User manual KONICA MINOLTA 7915 - annexe 1

7915 / 7920 Energy Star® As an ENERGY STAR® Partner, we have determined that this machine meets the ENERGY STAR® Guidelines for energy efficiency. *The ENERGY STAR® Guidelines are not met if printer controller Fiery Z4 is installed. What is an ENERGY STAR® Product? An ENERGY STAR® product has a special feature that allows it to automatically switch to a "lowpower mode" after a period of inactivity. An ENERGY STAR® product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Trademarks and Registered Trademarks Fiery and the Fiery logo are registered trademarks of Electronics for Imaging, Inc. Fiery X3e and Fiery Z4 are trademarks of Electronics for Imaging, Inc. All other product names mentioned are trademarks or registered trademarks of their respective companies. CONTENTS CONTENTS 1 Introduction 1.1 SAFETY INFORMATION .................................................................................................. 1-1 Warning and Precaution Symbols ..................................................................................... 1-1 Meaning of Symbols .......................................................................................................... 1-1 WARNING ......................................................................................................................... 1-2 CAUTION .......................................................................................................................... 1-3 Precautions for Routine Use ............................................................................................. 1-4 USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users) .............................. 1-5 INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 3) (For Canada Users)......................................................................... 1-5 For users in countries subject to Class B regulations ....................................................... 1-5 For users in countries not subject to Class B regulations ................................................. 1-5 Ozone Release.................................................................................................................. 1-6 WARNING LABEL............................................................................................................. 1-6 LED Radiation Safety ........................................................................................................ 1-7 Guide to Manuals ............................................................................................................ 1-7 Enclosed Manuals ............................................................................................................. 1-7 Explanation of Manual Conventions .................................................................................. 1-7 Explanation of Basic Concepts and Symbols .............................................................. 1-9 Paper Feeding ................................................................................................................... 1-9 "Width" and "Length" ....................................................................................................... 1-10 Paper Orientation ............................................................................................................ 1-10 Display Icons ................................................................................................................... 1-10 Features ......................................................................................................................... 1-11 1.2 1.3 1.4 2 Precautions 2.1 Installation Precautions .................................................................................................. 2-1 Installation site................................................................................................................... 2-1 Power source .................................................................................................................... 2-1 Space requirements .......................................................................................................... 2-2 Operation Precautions .................................................................................................... 2-3 Operating environment ...................................................................................................... 2-3 Proper use ......................................................................................................................... 2-3 Transporting the copier ..................................................................................................... 2-4 Care of copier supplies...................................................................................................... 2-4 Storage of copies .............................................................................................................. 2-4 Legal Restrictions on Copying ...................................................................................... 2-5 2.2 2.3 i CONTENTS 3 Before Making Copies 3.1 3.2 3.3 Available Features........................................................................................................... 3-1 Components and Their Functions ................................................................................. 3-6 Parts Names and Their Functions ................................................................................. 3-9 Exterior of Copier .............................................................................................................. 3-9 Interior of Copier.............................................................................................................. 3-11 Supplies and Parts .......................................................................................................... 3-12 Duplexing Document Feeder (Optional).......................................................................... 3-13 Duplex Unit (Optional) ..................................................................................................... 3-14 10-Mailbin Sorter (Optional) ............................................................................................ 3-15 Finisher (Optional)........................................................................................................... 3-16 Paper Feed Unit (Optional) ............................................................................................. 3-17 Large Capacity Tray (Optional) ....................................................................................... 3-18 Printer Controller Fiery Z4 ............................................................................................... 3-18 Printer Controller Fiery X3e ............................................................................................. 3-18 Names of Control Panel Parts and Their Functions................................................... 3-19 Names of Control Panel Parts and Their Functions ........................................................ 3-19 Using the Touch Panel.................................................................................................. 3-21 Description of Touch Panel ............................................................................................. 3-21 Organization of Screens.................................................................................................. 