS version and drivers can be found on the internet under http://www.fujitsu-siemens.com/en/service. ! Computer system boards and components contain very delicate IC chips. To protect them against damage caused by static electricity, you must follow these precautions: · · · Use a grounded wrist strap. Unplug your computer before you remove any part of the casing. Place the system board and the components on a grounded antistatic pad whenever you remove them from the computer. Hold components by the edge, do not touch any pins or connectors on them. Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring). A26361-D1332-Z180-1-7619 English - 1 Features Features The table shows assembly versions of this system board as an example. Features Chipset Board Size VGA onboard Audio onboard (AC '97) LAN onboard / with Alert-on-LAN Thermal Management onboard System Monitoring onboard Fujitsu Siemens Keyboard Power Button Support Buzzer onboard / int. Speaker Support Internal Connectors DIMM Sockets (DDR) AGP Slot (1/2/4x, 32 Bit, 66 Mhz, 1.5 V) PCI Slots (32Bit, 33 MHz, 5 V and 3,3 V) ISA Slot CNR Slot IDE Interfaces (Ultra DMA/100) Floppy Interface (up to 1,44 MB) Floppy Interface (up to 1,44 MB) with SMD CD / AUX Audio Input Front Panel Audio Output Wake-on-LAN Int. Serial Port / with SmartCard Support Int. USB Connectors with SmartCard Support Int. USB Connectors/shared with CNR External Connectors VGA Audio Mic. / in / out (2 x 0.5 W / 8 W) Game/MIDI LAN (RJ-45) PS/2 Mouse/Keyboard Ext. Serial Port (FIFO, 16550 compatible) Parallel Port (EPP/ECP) USB Connectors external m-ATX ü -/ü/2 1 3 1 2 1 1/1 1 1 -/1 2/1 D1330-B D1331-A Intel 845D m-ATX ü ü/ü/2 1 3 2 1 1/1 1 1 -/1 2/m-ATX ü ü/ü ü ü ü -/ü 2 1 D1332-A: 3 D1332-D: 1 2 1 1/1 1 1 -/ 1 2/D1332-A D1332-D 1/1/1 1 1/1 2 1 2 1/1/1 1 1 1/1 2 1 2 1/1/1 1 1 1/1 2 1 2 2 - English A26361-D1332-Z180-1-7619 Mechanics Mechanics Layout System board D1332 / D1331 / D1330 µ-ATX 9.6" x 9.6'' (243.84 mm x 243.84 mm) Some of the following connectors are optional and may therefore not be included on your system board. 13 4 5 6 8 2 7 9a 9b9c 1= 2= 3= 4= 5= 6= PS/2 mouse port PS/2 keyboard port Serial port 1 Parallel port Serial port 2 LAN port 7 = USB ports A and B 8 = Game/Midi port 9a = Audio Line-Out / Headphones 9b = Audio Line-In 9c = Audio Micro-In The components and connectors marked are not necessarily present on the system board. A26361-D1332-Z180-1-7619 English - 3 Mechanics 1 234 5 6 7 DIMM 2 DIMM 1 8 9 10 AGP PCI 1 15 PCI 2 PCI 3 14 1= 2= 3= 4= 5= 6= 7= 8= 9= Power supply Floppy disk drive IDE drives 3 and 4 (secondary) Power supply monitoring Connector for control panel IDE drives 1 and 2 (primary) Fan 2 Intrusion control USB port C / D 13 12 11 10 = Wake On LAN 11 = CD audio input 12 = Audio front panel 13 = AUX audio input 14 = Power supply +12V 15 = Fan 1 (e. g. for the processor) The components and connectors marked are not necessarily present on the system board. 4 - English A26361-D1332-Z180-1-7619 CNR Connectors Connectors ! Some of the following connectors are optional! Power supply monitoring 1 Pin 1 2 3 4 5 6 7 8 Signal AC Outlet on(high asserted) PS FAN Control (low asserted) PS FAN full on (low asserted) PS FAN C (max. 3mA) SMB CLK SMB DATA VCC EEPROM (+3,3V) GND Fan 1 connector (processor fan - controlled and supervised, only for 3 pin fans) Pin 1 2 3 Signal 1 GND Controlled fan voltage (0 V / 6...12 V) Fan sense Fan 2 connector (system fan - supervised) Pin 1 2 3 Signal GND +12 V Fan sense 1 A26361-D1332-Z180-1-7619 English - 5 Connectors Front panel connector Power On/Off 1) Reset 1) Message LED Sleep LED Power On 1) LED 1) 3) HD-LED 1 2 1) Sleep SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Sleep LED (Cathode) Sleep LED (Anode) Key PowerON_LED (Anode) PowerON_LED (Anode) `Sleep LED' and `Power On LED' Cathode (GND) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) Sleep Button (low asserted) Reset button (low asserted) Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal In case of `Sound via internal system speaker' support: Speaker Negativ Key GND In case of `Sound via internal system speaker' support: Speaker Positiv Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 6 - English A26361-D1332-Z180-1-7619 Connectors Intrusion connector for case open detect for optional push-button (opener) 1 Pin 1 2 3 Signal GND Case open (low asserted) Intrusion switch present (low asserted) 12 17 14 USB port C / D 1 - Dual channel (internal or external via special wire) 1 7 Pin 1 Signal VCC Dual / VCC (fused max. 500mA and power supervision with over current detection) Data negative (port C) Data positive (port C) GND Shield GND Pin 7 Signal Shield GND Pin 13 Signal Key 2 3 4 5 8 9 10 11 GND Data positive (port D) Data negative (port D) VCC Dual / VCC (fused max. 500mA and power supervision with over current detection) Power supply on (CCR on) (max. 1 second low pulse) 14 15 16 17 GND Data positive (port C) Data negative (port C) VCC Dual (fused max. 500mA and power supervision with over current detection) Key 6 Key 12 18 A26361-D1332-Z180-1-7619 English - 7 Connectors Wake On LAN (WOL) connector 1 Pin 1 2 3 Signal VCC Auxiliary GND Wake pulse (high asserted) CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input Audio front panel (internal) 1 2 Pin 1 3 5 7 9 Signal Analog GND Key Analog GND Analog GND Left line output* Pin 2 4 6 8 10 Signal Micro Input 12 V Analog GND Analog GND Right Line Output* * as stuffing option this can be configured as Headphone Out, but the rear out will in this case be a Line Out only otherwise the rear out is a Headphone Out. 8 - English A26361-D1332-Z180-1-7619 Connectors Auxiliary (MPEG, TV) audio connector (internal) 1 //Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input Configuration Functions controlled by the configuration switch Switch 1 1 2 2 3 3 4 4 Function Password skip Off Recovery BIOS Off Not used Not used Low auxiliary power supply (<2 A) High auxiliary power supply SKP on off on off RCV N.U. LAUX on off PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered wake devices (Wake On LAN, USB, PCI) in S3-S4. A26361-D1332-Z180-1-7619 English - 9 Documentation Power Power requirement for onboard components (worst case) Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +12 V -12 V +5.0 V +3.3 V +5.0 V Maximum variation ±5 % ±10 % ±5 % ±5 % ±5 % Maximum current Comment Power loadability Fuse number 1 Maximum fuse cur ...