3-21 Operating the Touch Panel ............................................................................................. 3-23 Useful Operations ......................................................................................................... 3-24 Cancelling Settings.......................................................................................................... 3-24 Auto Panel Reset ............................................................................................................ 3-24 Energy Saver Mode......................................................................................................... 3-24 Delayed Copy Jobs ......................................................................................................... 3-25 Sleep Mode ..................................................................................................................... 3-25 Interrupting Copy Jobs .................................................................................................... 3-25 To interrupt a copy job..................................................................................................... 3-26 Auto Paper Source Change Feature ............................................................................... 3-26 Access Codes ................................................................................................................. 3-26 To enter an access code ................................................................................................. 3-27 Printing From the Computer ............................................................................................ 3-27 Scanning From the Computer ......................................................................................... 3-27 Power Switch and Default Settings ............................................................................. 3-28 Turning the copier on and off .......................................................................................... 3-28 To turn the copier on ....................................................................................................... 3-28 To turn the copier off ....................................................................................................... 3-28 Turning On the Copier..................................................................................................... 3-28 Default Settings ............................................................................................................... 3-29 3.4 3.5 3.6 3.7 ii CONTENTS 4 Copy Paper 4.1 Paper Specifications ....................................................................................................... 4-1 Paper Types ...................................................................................................................... 4-1 Paper Sizes ....................................................................................................................... 4-2 Paper Types To Be Avoided ............................................................................................. 4-5 Print Area ......................................................................................................................... 4-6 Paper Storage .................................................................................................................. 4-6 Loading Paper ................................................................................................................. 4-7 To load paper into the 1st drawer (250-sheet multipurpose tray)...................................... 4-7 To set the paper size for the 1st drawer.......................................................................... 4-10 To load paper into the 2nd drawer or the 500-sheet paper feed unit .............................. 4-11 To load paper into the large capacity tray ....................................................................... 4-13 To load paper into the manual bypass tray ..................................................................... 4-14 4.2 4.3 4.4 5 Original Documents 5.1 Feeding the Document.................................................................................................... 5-1 Document Paper Types..................................................................................................... 5-1 Precautions for Multi-Sheet Feeding and Single-Sheet Feeding ...................................... 5-2 Precautions for Manual Feeding ....................................................................................... 5-2 Feeding the Document Through the Duplexing Document Feeder ............................ 5-3 Multi-Sheet Feeding (Sheet Documents) .......................................................................... 5-3 To make copies using multi-sheet feeding (sheet documents) ......................................... 5-3 Multi-Sheet Feeding (Documents of Mixed Sizes) ............................................................ 5-4 To make copies using multi-sheet feeding (documents of mixed sizes) ........................... 5-4 Single-Sheet Feeding (Standard Paper/Thick Paper) ....................................................... 5-5 To make copies using single-sheet feeding ..................................................................... 5-5 Single-Sheet Feeding (Thin Paper)................................................................................... 5-6 To make copies using single-sheet feeding ...................................................................... 5-6 Positioning the Document on the Original Glass......................................................... 5-7 Manual Feeding (Sheet Documents)................................................................................. 5-8 To make copies using manual feeding (sheet documents) ............................................... 5-8 Manual Feeding (Transparent or Translucent Documents)............................................... 5-9 To make copies using manual feeding (transparent or translucent documents) ............... 5-9 Manual Feeding (Books) ................................................................................................. 5-10 To make copies using manual feeding (books) ............................................................... 5-10 Manual Feeding ("12-1/4 × 18" Paper)............................................................................ 5-11 To make copies using manual feeding ("12-1/4 × 18" paper).......................................... 5-11 5.2 5.3 iii CONTENTS 6 Basic Operations 6.1 6.2 6.3 Making Copies ................................................................................................................. 6-1 To copy a document (To make a basic copy) ................................................................... 6-1 Selecting the Paper Source ............................................................................................ 6-3 To select the paper source before copying ....................................................................... 6-3 Making Copies on Paper Loaded into the 1st Drawer (Multipurpose Paper Drawer) ......................................................................................... 6-4 To copy a document .......................................................................................................... 6-5 Feeding Paper Manually ................................................................................................. 6-6 To feed the paper manually............................................................................................... 6-6 To make copies onto overhead projector transparencies ................................................. 6-8 To make copies onto postcards ........................................................................................ 6-9 To make copies onto thick paper .................................................................................... 6-10 Specifying a Zoom Setting ........................................................................................... 6-12 To specify the zoom ratio before copying........................................................................ 6-13 To program a zoom ratio ................................................................................................. 6-14 To recall a programmed zoom ratio ................................................................................ 6-15 Selecting the Original Image Type............................................................................... 6-16 To select the document type before copying................................................................... 6-17 Specifying the Copy Density ........................................................................................ 6-18 To specify the copy density before copying .................................................................... 6-18 Interrupting a Copy Job................................................................................................ 6-20 To interrupt a copy job..................................................................................................... 6-20 6.4 6.5 6.6 6.7 6.8 7 Advanced Operations 7.1 Making Single-Sided/Double-Sided Copies .................................................................. 7-1 Single-Sided Ö Single-Sided: ............................................................................................. 7-1 Single-Sided Ö Double-Sided: ........................................................................................... 7-1 Single-Sided Ö Single­2in1: .............................................................................................. 7-1 Single-Sided Ö Double­2in1: ............................................................................................. 7-2 Double-Sided Ö Single-Sided: ........................................................................................... 7-2 Double-Sided Ö Double-Sided: .......................................................................................... 7-2 Book (Separation) Ö Single-Sided: .................................................................................... 7-2 Book (Spread) Ö Single-Sided: .......................................................................................... 7-2 Book (either Standard Book or RightBound) Ö Book Erase: .............................................. 7-3 To make settings for single- or double-sided documents and copies................................ 7-4 To make settings for copying a book................................................................................. 7-5 Finishing ("Sort" and "Group" settings)....................................................................... 7-7 Non-Sort: ........................................................................................................................... 7-7 Sort: ................................................................................................................................... 7-7 Group: ............................................................................................................................... 7-7 Sorting/Grouping ............................................................................................................... 7-8 To select the finishing settings .......................................................................................... 7-9 Staple Binding ............................................................................................................... 7-10 Types of stapling ............................................................................................................. 7-10 7.2 7.3 iv CONTENTS Staple position ................................................................................................................. 7-11 7.4 Hole Punching ("Hole-Punch" Setting) ....................................................................... 7-13 Types of hole punching ................................................................................................... 7-13 Punched hole position: .................................................................................................... 7-13 Feeding Documents of Different Sizes ("Mixed Orig Detection" Function) ............ 7-15 To set the "Mixed Orig Detection" function...................................................................... 7-15 Erasing Edges ("Frame Erase" Function)................................................................... 7-17 To set the "Frame Erase" function................................................................................... 7-17 Creating Mirror Image Copy ("Mirror Image" Function) ............................................ 7-19 To set the "Mirror Image" function ................................................................................... 7-19 Improving Copy Quality ("Color Adjustment" Function) .......................................... 7-20 To make color adjustments ............................................................................................. 7-20 To make test prints .......................................................................................................... 7-21 To adjust the hue............................................................................................................. 7-21 To adjust the saturation ................................................................................................... 7-22 To adjust the brightness .................................................................................................. 7-22 To adjust the sharpness .................................................................................................. 7-23 To adjust the contrast ...................................................................................................... 7-23 To adjust the color balance ............................................................................................. 7-24 To adjust the density ....................................................................................................... 7-24 Inserting Pages Between Copies of Overhead Transparencies ("OHP Interleaving" Function) ..................................................................................... 7-25 To set the "OHP Interleaving" function ............................................................................ 7-25 Specifying Different Vertical and Horizontal Scaling Proportions ("X/Y Zoom" Function).................................................................................................. 7-26 To specify the vertical and horizontal scaling proportions ............................................... 7-26 Reducing the Document to Postcard Size and Printing Multiple Copies on One Page ("Postcard" Function) ................................................................................................... 7-27 To set the "Postcard" function ......................................................................................... 7-27 Tiling Copies ("Image Repeat" Function) ................................................................... 7-29 To set the "Image Repeat" function ................................................................................. 7-29 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 v CONTENTS 8 Utility Mode Operations 8.1 8.2 8.3 Resetting the Copier ("Default Settings" Function)..................................................... 8-1 To specify the default settings........................................................................................... 8-1 Viewing Counters ("Meter Count" Function)................................................................ 8-2 To view the meter counts .................................................................................................. 8-3 Storing and Recalling Jobs ("Job Memory Input" Function) ...................................... 8-4 To store a job .................................................................................................................... 8-4 To delete a job................................................................................................................... 8-5 To recall a stored job......................................................................................................... 8-6 Specifying Default Settings ("User's Choice" Function)............................................. 8-7 To change the User's Choice settings............................................................................... 8-7 To set the "Language selected" parameter ....................................................................... 8-8 To set the "2in1copy zoom" parameter ............................................................................. 8-8 To set the "Intelligent Sorting" parameter.......................................................................... 8-9 To set the "ACS Determination level Adjust." parameter................................................. 8-10 To set the "Confirmation Beep" parameter...................................................................... 8-10 To set the "Mail Bin Assignment" parameter ................................................................... 8-11 To set the "Auto Panel Reset" parameter........................................................................ 8-12 To set the "Energy Save Mode" parameter ..................................................................... 8-12 To set the "Sleep Mode" parameter ................................................................................ 8-13 To set the "1st Drawer Paper Select" parameter............................................................. 8-13 8.4 9 Administrator Mode Operations 9.1 Supervising Copier Use ("Copy Track" Function) ....................................................... 9-1 To change the Administrator Mode settings ...................................................................... 9-1 To register access codes .................................................................................................. 9-2 To change the account numbers registered ...................................................................... 9-4 To reset Copy Track mode................................................................................................ 9-5 To check the number of copies made by each account .................................................... 9-5 To reset the counters for each account ............................................................................. 9-6 To limit the type of copies for an account .......................................................................... 9-7 To limit the number of copies for an account .................................................................... 9-8 Adjusting the Gradation Levels ("Gradation Adjust" Function) ............................... 9-10 To adjust the gradation levels ......................................................................................... 9-10 Turning off the Sleep function ("Disable Sleep Mode" Function) ............................ 9-12 To turn off the Sleep function .......................................................................................... 9-12 Erasing Copy Edges ("Erase" Function)..................................................................... 9-15 To set the "Erase" function .............................................................................................. 9-15 Specifying the Expert Settings ("Expert User's Mode" Function)............................ 9-17 To change the Expert User's Mode settings ................................................................... 9-17 To set the "Thick Paper and OHP Film Image Density" parameter................................. 9-18 To set the "Color Shift Correction" parameters ............................................................... 9-19 To set the "Stabilizer" parameter..................................................................................... 9-21 To set the "PRT Area (Top Margin)" parameter .............................................................. 9-22 To set the "PRT Area (Left Margin)" parameter .............................................................. 9-23 To set the "PRT Area (Dup. Left Margin)" parameter ...................................................... 9-24 9.2 9.3 9.4 9.5 vi CONTENTS To set the "Thin Orig." parameter.................................................................................... 9-26 9.6 Registering Scan Save Locations ("Scanner Addr. Input" Function) ...................... 9-27 10 Touch Panel Messages 10.1 When the Message "Replenish paper." Appears ....................................................... 10-1 To load paper into the 1st drawer (250-sheet multipurpose paper drawer) .................... 10-2 To load paper into the 500-sheet paper feed unit ........................................................... 10-3 To load paper into the large capacity tray ....................................................................... 10-4 When the Message "Please add Toner." Appears ..................................................... 10-6 To add toner .................................................................................................................... 10-7 When the Message "Replace Staple Cartridge X." Appears ................................... 10-10 To replace the staple cartridge...................................................................................... 10-10 When the Message "Misfeed detected." Appears.................................................... 10-14 Paper Misfeed in the Manual Bypass Tray.................................................................... 10-16 To clear a paper misfeed in the manual bypass tray..................................................... 10-16 Paper Misfeed in the Duplex Unit.................................................................................. 10-17 To clear a paper misfeed in the duplex unit .................................................................. 10-17 Paper Misfeed in the Paper Feed Unit .......................................................................... 10-18 To clear a paper misfeed in the paper feed unit............................................................ 10-18 Paper Misfeed in the Copier.......................................................................................... 10-20 To clear a paper misfeed in the copier .......................................................................... 10-20 Paper Misfeed in the Duplexing Document Feeder....................................................... 10-23 To clear a paper misfeed in the duplexing document feeder ........................................ 10-23 Paper Misfeed in Finisher FS-134/FS-133 .................................................................... 10-25 To clear a paper misfeed in finisher FS-134/FS-133..................................................... 10-25 Paper Misfeed in the 10-Mailbin Sorter ......................................................................... 10-28 To clear a paper misfeed in the 10-mailbin sorter ......................................................... 10-29 When the Message "Cannot staple." Appears ......................................................... 10-31 To clear jammed staples ............................................................................................... 10-31 When the Inspection Mark " " Appears ................................................................. 10-34 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 When the Message "Malfunction detected." Appears ............................................. 10-35 When the Message "Need to Replace XXXXX." Appears ........................................ 10-36 Other Messages........................................................................................................... 10-37 11 Troubleshooting 11.1 11.2 When Incorrect Copies are Produced ......................................................................... 11-1 When the Copier Is Not Operating Correctly .............................................................. 11-3 vii CONTENTS 12 Appendix 12.1 Specifications ................................................................................................................ 12-1 Copier Konica 7915/7920................................................................................................ 12-1 Duplexing Document Feeder DF-331.............................................................................. 12-3 500-sheet Paper Feed Unit PF-231 ................................................................................ 12-3 Large Capacity Tray DB-431........................................................................................... 12-3 Duplex Unit AD-231......................................................................................................... 12-4 10-Mailbin Sorter ST-134 ................................................................................................ 12-4 Finisher FS-134............................................................................................................... 12-5 Finisher FS-133............................................................................................................... 12-6 Care of the Copier ......................................................................................................... 12-7 Cleaning .......................................................................................................................... 12-7 Housing cover ................................................................................................................. 12-7 Original glass................................................................................................................... 12-7 Operation panel ............................................................................................................... 12-7 Document transfer belt .................................................................................................... 12-8 Function Combination Table ........................................................................................ 12-9 Function combination table ............................................................................................. 12-9 Function combination code keys ................................................................................... 12-11 Paper Size and Zoom Ratio Tables............................................................................ 12-12 Paper sizes.................................................................................................................... 12-12 Zoom ratios ................................................................................................................... 12-13 12.2 12.3 12.4 INDEX viii Introduction 1 1 Introduction Thank you for choosing Konica. To ensure the best performance and effective use of your copier, this manual will provide information on the following topics: G G G G G Getting to Know Your Copier Initial Steps . . . Settings for Making Copies Setting the Utility Mode Troubleshooting Please read this manual carefully before using your copier and keep it readily available at all times. Store the manual in the holder on the rear side of the copier. 1.1 SAFETY INFORMATION This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the next section before using this device. It contains important information related to user safety and preventing equipment problems. Make sure you observe all of the precautions listed in this manual. * Please note that some parts of the contents of this section may not correspond with the purchased product. Warning and Precaution Symbols Ignoring this warning could cause serious injury or even death. WARNING: CAUTION: Meaning of Symbols Ignoring this caution could cause injury or damage to property. A triangle indicates a danger against which you should take precaution. This symbol warns against possible electrical shock. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. Konica 7915/7920 1-1 1 WARNING Introduction · Do not modify this product, as a fire, electrical shock, or breakdown could result. · Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part that could cause an electrical shock. · Only use the power cord supplied in the package. Failure to use this cord could result in a fire or electrical shock. · Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock. · Do not use a multiple outlet adapter to connect any other appliances or machines. Use of a power outlet for more than the marked current value could result in a fire or electrical shock. Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result. Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock. · Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. · In principle, do not use an extension cord. Use of an extension cord could cause a fire or electrical shock. Contact your authorized service representative if an extension cord is required. Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or break-down. Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. · If this product becomes inordinately hot or emits smoke, or unusual odor or noise, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. · If this product has been dropped or its cover damaged, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner bottle or toner into a fire. The hot toner may scatter and cause burns or other damage. Connect the power cord to an electrical outlet that is equipped with a grounding terminal. 1-2 Konica 7915/7920 Introduction CAUTION 1 · Do not use flammable sprays, liquids, or gases near this product, as a fire could result. · Do not leave a toner bottle or imaging unit in a place within easy reach of children. Licking or ingesting any of these things could injure your health. · Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction. · Do not install this product at a site that is exposed to direct sunlight, or near an air conditioner or heating apparatus. The resultant temperature changes inside the product could cause a malfunction, fire, or electrical shock. · Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result. · Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock. It could drop or fall, causing personal injury or mechanical breakdown. · After installing this product, mount it on a secure base. If the unit moves or falls, it may cause personal injury. · Do not store imaging units near a floppy disk or watch that are susceptible to magnetism. They could cause these products to malfunction. The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution! High Temperature!" warning label. Do not place any objects around the power plug as the power plug may be difficult to pull out when an emergency occurs. · Always use this product in a well ventilated location. Operating the product in a poorly ventilated room for an extended period of time could injure your health. Ventilate the room at regular intervals. · Whenever moving this product, be sure to disconnect the power cord and other cables. Failure to do this could damage the cord or cable, resulting in a fire, electrical shock, or breakdown. · When moving this product, always hold it by the locations specified in the user's manual or other documents. If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction. · Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates between the plug terminals may cause a fire. · When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Konica 7915/7920 1-3 1 Precautions for Routine Use Introduction · Do not store toner bottles, imaging units, and other supplies and consumables in a place subject to direct sunlight and high temperature and humidity, as poor image quality and malfunction could result. · Do not attempt to replace the toner bottle and imaging unit in a place exposed to direct sunlight. If the PC drum is exposed to intense light, poor image quality could result. · Do not unpack a toner bottle or imaging unit until the very time of use. Do not leave an unpacked unit standing. Install it immediately or poor image quality could result. · Do not keep toner bottles and imaging units in an upright position or upside down, as poor image quality could result. · Do not throw or drop a toner bottle or imaging unit as poor image quality could result. · Do not use this product in an area where ammonia or other gases or chemicals are present. Failure to do so may shorten the service life of the product, cause damage or decrease performance. · Do not use this product in an environment with a temperature outside the range specified in the user's manual, as a breakdown or malfunction could result. · Do not attempt to feed stapled paper, carbon paper or aluminum foil through this product, as a malfunction or fire could result. Do not touch or scratch the surface of the imaging unit developing roller and the PC drum, as poor image quality could result. Use the supplies and consumables recommended by the dealer. Use of any supply or consumable not recommended could result in poor image quality and breakdown. 1-4 Konica 7915/7920 Introduction USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users) 1 NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WARNING: The design and production of this unit conform to FCC regulations, and any changes or modifications must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations. This device must be used with shielded interface (Parallel) cable and shielded network (10/ 100BaseT) cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under FCC rules. INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 3) (For Canada Users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. For users in countries subject to Class B regulations This device must be used with shielded interface (Parallel) cable and shielded network (10/ 100Base-T) cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR 22 and local rules. For users in countries not subject to Class B regulations WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This device must be used with shielded interface (Parallel) cable and shielded network (10/ 100Base-T) cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR 22 and local rules. Konica 7915/7920 1-5 1 Ozone Release Introduction Locate the machine in a Well Ventilated Room A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy and safe operating environment, it is recommended that the room be well ventilated. Placer l'appareil dans une pièce largement ventilée Une quantité d'ozone négligable est dégagée pendant le fonctionnement de l'appareil quand celui-ci est utilisé normalement. Cependant, une odeur désagréable peut être ressentie dans les pièces dont l'aération est insuffisante et lorsque une utilisation prolongée de l'appareil est effectuée. Pour avoir la certitude de travailler dans un environnment réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l'appareil. WARNING LABEL 1-6 Konica 7915/7920 Introduction 1 CAUTION Install this machine so that it can quickly be unplugged from the electrical outlet in case of an emergency. The socket-outlet shall be installed near the machine and shall be easily accessible. LED Radiation Safety This product is a copier which operates by means of a LED (light emitting diodes) exposure system. There is no possibility of danger from the LED optical radiation, because the LED optical radiation level does not exceed the accessible radiation limit of class 1 under all conditions of operation, maintenance, service and failure. 1.2 Guide to Manuals Enclosed Manuals The manuals listed below are enclosed with this copier. In order to refer to the User's Manual quickly when necessary, store it near the copier. G User's Manual The User's Manual describes the functions, operating procedures, precautions, and basic troubleshooting for this copier. Before using this copier, be sure to read the User's Manual thoroughly in order to ensure that the copier operates properly and is used efficiently. Quick Guide The Quick Guide provides basic operating procedures, maintenance, precautions, and basic troubleshooting for this copier in an easy-to-understand format. Refer to the Quick Guide if you do not understand an operation or if a problem occurs. G Explanation of Manual Conventions The marks and text formats used in this manual are described below. WARNING Failure to observe instructions highlighted in this manner may result in fatal or critical injuries. Observe all warnings in order to ensure safe use of the copier. CAUTION Failure to observe instructions highlighted in this manner may result in serious injuries or property damage. Observe all cautions in order to ensure safe use of the copier. Konica 7915/7920 1-7 1 Introduction Note (*May also appear as "Important" or "Tip") Text highlighted in this manner contains useful information and tips to ensure safe use of the copier. 1 The number 1 as formatted here indicates the first step of a sequence of actions. 2 Subsequent numbers as formatted here indicate subsequent steps of a sequence of actions. An illustration inserted here shows what operations must be performed. ? Text formatted in this style provides additional assistance. Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. 1-8 Konica 7915/7920 Introduction 1 1.3 Explanation of Basic Concepts and Symbols The use of words and symbols in this manual are explained below. Paper Feeding During printing, paper is supplied from the right side of the copier and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below. During copying, paper is supplied from the right side of the copier and fed into the copy tray on the top or the output option at the left with the printed surface of the copy facing down. The paper feed direction is shown by the arrows in the diagram below. Konica 7915/7920 1-9 1 "Width" and "Length" Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as "A" in the illustration) and the second to the length (shown as "B"). Introduction Paper Orientation Lengthwise ( ) If the width (A) of the paper is shorter than the length (B), the paper has a vertical or portrait orientation, indicated by either "L" or . Crosswise ( ) If the width (A) of the paper is longer than the length (B), the paper has a horizontal or landscape orientation, indicated by either "C" or . Display Icons The icons shown below are displayed when the corresponding paper is loaded or copy is made. G G G G : Overhead projector transparencies : Thick paper 1 : Second side of a double-sided copy : Second side of a double-sided copy on thick paper 1-10 Konica 7915/7920 Introduction 1 1.4 Features The Konica 7915/7920 is a high-speed, high-quality full-color copier/printer, combining the functionality and compactness best suited for any office. G Delivers high-speed, high-quality full-color copies: High-quality, business-standard images with a resolution of 600 dpi (true) × 1800 dpi (simulated)/256 variations High-speed full-color printing (Letter landscape/continuous copying) at 20 sheets per minute with the Konica 7920 (15 sheets per minute with the Konica 7915) Makes multiple copies from one scan Combines handling of a large paper capacity in a compact design: Lightweight, space-saving full-color copier Maximum paper capacity of 3,250 sheets (including optional paper cassettes) Can be combined with a wide variety of options: Duplexing document feeder, 10-mailbin sorter, paper feed unit, and duplex unit, etc., providing even more features Internal/external controller enables use as a network printer or scanner G G Konica 7915/7920 1-11 1 Introduction 1-12 Konica 7915/7920 Precautions 2 2 2.1 Precautions Installation Precautions Installation site To ensure utmost safety and prevent possible malfunctions, install the copier in a location that meets the following requirements. - A location away from curtains, etc. that may catch fire and burn easily A location that is not exposed to water or other liquids A location free from direct sunlight A location out of the direct airflow of an air conditioner or heater, and not exposed to extremely high or low temperatures A well-ventilated location A location that is not exposed to high humidity A location that is not extremely dusty A location not subjected to undue vibrations A stable and level location A location where ammonia or other organic gases are not generated A location that does not put the operator in the direct airflow of exhaust from the copier A location that is not near any kind of heating devices Power source The power source requirements are as follows. G G Voltage fluctuation: Maximum ±10% (AC 127 V areas only: between -10% and +6%) Frequency fluctuation: Maximum ±0.3% Use a power source with as little voltage or frequency fluctuations as possible. Konica 7915/7920 2-1 2 Space requirements Precautions To ensure easy copier operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below. 55 (1,397) 67-1/4 (1,707) 48 (1,222) 58-1/4 (1,477) 11-1/4(285) 47 (1,192) 10-3/4 (275) 8-1/4 (210) 20 (510) 31 (787) 4 (100) Unit: inch (mm) Note Be sure to allow a clearance of 4 in. (100 mm) or more at the back of the copier for the ventilation duct. 2-2 Konica 7915/7920 Precautions 2 2.2 Operation Precautions Operating environment The environmental requirements for correct operation of the copier are as follows. G G Temperature: 50°F (10°C) to 86°F (30°C) with fluctuations of no more than 18°F (10°C) within an hour Humidity: 25% to 85% with fluctuations of no more than 20% within an hour Proper use To ensure the optimum performance of the copier, follow the precautions listed below. - Never place heavy objects on the original glass or subject it to shocks. Never open any copier doors or turn off the copier while it is making copies; otherwise, a paper jam will occur. Never bring any magnetized object or use flammable sprays or liquids near the copier. Always make sure that the copier's power plug is visible and not hidden by the copier. of time. Always make sure that the power plug is completely plugged into the electrical outlet. Always unplug the copier from the electrical outlet if the unit is not to be used for a long period Always provide good ventilation when making a large number of continuous copies. CAUTION A negligible amount of ozone is generated during normal operation of this copier. An unpleasant odor may, however, be detected in poorly ventilated rooms during extensive copier operations. For a comfortable operating environment, it is recommended that the room be well ventilated. CAUTION If the ventilation duct at the top of the copier becomes blocked, the inside of the copier will accumulate heat, resulting in a malfunction or fire. Do not place any objects over the ventilation duct. CAUTION The area around the fusing unit is extremely hot. Be careful not to touch any parts around the fusing unit, other than those indicated in this manual, in order to reduce the risk of burns. Be especially careful not to touch parts marked with warning labels, and their surrounding areas. If you get burnt, immediately cool the skin under cold water, and then seek professional medical advice. Konica 7915/7920 2-3 2 Transporting the copier Precautions If you need to transport the copier over a long distance, consult your service representative. Care of copier supplies Use the following precautions when handling the copier supplies (toner, paper, etc.). Store the supplies in a location that meets the following requirements: free from direct sunlight away from any heating apparatus not subjected to high humidity not extremely dusty Store paper that has been removed from its wrapper but not loaded into the copier in a sealed plastic bag in a cool, dark place. - Only use toner that has been manufactured specifically for this copier. Never use other types of toner. Keep all supplies out of the reach of children. CAUTION Precautions for handling toner: Be careful not to spill toner inside the copier or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical advice. Storage of copies Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. - Copies pasted together using adhesive that contains solvent (e.g., spray glue) may dissolve the toner on the copies. Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color copy is folded, the toner at the fold may peel off. 2-4 Konica 7915/7920 Precautions 2 2.3 Legal Restrictions on Copying Certain types of documents must never be copied with the purpose or intent to pass copies of such documents off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible copying. G G G G G G Personal checks Travelers checks Money orders Certificates of deposit Bonds or other certificates of indebtedness Stock certificates Food stamps Postage stamps (canceled or uncanceled) Checks or drafts drawn by government agencies Internal revenue stamps (canceled or uncanceled) Passports Immigration papers Motor vehicle licenses and titles House and property titles and deeds Identification cards, badges, or insignias Copyrighted works without permission of the copyright owner G G G G G G G G G G In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Konica 7915/7920 2-5 2 Precautions 2-6 Konica 7915/7920 Before Making Copies 3 3 3.1 Before Making Copies Available Features The main copy settings available with this copier are listed below. For details on their operation, refer to the pages indicated. Orig. Ö Copy (Refer to page 7-1.) G Single-Sided Ö Single-Sided G Single-Sided Ö Double-Sided G Double-Sided Ö Single-Sided G Double-Sided Ö Double-Sided G Single-Sided Ö Single­2in1 Konica 7915/7920 3-1 3 G Before Making Copies Double-Sided Ö Double­2in1 4 4 3 G Book Ö Separation G Book Ö Spread Note The "Double-Sided" Original setting is only available if the duplexing document feeder is installed. The "Double-Sided" and the "Double­2in1" Copy settings are only available if the duplex unit and the memory are installed. Zoom settings (Refer to page 6-12.) G Reduced/Full Size/Enlarged Finishing (Refer to page 7-7, page 7-10, and page 7-13.) G "Sort" setting 3-2 Konica 7915/7920 Before Making Copies G 3 "Group" setting G "Staple" setting (Front staple) (Rear staple) (Double stapling) G "Hole-Punch" setting * Only with finisher FS-134 installed Note The "Sort" and "Group" settings are only available if the 10-mailbin sorter is installed. The "Staple" and "Hole-Punch" settings are only available if both the finisher and the printer controller are installed, and the print job is sent from the computer. Konica 7915/7920 3-3 3 Applications G Before Making Copies "OHP Interleaving" function (Refer to page 7-25.) G "Frame Erase" function (Refer to page 7-17.) G "Mirror Image" function (Refer to page 7-19.) G "X/Y Zoom" function (Refer to page 7-26.) G "Postcard" function (Refer to page 7-27.) G "Image Repeat" function (Refer to page 7-29.) 3-4 Konica 7915/7920 Before Making Copies 3 Note The "X/Y Zoom", "Postcard" and "Image Repeat" functions are only available if the memory is installed. (7915 only) "Mixed Orig Detection" function (Refer to page 7-15.) G Mixed originals Note The "Mixed Orig Detection" function is only available if the duplexing document feeder is installed. Konica 7915/7920 3-5 3 3.2 Components and Their Functions Before Making Copies The following describes each of the units that the copier is composed of as well as their functions. G Copier scanner section Scans the document G Copier printer section Prints the image scanned with the scanner G Original cover CV-131 (optional) Presses down on the loaded document G Duplexing document feeder DF-331 (optional) Automatically feeds and scans one document sheet at a time, and automatically turns over double-sided documents and scans them 3-6 Konica 7915/7920 Before Making Copies G 3 10-Mailbin sorter ST-134 (optional) When printing from the computer, automatically sorts or groups pages and feeds them into the mailbin specified at the computer G Finisher FS-134/FS-133 (optional) When printing from the computer, finishes pages according to the mode (sorting, grouping, stapling, or hole-punching [Only with finisher FS-134 installed.]) selected at the computer, then feeds out the pages G Duplex unit AD-231 (optional) Automatically turns over copies, allowing double-sided copies to be made G Paper feed unit PF-231 (optional) Can supply 500 sheets of paper; up to two paper feed units can be installed Konica 7915/7920 3-7 3 G Before Making Copies Large capacity tray DB-431 (optional) Can supply 2,500 sheets of paper G Copier stand (optional) Decreases the equipment area by installing the scanner above the copier G Copy desk (optional) Used when the optional 10-mailbin sorter (ST-134) or an optional finisher (FS-134/FS-133) is installed without an optional paper feed unit G Copy table (optional) Used when the optional 10-mailbin sorter (ST-134) or an optional finisher (FS-134/FS-133) is installed with two optional paper feed units installed G Printer controller Fiery X3e (optional) Internal printer controller that allows the copier to be used as both a color printer and a color scanner on a network Printer controller Fiery Z4 (optional) Allows the copier to be used as a color printer or color scanner configured into a computer network; provides higher productivity than printer controller Fiery X3e and enables use as a multifunctional printer G G Memory (256 MB: 128 MB × 2) MU-431 (optional with Konica 7915; standard installation with Konica 7920) Increases the memory of the copier, allowing functions such as double-sided and 2in1 copying to be performed Konica 7915/7920 3-8 Before Making Copies 3 3.3 Parts Names and Their Functions Exterior of Copier 1 6 2 7 3 8 4 9 5 10 12 13 14 15 18 17 16 11 19 20 21 22 * The original cover, copier stand, and copy desk shown installed in the illustration are optional. Konica 7915/7920 3-9 3 No. 1 2 3 4 Part Name Copy output tray Toner supply door Front door 1st drawer Description Holds copies fed out of the copier Opened when adding toner Opened when replacing the imaging unit See p. 10-36. Holds 250 sheets of paper The paper size can be adjusted freely. Special paper can be used. See p. 4-7. Holds 500 sheets of paper The paper size can be adjusted freely. See p. 4-11. Used to turn the copier on and off See p. 3-28. Opened when servicing the copier and clearing misfeeds Used to open and close the right-side door Used for manual feeding of paper The paper is fed one sheet at a time. Special paper can be used. See p. 4-14. Opened when clearing misfeeds Opened when servicing the copier Presses the document against the original glass Used to align the document See p. 5-8. Before Making Copies 5 6 7 8 9 2nd drawer Power switch Right-side door Right-side door release lever Manual bypass tray 10 11 12 13 14 Lower right-side door Left-side door Original cover (optional) Document scale Original glass When manually feeding the document, place it on the glass so the document can be scanned. Place the document face down on the glass. See p. 5-7. Used to start copying or to make settings See p. 3-19. Used for connecting the duplexing document feeder hookup cord Used for connecting the scanner hookup cord Used for connecting the scanner's power cord Used for connecting the scanner's power cord Used for connecting the scanner hookup cord Used for connecting the printer's power cord Used for connecting the sorter or finisher hookup cord 15 16 17 18 19 20 21 22 Control panel Duplexing document feeder connector Scanner connector Scanner power cord socket (inlet) Scanner power cord socket (outlet) Scanner connector Printer power cord socket Sorter/finisher connector 3-10 Konica 7915/7920 Before Making Copies Interior of Copier 3 1 4 2 3 No. 1 2 3 4 Part Name Toner hopper lid Imaging unit release lever Imaging unit removing bracket Upper right-side door Description Opened when adding toner Used to install and replace the imaging unit Used to remove the imaging unit Opened when replacing the fusing unit or clearing misfeeds